[PATCH 2/3] configs: stm32: enable USB onboard HUB driver

[Patrice CHOTARD]

HI Fabrice

On 12/12/22 11:44, Fabrice Gasnier wrote:
> Activate the USB onboard HUB driver, that is used to enable the HUB supply
> on STM32MP15 EVAL, DK1 and DK2 boards.
> This avoids marking the 3v3 corresponding regulator as always-on.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
> ---
> 
>  configs/stm32mp15_basic_defconfig   | 1 +
>  configs/stm32mp15_defconfig         | 1 +
>  configs/stm32mp15_trusted_defconfig | 1 +
>  3 files changed, 3 insertions(+)
> 
> diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
> index 86ebbef0a6c8..4d2ac589931a 100644
> --- a/configs/stm32mp15_basic_defconfig
> +++ b/configs/stm32mp15_basic_defconfig
> @@ -164,6 +164,7 @@ CONFIG_USB=y
>  CONFIG_DM_USB_GADGET=y
>  CONFIG_USB_EHCI_HCD=y
>  CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_ONBOARD_HUB=y
>  CONFIG_USB_GADGET=y
>  CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
>  CONFIG_USB_GADGET_VENDOR_NUM=0x0483
> diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig
> index caa79e68834f..ccf65dd12223 100644
> --- a/configs/stm32mp15_defconfig
> +++ b/configs/stm32mp15_defconfig
> @@ -140,6 +140,7 @@ CONFIG_USB=y
>  CONFIG_DM_USB_GADGET=y
>  CONFIG_USB_EHCI_HCD=y
>  CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_ONBOARD_HUB=y
>  CONFIG_USB_GADGET=y
>  CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
>  CONFIG_USB_GADGET_VENDOR_NUM=0x0483
> diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
> index 3309c2e79246..a553038a42c5 100644
> --- a/configs/stm32mp15_trusted_defconfig
> +++ b/configs/stm32mp15_trusted_defconfig
> @@ -140,6 +140,7 @@ CONFIG_USB=y
>  CONFIG_DM_USB_GADGET=y
>  CONFIG_USB_EHCI_HCD=y
>  CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_ONBOARD_HUB=y
>  CONFIG_USB_GADGET=y
>  CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
>  CONFIG_USB_GADGET_VENDOR_NUM=0x0483

Applied on u-boot-stm32/master

Thanks