[PATCH 0/6] stm32mp: Add support of OP-TEE and STM32MP13x in bsec driver

Patrick Delaunay patrick.delaunay at foss.st.com
Fri Jan 6 13:20:13 CET 2023

Add support of STM32MP13x in bsec driver with OP-TEE pseudo TA
and activate the associated commands fuse, stboard and stm32key.

This PTA is merged in OP-TEE master branch, and can be used
for STM32MP15X and STM32MP13X SoC to access to BSEC secured ressource.

This serie is a preliminary step for STM32MP13x USB support,
with serial number and for ETH with mac address.


Patrick Delaunay (6):
  stm32mp: cosmetic: Update of bsec driver
  stm32mp: Add OP-TEE support in bsec driver
  stm32mp: Add support of STM32MP13x in bsec driver
  configs: stm32mp13: Activate CONFIG_CMD_FUSE
  board: st: Add support of STM32MP13x boards in stm32board cmd
  configs: stm32mp13: Activate command stm32key

 arch/arm/mach-stm32mp/bsec.c              | 176 +++++++++++++++++++++-
 arch/arm/mach-stm32mp/cmd_stm32key.c      |   4 +-
 arch/arm/mach-stm32mp/include/mach/bsec.h |   7 +
 board/st/common/Kconfig                   |   2 +-
 board/st/common/cmd_stboard.c             |  12 +-
 configs/stm32mp13_defconfig               |   2 +
 doc/board/st/stm32mp1.rst                 |   6 +-
 7 files changed, 191 insertions(+), 18 deletions(-)


More information about the U-Boot mailing list