U-Boot v2023.01 broken on riscv64 qemu virt platform: "fdt fixup event failed"
Tom Rini
trini at konsulko.com
Thu Jan 12 01:18:35 CET 2023
On Thu, Jan 12, 2023 at 01:16:43AM +0100, Heinrich Schuchardt wrote:
> On 1/12/23 01:04, Tom Rini wrote:
> > On Thu, Jan 12, 2023 at 01:01:55AM +0100, Heinrich Schuchardt wrote:
> > > On 1/12/23 00:59, Tom Rini wrote:
> > > > On Thu, Jan 12, 2023 at 12:40:05AM +0100, Heinrich Schuchardt wrote:
> > > > > On 1/12/23 00:29, Simon Glass wrote:
> > > > > > () Hi Heinrich,
> > > > > >
> > > > > > On Wed, 11 Jan 2023 at 16:22, Heinrich Schuchardt <xypron.glpk at gmx.de> wrote:
> > > > > > >
> > > > > > > On 1/11/23 20:08, Karsten Merker wrote:
> > > > > > > > Hello,
> > > > > > > >
> > > > > > > > it looks like U-Boot v2023.01 is currently broken for the riscv64
> > > > > > > > architecture on the qemu "virt" platform; the boot process of a
> > > > > > > > riscv64 VM fails during FDT fixup:
> > > > > > > >
> > > > > > > > -----8<----------8<----------8<----------8<----------8<----------8<-----
> > > > > > > >
> > > > > > > > OpenSBI v1.1
> > > > > > > > ____ _____ ____ _____
> > > > > > > > / __ \ / ____| _ \_ _|
> > > > > > > > | | | |_ __ ___ _ __ | (___ | |_) || |
> > > > > > > > | | | | '_ \ / _ \ '_ \ \___ \| _ < | |
> > > > > > > > | |__| | |_) | __/ | | |____) | |_) || |_
> > > > > > > > \____/| .__/ \___|_| |_|_____/|____/_____|
> > > > > > > > | |
> > > > > > > > |_|
> > > > > > > >
> > > > > > > > Platform Name : riscv-virtio,qemu
> > > > > > > > Platform Features : medeleg
> > > > > > > > Platform HART Count : 4
> > > > > > > > Platform IPI Device : aclint-mswi
> > > > > > > > Platform Timer Device : aclint-mtimer @ 10000000Hz
> > > > > > > > Platform Console Device : uart8250
> > > > > > > > Platform HSM Device : ---
> > > > > > > > Platform Reboot Device : sifive_test
> > > > > > > > Platform Shutdown Device : sifive_test
> > > > > > > > Firmware Base : 0x80000000
> > > > > > > > Firmware Size : 312 KB
> > > > > > > > Runtime SBI Version : 1.0
> > > > > > > >
> > > > > > > > Domain0 Name : root
> > > > > > > > Domain0 Boot HART : 2
> > > > > > > > Domain0 HARTs : 0*,1*,2*,3*
> > > > > > > > Domain0 Region00 : 0x0000000002000000-0x000000000200ffff (I)
> > > > > > > > Domain0 Region01 : 0x0000000080000000-0x000000008007ffff ()
> > > > > > > > Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
> > > > > > > > Domain0 Next Address : 0x0000000080200000
> > > > > > > > Domain0 Next Arg1 : 0x0000000082200000
> > > > > > > > Domain0 Next Mode : S-mode
> > > > > > > > Domain0 SysReset : yes
> > > > > > > >
> > > > > > > > Boot HART ID : 2
> > > > > > > > Boot HART Domain : root
> > > > > > > > Boot HART Priv Version : v1.12
> > > > > > > > Boot HART Base ISA : rv64imafdch
> > > > > > > > Boot HART ISA Extensions : time,sstc
> > > > > > > > Boot HART PMP Count : 16
> > > > > > > > Boot HART PMP Granularity : 4
> > > > > > > > Boot HART PMP Address Bits: 54
> > > > > > > > Boot HART MHPM Count : 16
> > > > > > > > Boot HART MIDELEG : 0x0000000000001666
> > > > > > > > Boot HART MEDELEG : 0x0000000000f0b509
> > > > > > > >
> > > > > > > >
> > > > > > > > U-Boot 2023.01+dfsg-1 (Jan 10 2023 - 03:18:09 +0000)
> > > > > > > >
> > > > > > > > CPU: rv64imafdch_zicsr_zifencei_zihintpause_zba_zbb_zbc_zbs_sstc
> > > > > > > > Model: riscv-virtio,qemu
> > > > > > > > DRAM: 8 GiB
> > > > > > > > Core: 31 devices, 15 uclasses, devicetree: board
> > > > > > > > Flash: 32 MiB
> > > > > > > > Loading Environment from nowhere... OK
> > > > > > > > In: serial at 10000000
> > > > > > > > Out: serial at 10000000
> > > > > > > > Err: serial at 10000000
> > > > > > > > Net: eth0: virtio-net#2
> > > > > > > > Working FDT set to ff7344b0
> > > > > > > > Hit any key to stop autoboot: 0
> > > > > > > >
> > > > > > > > Device 0: QEMU VirtIO Block Device
> > > > > > > > Type: Hard Disk
> > > > > > > > Capacity: 102400.0 MB = 100.0 GB (209715200 x 512)
> > > > > > > > ... is now current device
> > > > > > > > Scanning virtio 0:1...
> > > > > > > > Found /boot/extlinux/extlinux.conf
> > > > > > > > Retrieving file: /boot/extlinux/extlinux.conf
> > > > > > > > U-Boot menu
> > > > > > > > 1: Debian GNU/Linux bookworm/sid 6.1.0-1-riscv64
> > > > > > > > 2: Debian GNU/Linux bookworm/sid 6.1.0-1-riscv64 (rescue target)
> > > > > > > > 3: Debian GNU/Linux bookworm/sid 6.0.0-6-riscv64
> > > > > > > > 4: Debian GNU/Linux bookworm/sid 6.0.0-6-riscv64 (rescue target)
> > > > > > > > 5: Debian GNU/Linux bookworm/sid 6.0.0-5-riscv64
> > > > > > > > 6: Debian GNU/Linux bookworm/sid 6.0.0-5-riscv64 (rescue target)
> > > > > > > > Enter choice: 1: Debian GNU/Linux bookworm/sid 6.1.0-1-riscv64
> > > > > > > > Retrieving file: /boot/initrd.img-6.1.0-1-riscv64
> > > > > > > > Retrieving file: /boot/vmlinux-6.1.0-1-riscv64
> > > > > > > > append: root=/dev/vda1 rw noquiet
> > > > > > > > Moving Image from 0x84000000 to 0x80200000, end=815e5000
> > > > > > > > ## Flattened Device Tree blob at ff7344b0
> > > > > > > > Booting using the fdt blob at 0xff7344b0
> > > > > > > > Working FDT set to ff7344b0
> > > > > > > > Using Device Tree in place at 00000000ff7344b0, end 00000000ff738dea
> > > > > > > > Working FDT set to ff7344b0
> > > > > > > > ERROR: fdt fixup event failed: -22
> > > > > > > > - must RESET the board to recover.
> > > > > > > >
> > > > > > > > FDT creation failed! hanging...### ERROR ### Please RESET the board ###
> > > > > > > >
> > > > > > > > -----8<----------8<----------8<----------8<----------8<----------8<-----
> > > > > > > >
> > > > > > > > Software versions used:
> > > > > > > > - OpenSBI 1.1 (Debian package: opensbi 1.1-2)
> > > > > > > > - QEMU 7.2.0 (Debian package: qemu-system-misc 1:7.2+dfsg-1+b2)
> > > > > > > > - U-Boot v2023.01 (Debian package: u-boot-qemu 2023.01+dfsg-1)
> > > > > > > >
> > > > > > > > The issue is independent from the kernel that gets booted. With
> > > > > > > > U-Boot v2022.10 everything works without problems. I have used
> > > > > > > > git bisect (with qemu-riscv64_smode_defconfig) to narrow down the
> > > > > > > > specific change that triggers the issue and that has resulted in
> > > > > > > > the following commit:
> > > > > > > >
> > > > > > > > -----8<----------8<----------8<----------8<----------8<----------8<-----
> > > > > > > >
> > > > > > > > commit a56f663f07073713042bb0fd08053aeb667e717b (HEAD)
> > > > > > > > Author: Simon Glass <sjg at chromium.org>
> > > > > > > > Date: Thu Oct 20 18:23:14 2022 -0600
> > > > > > > >
> > > > > > > > vbe: Add info about the VBE device to the fwupd node
> > > > > > > >
> > > > > > > > At present we put the driver in the /chosen node in U-Boot. This is a bit
> > > > > > > > strange, since U-Boot doesn't normally use that node itself. It is better
> > > > > > > > to put it under the bootstd node.
> > > > > > > >
> > > > > > > > To make this work we need to copy create the node under /chosen when
> > > > > > > > fixing up the device tree. Copy over all the properties so that fwupd
> > > > > > > > knows what to do.
> > > > > > > >
> > > > > > > > Update the sandbox device tree accordingly.
> > > > > > > >
> > > > > > > > Signed-off-by: Simon Glass <sjg at chromium.org>
> > > > > > > >
> > > > > > > > -----8<----------8<----------8<----------8<----------8<----------8<-----
> > > > > > > >
> > > > > > > > If you should happen to run Debian/unstable, the easiest way to
> > > > > > > > reproduce the problem is as follows:
> > > > > > > >
> > > > > > > > $ sudo apt install qemu-system-misc opensbi u-boot-qemu
> > > > > > > >
> > > > > > > > You can then either manually set up a riscv64 VM image as described at
> > > > > > > > https://wiki.debian.org/RISC-V#Setting_up_a_riscv64_virtual_machine
> > > > > > > > or you can use a prebuilt VM image from the Debian Quick Image
> > > > > > > > Baker as described at https://people.debian.org/~gio/dqib/:
> > > > > > > >
> > > > > > > > $ wget -O riscv64-virt.zip https://gitlab.com/api/v4/projects/giomasce%2Fdqib/jobs/artifacts/master/download?job=convert_riscv64-virt
> > > > > > > > $ unzip -x riscv64-virt.zip
> > > > > > > > $ cd artifacts
> > > > > > > >
> > > > > > > > and boot the VM image with
> > > > > > > >
> > > > > > > > $ qemu-system-riscv64 -smp 4 -nographic -machine virt -m 8G -bios /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.elf -kernel /usr/lib/u-boot/qemu-riscv64_smode/u-boot.bin -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-device,rng=rng0 -append "console=ttyS0 rw root=/dev/vda1 scsi_mod.use_blk_mq=0" -device virtio-blk-device,drive=hd0 -drive file=image.qcow2,format=qcow2,id=hd0 -device virtio-net-device,netdev=usernet -netdev user,id=usernet,hostfwd=tcp::22222-:22
> > > > > > > >
> > > > > > > > Regards,
> > > > > > > > Karsten
> > > > > > >
> > > > > > > Thanks Karsten for reporting the issue.
> > > > > > >
> > > > > > > Bisection points to Simon's patch:
> > > > > > >
> > > > > > > a56f663f0707371
> > > > > > > vbe: Add info about the VBE device to the fwupd node
> > > > > > >
> > > > > > > In bootmeth_vbe_simple_ft_fixup() probing device vbe_simple fails
> > > > > > > because all fwupd related properties are missing in the QEMU device-tree.
> > > > > > >
> > > > > > > The following change is enough to make QEMU boot again:
> > > > > > >
> > > > > > > CONFIG_BOOTMETH_VBE=n
> > > > > > >
> > > > > > > @Simon:
> > > > > > >
> > > > > > > CONFIG_BOOTMETH_VBE should default to 'no' as only the sandbox provides
> > > > > > > the required data in the devicetree. Or bootmeth_vbe_simple_ft_fixup()
> > > > > > > should ignore a failure to probe vbe_simple.
> > > > > >
> > > > > > It is supposed to ignore that failure. Could it be that there is a bug
> > > > > > in vbe_find_next_device() that it should set *devp to NULL when it
> > > > > > doesn't find anything?
> > > > >
> > > > > The vbe_simple device exists on qemu-riscv64_smode_defconfig but cannot
> > > > > be probed.
> > > > >
> > > > > >
> > > > > > How come this failure does not show in CI?
> > > > >
> > > > > We currently lack tests to actually start a binary via the Linux legacy
> > > > > entry point.
> > > >
> > > > It would be good if we had more tests like test/nokia_rx51_test.sh that
> > > > booted up a full image. I feel like for platforms that are EBBR
> > > > compliant it should be less of a problem to do so than it is for
> > > > nokia_rx51 where part of the challenge is that we need the custom QEMU
> > > > for it at all.
> > > >
> > >
> > > The EBBR/EFI part is covered by starting GRUB.
> > >
> > > The missing part is booting non-EFI images.
> >
> > OK. FWIW, the nokia_rx51 script boots the system a number of ways.
> > While it would be great if this was part of pytest, that might be
> > a lot harder than just making more simple script to deal with grabbing
> > an image and ensuring the system boots in the right way. Once we've got
> > a few of these, we can then see what a more general solution looks like.
> >
>
> There is a patch series for TPM measurements when booting via bootm.
>
> Here too a test would require booting some binary that provides feedback
> after being launched by U-Boot.
>
> I guest we are only talking about tests on the sandbox and on QEMU.
Well, for CI, whatever can be run through QEMU / sandbox, yes. Real
hardware would also be good, but of course depends on the lab. And, I'm
not sure off-hand what we can/can't emulate in QEMU for sifive unleashed
for example, that might be helpful here.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20230111/ed5ded16/attachment.sig>
More information about the U-Boot
mailing list