[RESEND,0/2] rpi: Copy eth PHY address from fw DT to loaded DT

[Jian-Hong Pan]

> Sjoerd Simons submitted the original patch (0001) to carry over some
> firmware-provided properties into the loaded device tree. This did not fix
> an issue with Raspberry Pi 400 rev 1.1 boards which would not be able to
> find the ethernet PHY device at the address specified by the kernel device
> tree.
>
> Patch 0002 expands on Sjoerd's design to also carry over the real ethernet
> PHY address, enabling the kernel to find and enable a working ethernet on
> pi 400 rev 1.1 boards.
>
>
> Antoine Mazeas (2):
>   rpi: Copy properties from firmware dtb to the loaded dtb
>   rpi: Copy eth PHY address from fw DT to loaded DT
>
>  board/raspberrypi/rpi/rpi.c | 51 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 51 insertions(+)

Thanks!!!  These patches help u-boot boot Endelss OS on RPi 400.

Tested-by: Jian-Hong Pan <jhp at endlessos.org>