[PATCH 2/2] serial: sh: Add HSCIF support for R-Car SoC

[Marek Vasut]

From: Hai Pham <hai.pham.ud at renesas.com>

Provide the basic HSCIF support for R-Car SoC.

Reviewed-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud at renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
[Marek: Fill in HSSRR offset for Gen2 and SCBRR calculation for Gen2 and Gen3]
---
Cc: Simon Glass <sjg at chromium.org>
---
 doc/device-tree-bindings/serial/sh.txt |  2 +-
 drivers/serial/serial_sh.c             |  6 ++++++
 drivers/serial/serial_sh.h             | 26 ++++++++++++++++++++++----
 include/dm/platform_data/serial_sh.h   |  1 +
 4 files changed, 30 insertions(+), 5 deletions(-)

diff --git a/doc/device-tree-bindings/serial/sh.txt b/doc/device-tree-bindings/serial/sh.txt
index 99634a5e70c..7707a9cbe38 100644
--- a/doc/device-tree-bindings/serial/sh.txt
+++ b/doc/device-tree-bindings/serial/sh.txt
@@ -1,6 +1,6 @@
 * Renesas SCI serial interface
 
 Required properties:
-- compatible: must be "renesas,scif", "renesas,scifa" or "renesas,sci"
+- compatible: must be "renesas,scif", "renesas,hscif", "renesas,scifa" or "renesas,sci"
 - reg: exactly one register range with length
 - clock: input clock frequency for the SCI unit
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index e08bdcadc9c..20cda5dbe27 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -57,6 +57,9 @@ static void sh_serial_init_generic(struct uart_port *port)
 #if defined(CONFIG_RZA1)
 	sci_out(port, SCSPTR, 0x0003);
 #endif
+
+	if (port->type == PORT_HSCIF)
+		sci_out(port, HSSRR, HSSRR_SRE | HSSRR_SRCYC8);
 }
 
 static void
@@ -205,6 +208,7 @@ static const struct udevice_id sh_serial_id[] ={
 	{.compatible = "renesas,sci", .data = PORT_SCI},
 	{.compatible = "renesas,scif", .data = PORT_SCIF},
 	{.compatible = "renesas,scifa", .data = PORT_SCIFA},
+	{.compatible = "renesas,hscif", .data = PORT_HSCIF},
 	{}
 };
 
@@ -257,6 +261,8 @@ U_BOOT_DRIVER(serial_sh) = {
 	#define SCIF_BASE_PORT	PORT_SCIFA
 #elif defined(CFG_SCI)
 	#define SCIF_BASE_PORT  PORT_SCI
+#elif defined(CFG_HSCIF)
+	#define SCIF_BASE_PORT  PORT_HSCIF
 #else
 	#define SCIF_BASE_PORT	PORT_SCIF
 #endif
diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
index 128b0776dac..149ec1fe739 100644
--- a/drivers/serial/serial_sh.h
+++ b/drivers/serial/serial_sh.h
@@ -213,6 +213,10 @@ struct uart_port {
 #define SCFCR_TCRST 0x4000
 #define SCFCR_MCE   0x0008
 
+/* HSSRR */
+#define HSSRR_SRE	BIT(15)
+#define HSSRR_SRCYC8	0x0007
+
 #define SCI_MAJOR		204
 #define SCI_MINOR_START		8
 
@@ -242,7 +246,8 @@ struct uart_port {
 
 #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
 	static inline unsigned int sci_##name##_in(struct uart_port *port) {\
-		if (port->type == PORT_SCIF || port->type == PORT_SCIFB) {\
+		if (port->type == PORT_SCIF || port->type == PORT_SCIFB ||\
+		    port->type == PORT_HSCIF) {\
 			SCI_IN(scif_size, scif_offset)\
 		} else { /* PORT_SCI or PORT_SCIFA */\
 			SCI_IN(sci_size, sci_offset);\
@@ -250,7 +255,8 @@ struct uart_port {
 	}\
 static inline void sci_##name##_out(struct uart_port *port,\
 				unsigned int value) {\
-	if (port->type == PORT_SCIF || port->type == PORT_SCIFB) {\
+	if (port->type == PORT_SCIF || port->type == PORT_SCIFB ||\
+	    port->type == PORT_HSCIF) {\
 		SCI_OUT(scif_size, scif_offset, value)\
 	} else {	/* PORT_SCI or PORT_SCIFA */\
 		SCI_OUT(sci_size, sci_offset, value);\
@@ -375,6 +381,7 @@ SCIF_FNS(SCFDR,  0,  0, 0x1C, 16)
 SCIF_FNS(SCSPTR, 0,  0, 0x20, 16)
 SCIF_FNS(DL,     0,  0, 0x30, 16)
 SCIF_FNS(CKS,    0,  0, 0x34, 16)
+SCIF_FNS(HSSRR,  0,  0, 0x40, 16) /* HSCIF only */
 #if defined(CFG_SCIF_A)
 SCIF_FNS(SCLSR,  0,  0, 0x14, 16)
 #else
@@ -414,7 +421,9 @@ SCIF_FNS(SCSPTR,			0,  0, 0x20, 16)
 #endif
 SCIF_FNS(SCLSR,				0,  0, 0x24, 16)
 #endif
-SCIF_FNS(DL,				0,  0, 0x0,  0) /* dummy */
+SCIF_FNS(DL,				0,  0, 0x30, 16)
+SCIF_FNS(CKS,				0,  0, 0x34, 16)
+SCIF_FNS(HSSRR,				0,  0, 0x40, 16) /* HSCIF only */
 #endif
 #define sci_in(port, reg) sci_##reg##_in(port)
 #define sci_out(port, reg, value) sci_##reg##_out(port, value)
@@ -485,11 +494,20 @@ static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
 #define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk)
 #elif defined(CONFIG_RCAR_GEN2)
 #define DL_VALUE(bps, clk) (clk / bps / 16) /* External Clock */
- #if defined(CFG_SCIF_A)
+ #if defined(CFG_SCIF_A) || defined(CFG_HSCIF)
   #define SCBRR_VALUE(bps, clk) (clk / bps / 16 - 1) /* Internal Clock */
  #else
   #define SCBRR_VALUE(bps, clk) (clk / bps / 32 - 1) /* Internal Clock */
  #endif
+#elif defined(CONFIG_RCAR_64)
+static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
+{
+	if (port->type == PORT_SCIF)
+		return (clk + 16 * bps) / (32 * bps) - 1;
+	else /* PORT_HSCIF */
+		return clk / bps / 8 / 2 - 1; /* Internal Clock, Sampling rate = 8 */
+}
+#define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk)
 #else /* Generic SH */
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
 #endif
diff --git a/include/dm/platform_data/serial_sh.h b/include/dm/platform_data/serial_sh.h
index 69cd012fc5a..1a20285d92d 100644
--- a/include/dm/platform_data/serial_sh.h
+++ b/include/dm/platform_data/serial_sh.h
@@ -17,6 +17,7 @@ enum sh_serial_type {
 	PORT_SCIF,
 	PORT_SCIFA,
 	PORT_SCIFB,
+	PORT_HSCIF,
 };
 
 /*
-- 
2.39.2