kwboot: UART booting with bin_hdr u-boot (Marvell Armada 385)

[Pali Rohár]

On Wednesday 11 January 2023 21:56:41 Pali Rohár wrote:
> On Wednesday 11 January 2023 12:44:45 Tony Dinh wrote:
> > Hi Pali,
> > 
> > On Wed, Jan 11, 2023 at 12:04 AM Pali Rohár <pali at kernel.org> wrote:
> > >
> > > On Tuesday 10 January 2023 21:07:45 Tony Dinh wrote:
> > > > Hi Pali,
> > > >
> > > > I got burned for being lazy :) it turned out that the mix of #ifdef
> > > > and #if defined was the problem. Just stepped away and came back for a
> > > > few minutes and I can see that I just need to define the CONFIG_DDR4
> > > > properly in arch/arm/mach-mvebu/Kconfig and build it to pass the
> > > > CONFIG_DDR4 stuff.
> > > >
> > > > One more small hurdle after that was CONFIG_USE_PRIVATE_LIBGCC must be
> > > > undefined for it to build (so I am using
> > > > /usr/lib/gcc/arm-linux-gnueabi/10/libgcc.a, and not using
> > > > arch/arm/lib/lib.a)
> > >
> > > Hello! It is normally a good idea to unset CONFIG_USE_PRIVATE_LIBGCC
> > > unless you have compiled gcc for target CPU.
> > 
> > CONFIG_USE_PRIVATE_LIBGCC was set as a default for ARM target, since
> > u-boot has arch/arm/lib/lib.a. But using arch/arm/lib/lib.a I got
> > several build errors like these:
> > 
> > ld.bfd: drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.o: in
> > function `mv_ddr4_copt_get':
> > /usr/src/u-boot/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:809:
> > undefined reference to `__aeabi_i2d'
> > ld.bfd: /usr/src/u-boot/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:809:
> > undefined reference to `__aeabi_dmul'
> > ld.bfd: /usr/src/u-boot/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:809:
> > undefined reference to `__aeabi_d2uiz'
> 
> This looks like a bug in that training code. I would need to see source
> code, so I can figure out how to fix it.

Have you solved this issue? Or if not, can you show what you had on that
problematic line 809?