[PATCH v2 0/9] Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7

[Eugen.Hristev at microchip.com]

On 1/3/23 17:35, Sergiu Moga wrote:
> This patch series originates from the bigger patch series:
> https://lists.denx.de/pipermail/u-boot/2022-December/502865.html
> 
> Add the basic DT USB definitions for SAM9X60, SAMA5D2 and SAMA7. The
> required pinctrl definitions have been added as well as additional
> definitions for the UTMI related clocks and their relationship with the
> Reset driver.
> 
> v1 -> v2:
> - split patches for SoC/Board separately
> - use usb@
> 
> Sergiu Moga (9):
>    ARM: dts: sam9x60: Add OHCI and EHCI DT nodes
>    ARM: dts: sam9x60_curiosity: Add pinctrl and gpio properties for USB
>    ARM: dts: sam9x60ek: Add pinctrl and gpio properties for USB
>    dt-bindings: reset: add sama7g5 definitions
>    dt-bindings: clk: at91: Define additional UTMI related clocks
>    ARM: dts: sama7g5: Add USB and UTMI DT nodes
>    ARM: dts: sama7g5ek: Add pinctrl, gpio and phy properties for USB
>    ARM: dts: sama5d2_icp: Add pinctrl nodes for USB related DT nodes
>    ARM: dts: sama5d27_wlsom1_ek: Add pinctrl nodes for USB DT nodes
> 
>   arch/arm/dts/at91-sam9x60_curiosity.dts   | 21 +++++++
>   arch/arm/dts/at91-sama5d27_wlsom1_ek.dts  | 25 ++++++++
>   arch/arm/dts/at91-sama5d2_icp.dts         | 22 +++++++
>   arch/arm/dts/at91-sama7g5ek.dts           | 34 +++++++++++
>   arch/arm/dts/sam9x60.dtsi                 | 18 ++++++
>   arch/arm/dts/sam9x60ek.dts                | 21 +++++++
>   arch/arm/dts/sama7g5.dtsi                 | 73 +++++++++++++++++++++++
>   include/dt-bindings/clk/at91.h            |  5 ++
>   include/dt-bindings/reset/sama7g5-reset.h | 10 ++++
>   9 files changed, 229 insertions(+)
>   create mode 100644 include/dt-bindings/reset/sama7g5-reset.h
> 


Hi Marek,

If you have nothing against it, I will take the DTs through at91 tree 
now, as I am preparing my PR for 2023.04 .
As DT is ABI and this series is on the list for a while now, I see no 
reason to delay it.
Are you fine with that ?

Thanks,
Eugen