[PATCH V5 00/12] AM68: Add support for AM68 Starter Kit

[Sinthu Raja]

From: Sinthu Raja <sinthu.raja at ti.com>

Hi All,
This series of patch add initial support for AM68 starter kit.
Design files can be referrred from https://www.ti.com/lit/zip/SPRR463

Refer below link to J721S2/AM68 Technical Reference Manual for further details:
http://www.ti.com/lit/pdf/spruj28

Link to kerenl patches:
https://lore.kernel.org/linux-arm-kernel/20221115154832.19759-4-sinthu.raja@ti.com/T/#mff5847ea8cdef49337d224b7147f877bcc833aee

Changes in V5:
=============
Address review comments:
- Add comment as per the review comment.

Changes in V4:
=============
Address review comments:
- In align wih the macro conditional statement which missed it in the previous version

Changes in V3:
=============
Address review comments:
- Rework on DTB selection API clarity about mini-U-Boot vs EVM and family support as suggested.
  * board: ti: j721s2: Add board_init and support for selecting DT based
    on EEPROM

Changes in V2:
=============
Address review comments:
- Remove support for detecting multiple device trees using different DTB
- Remove board specific API from K3 generic file (arch/arm/mach-k3/j721s2_init.c) and moved to board specific file (board/ti/j721s2/evm.c).
  * arch: mach-k3: Update board specific API name to K3 generic API name
  * board: ti: j721s2: Add board_init and support for selecting DT based
    on EEPROM
- Move board_is_xxx within CONFIG_TI_I2C_BOARD_DETECT block to maintain the "mini" U-Boot concept for this SoC.

V1: https://patchwork.ozlabs.org/project/uboot/cover/20221027104846.11820-1-sinthu.raja@ti.com/
V2: https://patchwork.ozlabs.org/project/uboot/cover/20221221135219.24702-1-sinthu.raja@ti.com/
V3: https://patchwork.ozlabs.org/project/uboot/cover/20221227121543.22306-1-sinthu.raja@ti.com/
V4: https://patchwork.ozlabs.org/project/uboot/cover/20230104094350.19394-1-sinthu.raja@ti.com/

Sinthu Raja (12):
  configs: j721s2_evm_r5: Enable support for building multiple dtbs into
    FIT
  configs: j721s2_evm_a72: Enable support for building multiple dtbs
    into FIT
  configs: j721s2_evm: Enable configs to store env in MMC FAT partition
  board: ti: j721s2: Add support to update board_name for am68-sk
  board: ti: j721s2: Enable support for reading EEPROM at next alternate
    address
  board: ti: j721s2: Add support for detecting multiple device trees
  arch: mach-k3: Update board specific API name to K3 generic API name
  board: ti: j721s2: Add board_init and support for selecting DT based
    on EEPROM
  arm: dts: Add initial support for AM68 Starter Kit System on Module
  arm: dts: Add support for A72 specific AM68 Starter Kit Base Board
  arm: dts: k3-am68-sk: Add r5 specific dt support
  include: configs: Update env for selecting right dtb

 arch/arm/dts/Makefile                         |   4 +-
 .../arm/dts/k3-am68-sk-base-board-u-boot.dtsi | 150 ++++++++
 arch/arm/dts/k3-am68-sk-base-board.dts        | 353 ++++++++++++++++++
 arch/arm/dts/k3-am68-sk-r5-base-board.dts     | 194 ++++++++++
 arch/arm/dts/k3-am68-sk-som.dtsi              | 127 +++++++
 arch/arm/mach-k3/include/mach/sys_proto.h     |   3 +
 arch/arm/mach-k3/j721s2_init.c                |  13 +-
 board/ti/j721s2/evm.c                         | 122 +++++-
 configs/j721s2_evm_a72_defconfig              |   4 +-
 configs/j721s2_evm_r5_defconfig               |   4 +
 include/configs/j721s2_evm.h                  |   4 +
 11 files changed, 960 insertions(+), 18 deletions(-)
 create mode 100644 arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-am68-sk-base-board.dts
 create mode 100644 arch/arm/dts/k3-am68-sk-r5-base-board.dts
 create mode 100644 arch/arm/dts/k3-am68-sk-som.dtsi

-- 
2.36.1