[PATCH] ARM: dts: stm32: update vbus-supply of usbphyc_port0 on stm32mp157c-ev1

[Patrice CHOTARD]

Hi Fabrice

On 1/3/23 17:27, Patrick DELAUNAY wrote:
> Hi,
> 
> On 12/12/22 11:32, Fabrice Gasnier wrote:
>> phy-stm32-usbphyc bindings uses a connector node with vbus-supply
>> property.
>>
>> [backport from linux 43e55d778a6b]
>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
>> ---
>>
>>   arch/arm/dts/stm32mp157c-ev1.dts | 4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
>> index 07bcd7c50672..2d5db41ed67b 100644
>> --- a/arch/arm/dts/stm32mp157c-ev1.dts
>> +++ b/arch/arm/dts/stm32mp157c-ev1.dts
>> @@ -393,6 +393,10 @@
>>       st,tune-squelch-level = <3>;
>>       st,tune-hs-rx-offset = <2>;
>>       st,no-lsfs-sc;
>> +    connector {
>> +        compatible = "usb-a-connector";
>> +        vbus-supply = <&vbus_sw>;
>> +    };
>>   };
>>     &usbphyc_port1 {
> 
> 
> 
> Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> 
> Thanks
> Patrick
> 

Applied on u-boot-stm32/master

Thanks