[PATCH 1/3] sunxi: mmc: ignore card detect in SPL
Andre Przywara
andre.przywara at arm.com
Fri Jan 13 01:05:24 CET 2023
On Sun, 8 Jan 2023 15:00:29 -0600
Samuel Holland <samuel at sholland.org> wrote:
Hi Samuel,
> Thanks for helping to get rid of sunxi_name_to_gpio().
many thanks for the review, that's much appreciated.
>
> On 7/13/22 11:21, Andre Przywara wrote:
> > The sunxi MMC code does not use the DM in the SPL, as we don't have a
> > device tree available that early, also no space for it.
> > This also means we cannot access the card-detect GPIO information from
> > there, so we have Kconfig symbols called CONFIG_MMCx_CD_PIN, which each
> > board has to define. This is a burden, also requires extra GPIO code in
> > the SPL.
> > As the SPL is the natural successor of the BootROM (from which we are
> > loaded), we can actually ignore the CD pin completely, as this is what
> > the BootROM does as well: CD GPIOs are board specific, but the BootROM
> > is not, so accesses the MMC devices anyway.
>
> The card detection logic is useless for an even simpler reason: because
> of our spl_boot_device() implementation, SPL only accesses the MMC
> interface where SPL itself was originally read from. Therefore, it must
> have a card inserted.
Indeed, I thought I mentioned this as well, but didn't. I added a
sentence to that effect to the commit message (and removed the
underscore in the comment below).
Cheers,
Andre
>
> > Remove the card detect code from the non-DM implementation of the sunxi
> > MMC driver, to get rid of this unneeded code.
> >
> > Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> > ---
> > drivers/mmc/sunxi_mmc.c | 37 ++-----------------------------------
> > 1 file changed, 2 insertions(+), 35 deletions(-)
> >
> > diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
> > index 1bb7b6d0e9..b2f7e2d142 100644
> > --- a/drivers/mmc/sunxi_mmc.c
> > +++ b/drivers/mmc/sunxi_mmc.c
> > @@ -44,22 +44,10 @@ struct sunxi_mmc_priv {
> > /* support 4 mmc hosts */
> > struct sunxi_mmc_priv mmc_host[4];
> >
> > -static int sunxi_mmc_getcd_gpio(int sdc_no)
> > -{
> > - switch (sdc_no) {
> > - case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN);
> > - case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN);
> > - case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN);
> > - case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN);
> > - }
> > - return -EINVAL;
> > -}
> > -
> > static int mmc_resource_init(int sdc_no)
> > {
> > struct sunxi_mmc_priv *priv = &mmc_host[sdc_no];
> > struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
> > - int cd_pin, ret = 0;
> >
> > debug("init mmc %d resource\n", sdc_no);
> >
> > @@ -90,16 +78,7 @@ static int mmc_resource_init(int sdc_no)
> > }
> > priv->mmc_no = sdc_no;
> >
> > - cd_pin = sunxi_mmc_getcd_gpio(sdc_no);
> > - if (cd_pin >= 0) {
> > - ret = gpio_request(cd_pin, "mmc_cd");
> > - if (!ret) {
> > - sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP);
> > - ret = gpio_direction_input(cd_pin);
> > - }
> > - }
> > -
> > - return ret;
> > + return 0;
> > }
> > #endif
> >
> > @@ -523,23 +502,11 @@ static int sunxi_mmc_send_cmd_legacy(struct mmc *mmc, struct mmc_cmd *cmd,
> > return sunxi_mmc_send_cmd_common(priv, mmc, cmd, data);
> > }
> >
> > -static int sunxi_mmc_getcd_legacy(struct mmc *mmc)
> > -{
> > - struct sunxi_mmc_priv *priv = mmc->priv;
> > - int cd_pin;
> > -
> > - cd_pin = sunxi_mmc_getcd_gpio(priv->mmc_no);
> > - if (cd_pin < 0)
> > - return 1;
> > -
> > - return !gpio_get_value(cd_pin);
> > -}
> > -
> > +/* .get_cd is not needed by the SPL */
>
> nit: s/get_cd/getcd/
>
> Reviewed-by: Samuel Holland <samuel at sholland.org>
> Tested-by: Samuel Holland <samuel at sholland.org>
>
> > static const struct mmc_ops sunxi_mmc_ops = {
> > .send_cmd = sunxi_mmc_send_cmd_legacy,
> > .set_ios = sunxi_mmc_set_ios_legacy,
> > .init = sunxi_mmc_core_init,
> > - .getcd = sunxi_mmc_getcd_legacy,
> > };
> >
> > struct mmc *sunxi_mmc_init(int sdc_no)
>
>
More information about the U-Boot
mailing list