[PATCH] ARM: dts: stm32: update vbus-supply of usbphyc_port0 on stm32mp157c-ev1

[Patrick DELAUNAY]

Hi,

On 12/12/22 11:32, Fabrice Gasnier wrote:
> phy-stm32-usbphyc bindings uses a connector node with vbus-supply
> property.
>
> [backport from linux 43e55d778a6b]
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
> ---
>
>   arch/arm/dts/stm32mp157c-ev1.dts | 4 ++++
>   1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
> index 07bcd7c50672..2d5db41ed67b 100644
> --- a/arch/arm/dts/stm32mp157c-ev1.dts
> +++ b/arch/arm/dts/stm32mp157c-ev1.dts
> @@ -393,6 +393,10 @@
>   	st,tune-squelch-level = <3>;
>   	st,tune-hs-rx-offset = <2>;
>   	st,no-lsfs-sc;
> +	connector {
> +		compatible = "usb-a-connector";
> +		vbus-supply = <&vbus_sw>;
> +	};
>   };
>   
>   &usbphyc_port1 {



Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>

Thanks
Patrick