[PATCH] doc: fix references to distro documentation

[Soeren Moch]

Hi Dario,

On 08.01.23 11:07, Dario Binacchi wrote:
> Commit 37c5195dfcd157 ("doc: Move distro boot doc to rST") renamed
> doc/README.distro to doc/develop/distro.rst.
>
> Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
> ---
>
>   doc/README.gpt                   | 2 +-
>   doc/README.uniphier              | 2 +-
>   doc/board/emulation/qemu-x86.rst | 2 +-
>   doc/board/st/stm32mp1.rst        | 2 +-
>   doc/board/tbs/tbs2910.rst        | 2 +-
>   5 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/doc/README.gpt b/doc/README.gpt
> index 91e397d06f88..394cea0aa875 100644
> --- a/doc/README.gpt
> +++ b/doc/README.gpt
> @@ -177,7 +177,7 @@ To restore GUID partition table one needs to:
>        "name=u-boot,size=60MiB;name=boot,size=60Mib,bootable;name=rootfs,size=0"
>      It can be used to locate bootable disks with command
>      "part list <interface> <dev> -bootable <varname>",
> -   please check out doc/README.distro for use.
> +   please check out doc/develop/distro.rst for use.
>
>   2. Define 'CONFIG_EFI_PARTITION' and 'CONFIG_CMD_GPT'
>
> diff --git a/doc/README.uniphier b/doc/README.uniphier
> index badfacd66aa5..af746f6c316e 100644
> --- a/doc/README.uniphier
> +++ b/doc/README.uniphier
> @@ -336,7 +336,7 @@ Deployment for Distro Boot
>   --------------------------
>
>   UniPhier SoC family boot the kernel in a generic manner as described in
> -doc/README.distro .
> +doc/develop/distro.rst.
>
>   To boot the kernel, you need to deploy necesssary components to a file
>   system on one of your block devices (eMMC, NAND, USB drive, etc.).
> diff --git a/doc/board/emulation/qemu-x86.rst b/doc/board/emulation/qemu-x86.rst
> index db842f2ece6e..e605ae3ab32e 100644
> --- a/doc/board/emulation/qemu-x86.rst
> +++ b/doc/board/emulation/qemu-x86.rst
> @@ -57,7 +57,7 @@ to instantiate. Note, the maximum supported CPU number in QEMU is 255.
>   U-Boot uses 'distro_bootcmd' by default when booting on x86 QEMU. This tries to
>   load a boot script, kernel, and ramdisk from several different interfaces. For
>   the default boot order, see 'qemu-x86.h'. For more information, see
> -'README.distro'. Most Linux distros can be booted by writing a uboot script.
> +'distro.rst'. Most Linux distros can be booted by writing a uboot script.
>   For example, Debian (stretch) can be booted by creating a script file named
>   'boot.txt' with the contents::
>
> diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst
> index 3759df353ee5..0dcc6b783b89 100644
> --- a/doc/board/st/stm32mp1.rst
> +++ b/doc/board/st/stm32mp1.rst
> @@ -478,7 +478,7 @@ or:
>     +-------+--------+---------+------------------------+------------------------+
>
>   And the 4th partition (Rootfs) is marked bootable with a file extlinux.conf
> -following the Generic Distribution feature (doc/README.distro for use).
> +following the Generic Distribution feature (doc/develop/distro.rst for use).
>
>   The size of fip or ssbl partition must be enough for the associated binary file,
>   4MB and 2MB are default values.
> diff --git a/doc/board/tbs/tbs2910.rst b/doc/board/tbs/tbs2910.rst
> index e97f2b6e6135..4760922a93e6 100644
> --- a/doc/board/tbs/tbs2910.rst
> +++ b/doc/board/tbs/tbs2910.rst
> @@ -181,7 +181,7 @@ If that fails it will then try to boot from several interfaces using
>   'distro_bootcmd': It will first try to boot from the microSD slot, then the
>   SD slot, then the internal eMMC, then the SATA interface and finally the USB
>   interface. For more information on how to configure your distribution to boot,
> -see 'README.distro'.
> +see 'distro.rst'.
Please change 'distro.rst' to 'doc/develop/distro.rst' here.
Yes, the 'doc' was missing before, but with the additional 'develop'
directory it becomes even more difficult to find.

Thanks,
Soeren
>
>   Links:
>   ------