[PATCH 4/9] arm: dts: k3-am625-sk: Add pin control for TIDSS and add panel device tree node

[Nikhil M Jain]

Device tree node for panel(Microtips-Model No: 13-101HIEBCAF0-S)
is created, which includes timing parameters of the panel,
data-mapping and ports which are read by the code to set
bus formats, clock required by the panel. Generic simple_panel
driver is being used.

Link dss and panel by setting the port name in remote-endpoint.

main_dss0_pins_default - setting for pinmux.

Signed-off-by: Nikhil M Jain <n-jain1 at ti.com>
---
 arch/arm/dts/k3-am625-sk.dts | 82 ++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/arch/arm/dts/k3-am625-sk.dts b/arch/arm/dts/k3-am625-sk.dts
index 76b06ea239..1580fd073a 100644
--- a/arch/arm/dts/k3-am625-sk.dts
+++ b/arch/arm/dts/k3-am625-sk.dts
@@ -56,6 +56,39 @@
 			no-map;
 		};
 	};
+
+	panel {
+		compatible = "simple-panel";
+		status= "okay";
+		width-mm = <217>;
+		height-mm = <136>;
+		data-mapping = "vesa";
+		data-width = <24>;
+		display-timings {
+			timings at 0 {
+				clock-frequency = <150274>;
+				hactive = <1920>;
+				vactive = <1200>;
+				hback-porch = <32>;
+				hfront-porch = <52>;
+				vback-porch = <24>;
+				vfront-porch = <8>;
+				hsync-len = <24>;
+				vsync-len = <3>;
+				de-active = <1>;
+			};
+		};
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port at 0 {
+				reg = <0>;
+				lvds_in0: endpoint {
+					remote-endpoint = <&oldi_out0>;
+				};
+			};
+		};
+	};
 };
 
 &main_pmx0 {
@@ -77,6 +110,39 @@
 			AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
 		>;
 	};
+
+	main_dss0_pins_default: main-dss0-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+			AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+			AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+			AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+			AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+			AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+			AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+			AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+			AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+			AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+			AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+			AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+			AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+			AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+			AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+			AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+			AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+			AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+			AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+			AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
+			AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
+			AM62X_IOPAD(0x0064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
+			AM62X_IOPAD(0x0068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
+			AM62X_IOPAD(0x006c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
+			AM62X_IOPAD(0x0070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
+			AM62X_IOPAD(0x0074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
+			AM62X_IOPAD(0x0078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
+		>;
+	};
 };
 
 &wkup_uart0 {
@@ -148,3 +214,19 @@
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_dss0_pins_default>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	port at 0 {
+		reg = <0>;
+		oldi_out0: endpoint {
+			remote-endpoint = <&lvds_in0>;
+		};
+	};
+};
-- 
2.17.1