[RESEND PATCH V5 05/12] board: ti: j721s2: Enable support for reading EEPROM at next alternate address

[Sinthu Raja]

From: Sinthu Raja <sinthu.raja at ti.com>

J721S2 EVM has EEPROM populated at 0x50. AM68 SK has EEPROM populated at
next address 0x51 in order to be compatible with RPi. So start looking
for TI specific EEPROM at 0x50, if not found look for EEPROM at 0x51.

Signed-off-by: Sinthu Raja <sinthu.raja at ti.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
---

Changes in V5:
=============
Add Reviewed-by tag

 board/ti/j721s2/evm.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c
index 063fc8c688..db69aa1507 100644
--- a/board/ti/j721s2/evm.c
+++ b/board/ti/j721s2/evm.c
@@ -113,9 +113,15 @@ int do_board_detect(void)
 
 	ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS,
 					 CONFIG_EEPROM_CHIP_ADDRESS);
-	if (ret)
-		pr_err("Reading on-board EEPROM at 0x%02x failed %d\n",
-		       CONFIG_EEPROM_CHIP_ADDRESS, ret);
+	if (ret) {
+		printf("EEPROM not available at 0x%02x, trying to read at 0x%02x\n",
+		       CONFIG_EEPROM_CHIP_ADDRESS, CONFIG_EEPROM_CHIP_ADDRESS + 1);
+		ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS,
+						 CONFIG_EEPROM_CHIP_ADDRESS + 1);
+		if (ret)
+			pr_err("Reading on-board EEPROM at 0x%02x failed %d\n",
+				CONFIG_EEPROM_CHIP_ADDRESS + 1, ret);
+	}
 
 	return ret;
 }
-- 
2.36.1