[PATCH 2/2] ARM: meson: switch AXG & GX dwc2 otg to DM
Mattijs Korpershoek
mkorpershoek at baylibre.com
Tue Jan 17 10:43:56 CET 2023
On Tue, Jan 17, 2023 at 10:11, Neil Armstrong <neil.armstrong at linaro.org> wrote:
> With CONFIG_DM_USB_GADGET=y, we no longer need any board_usb_*() logic
> because:
> * the dwc2 driver is DM compatible, and handles its own clock enabling
> * the dwc3-meson-gxl glue drivers handles "force mode switching"
>
> Remove all mach-meson gx & axg usb code and enable CONFIG_DM_USB_GADGET.
>
> Note: Only configs having both CONFIG_USB_DWC3_MESON_GXL=y *and*
> USB_GADGET_DWC2_OTG=y have been updated.
>
> Thanks for the original work from Mattijs at [1]
>
> [1] https://lore.kernel.org/all/20221024-meson-dm-usb-v1-2-2ab077a503b9@baylibre.com/
>
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
> ---
> arch/arm/mach-meson/board-axg.c | 129 ---------------------------------
> arch/arm/mach-meson/board-gx.c | 137 -----------------------------------
> configs/jethub_j100_defconfig | 1 +
> configs/jethub_j80_defconfig | 1 +
> configs/khadas-vim2_defconfig | 1 +
> configs/khadas-vim_defconfig | 1 +
> configs/libretech-ac_defconfig | 1 +
> configs/libretech-cc_defconfig | 1 +
> configs/libretech-s905d-pc_defconfig | 1 +
> configs/libretech-s912-pc_defconfig | 1 +
> configs/s400_defconfig | 1 +
> configs/wetek-core2_defconfig | 1 +
> 12 files changed, 10 insertions(+), 266 deletions(-)
>
> diff --git a/arch/arm/mach-meson/board-axg.c b/arch/arm/mach-meson/board-axg.c
> index 236ec81579..fdf18752cd 100644
> --- a/arch/arm/mach-meson/board-axg.c
> +++ b/arch/arm/mach-meson/board-axg.c
> @@ -15,12 +15,6 @@
> #include <asm/io.h>
> #include <asm/armv8/mmu.h>
> #include <linux/sizes.h>
> -#include <usb.h>
> -#include <linux/usb/otg.h>
> -#include <asm/arch/usb-gx.h>
> -#include <usb/dwc2_udc.h>
> -#include <clk.h>
> -#include <phy.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -90,126 +84,3 @@ static struct mm_region axg_mem_map[] = {
> };
>
> struct mm_region *mem_map = axg_mem_map;
> -
> -#if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \
> - CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
> -static struct dwc2_plat_otg_data meson_gx_dwc2_data;
> -
> -int board_usb_init(int index, enum usb_init_type init)
> -{
> - struct fdtdec_phandle_args args;
> - const void *blob = gd->fdt_blob;
> - int node, dwc2_node;
> - struct udevice *dev, *clk_dev;
> - struct clk clk;
> - int ret;
> -
> - /* find the usb glue node */
> - node = fdt_node_offset_by_compatible(blob, -1,
> - "amlogic,meson-axg-usb-ctrl");
> - if (node < 0) {
> - debug("Not found usb-control node\n");
> - return -ENODEV;
> - }
> -
> - if (!fdtdec_get_is_enabled(blob, node)) {
> - debug("usb is disabled in the device tree\n");
> - return -ENODEV;
> - }
> -
> - ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
> - if (ret) {
> - debug("Not found usb-control device\n");
> - return ret;
> - }
> -
> - /* find the dwc2 node */
> - dwc2_node = fdt_node_offset_by_compatible(blob, node,
> - "amlogic,meson-g12a-usb");
> - if (dwc2_node < 0) {
> - debug("Not found dwc2 node\n");
> - return -ENODEV;
> - }
> -
> - if (!fdtdec_get_is_enabled(blob, dwc2_node)) {
> - debug("dwc2 is disabled in the device tree\n");
> - return -ENODEV;
> - }
> -
> - meson_gx_dwc2_data.regs_otg = fdtdec_get_addr(blob, dwc2_node, "reg");
> - if (meson_gx_dwc2_data.regs_otg == FDT_ADDR_T_NONE) {
> - debug("usbotg: can't get base address\n");
> - return -ENODATA;
> - }
> -
> - /* Enable clock */
> - ret = fdtdec_parse_phandle_with_args(blob, dwc2_node, "clocks",
> - "#clock-cells", 0, 0, &args);
> - if (ret) {
> - debug("usbotg has no clocks defined in the device tree\n");
> - return ret;
> - }
> -
> - ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &clk_dev);
> - if (ret)
> - return ret;
> -
> - if (args.args_count != 1) {
> - debug("Can't find clock ID in the device tree\n");
> - return -ENODATA;
> - }
> -
> - clk.dev = clk_dev;
> - clk.id = args.args[0];
> -
> - ret = clk_enable(&clk);
> - if (ret) {
> - debug("Failed to enable usbotg clock\n");
> - return ret;
> - }
> -
> - meson_gx_dwc2_data.rx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
> - "g-rx-fifo-size", 0);
> - meson_gx_dwc2_data.np_tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
> - "g-np-tx-fifo-size", 0);
> - meson_gx_dwc2_data.tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
> - "g-tx-fifo-size", 0);
> -
> - /* Switch to peripheral mode */
> - ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_PERIPHERAL);
> - if (ret)
> - return ret;
> -
> - return dwc2_udc_probe(&meson_gx_dwc2_data);
> -}
> -
> -int board_usb_cleanup(int index, enum usb_init_type init)
> -{
> - const void *blob = gd->fdt_blob;
> - struct udevice *dev;
> - int node;
> - int ret;
> -
> - /* find the usb glue node */
> - node = fdt_node_offset_by_compatible(blob, -1,
> - "amlogic,meson-axg-usb-ctrl");
> - if (node < 0) {
> - debug("Not found usb-control node\n");
> - return -ENODEV;
> - }
> -
> - if (!fdtdec_get_is_enabled(blob, node))
> - return -ENODEV;
> -
> - ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
> - if (ret)
> - return ret;
> -
> - /* Switch to OTG mode */
> - ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_HOST);
> - if (ret)
> - return ret;
> -
> - return 0;
> -}
> -#endif
> diff --git a/arch/arm/mach-meson/board-gx.c b/arch/arm/mach-meson/board-gx.c
> index 01fafd81c4..f28f84d86f 100644
> --- a/arch/arm/mach-meson/board-gx.c
> +++ b/arch/arm/mach-meson/board-gx.c
> @@ -16,12 +16,6 @@
> #include <asm/io.h>
> #include <asm/armv8/mmu.h>
> #include <linux/sizes.h>
> -#include <usb.h>
> -#include <linux/usb/otg.h>
> -#include <asm/arch/usb-gx.h>
> -#include <usb/dwc2_udc.h>
> -#include <clk.h>
> -#include <phy.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -108,134 +102,3 @@ static struct mm_region gx_mem_map[] = {
> };
>
> struct mm_region *mem_map = gx_mem_map;
> -
> -#if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \
> - CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
> -static struct dwc2_plat_otg_data meson_gx_dwc2_data;
> -
> -int board_usb_init(int index, enum usb_init_type init)
> -{
> - struct fdtdec_phandle_args args;
> - const void *blob = gd->fdt_blob;
> - int node, dwc2_node;
> - struct udevice *dev, *clk_dev;
> - struct clk clk;
> - int ret;
> -
> - /* find the usb glue node */
> - node = fdt_node_offset_by_compatible(blob, -1,
> - "amlogic,meson-gxl-usb-ctrl");
> - if (node < 0) {
> - node = fdt_node_offset_by_compatible(blob, -1,
> - "amlogic,meson-gxm-usb-ctrl");
> - if (node < 0) {
> - debug("Not found usb-control node\n");
> - return -ENODEV;
> - }
> - }
> -
> - if (!fdtdec_get_is_enabled(blob, node)) {
> - debug("usb is disabled in the device tree\n");
> - return -ENODEV;
> - }
> -
> - ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
> - if (ret) {
> - debug("Not found usb-control device\n");
> - return ret;
> - }
> -
> - /* find the dwc2 node */
> - dwc2_node = fdt_node_offset_by_compatible(blob, node,
> - "amlogic,meson-g12a-usb");
> - if (dwc2_node < 0) {
> - debug("Not found dwc2 node\n");
> - return -ENODEV;
> - }
> -
> - if (!fdtdec_get_is_enabled(blob, dwc2_node)) {
> - debug("dwc2 is disabled in the device tree\n");
> - return -ENODEV;
> - }
> -
> - meson_gx_dwc2_data.regs_otg = fdtdec_get_addr(blob, dwc2_node, "reg");
> - if (meson_gx_dwc2_data.regs_otg == FDT_ADDR_T_NONE) {
> - debug("usbotg: can't get base address\n");
> - return -ENODATA;
> - }
> -
> - /* Enable clock */
> - ret = fdtdec_parse_phandle_with_args(blob, dwc2_node, "clocks",
> - "#clock-cells", 0, 0, &args);
> - if (ret) {
> - debug("usbotg has no clocks defined in the device tree\n");
> - return ret;
> - }
> -
> - ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &clk_dev);
> - if (ret)
> - return ret;
> -
> - if (args.args_count != 1) {
> - debug("Can't find clock ID in the device tree\n");
> - return -ENODATA;
> - }
> -
> - clk.dev = clk_dev;
> - clk.id = args.args[0];
> -
> - ret = clk_enable(&clk);
> - if (ret) {
> - debug("Failed to enable usbotg clock\n");
> - return ret;
> - }
> -
> - meson_gx_dwc2_data.rx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
> - "g-rx-fifo-size", 0);
> - meson_gx_dwc2_data.np_tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
> - "g-np-tx-fifo-size", 0);
> - meson_gx_dwc2_data.tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
> - "g-tx-fifo-size", 0);
> -
> - /* Switch to peripheral mode */
> - ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_PERIPHERAL);
> - if (ret)
> - return ret;
> -
> - return dwc2_udc_probe(&meson_gx_dwc2_data);
> -}
> -
> -int board_usb_cleanup(int index, enum usb_init_type init)
> -{
> - const void *blob = gd->fdt_blob;
> - struct udevice *dev;
> - int node;
> - int ret;
> -
> - /* find the usb glue node */
> - node = fdt_node_offset_by_compatible(blob, -1,
> - "amlogic,meson-gxl-usb-ctrl");
> - if (node < 0) {
> - node = fdt_node_offset_by_compatible(blob, -1,
> - "amlogic,meson-gxm-usb-ctrl");
> - if (node < 0) {
> - debug("Not found usb-control node\n");
> - return -ENODEV;
> - }
> - }
> -
> - if (!fdtdec_get_is_enabled(blob, node))
> - return -ENODEV;
> -
> - ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
> - if (ret)
> - return ret;
> -
> - /* Switch to OTG mode */
> - ret = dwc3_meson_gxl_force_mode(dev, USB_DR_MODE_HOST);
> - if (ret)
> - return ret;
> -
> - return 0;
> -}
> -#endif
> diff --git a/configs/jethub_j100_defconfig b/configs/jethub_j100_defconfig
> index c2651580f8..dac775bd3b 100644
> --- a/configs/jethub_j100_defconfig
> +++ b/configs/jethub_j100_defconfig
> @@ -55,6 +55,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_DEBUG_UART_SKIP_INIT=y
> CONFIG_MESON_SERIAL=y
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_DWC2=y
> diff --git a/configs/jethub_j80_defconfig b/configs/jethub_j80_defconfig
> index f3c47a001a..1d11a961b9 100644
> --- a/configs/jethub_j80_defconfig
> +++ b/configs/jethub_j80_defconfig
> @@ -59,6 +59,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_DEBUG_UART_SKIP_INIT=y
> CONFIG_MESON_SERIAL=y
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_DWC2=y
> diff --git a/configs/khadas-vim2_defconfig b/configs/khadas-vim2_defconfig
> index a8d11a83c9..3af6b446ec 100644
> --- a/configs/khadas-vim2_defconfig
> +++ b/configs/khadas-vim2_defconfig
> @@ -59,6 +59,7 @@ CONFIG_MESON_SPIFC=y
> CONFIG_SYSINFO=y
> CONFIG_SYSINFO_SMBIOS=y
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_DWC3=y
> diff --git a/configs/khadas-vim_defconfig b/configs/khadas-vim_defconfig
> index d1ed45ff88..6bb2200a6b 100644
> --- a/configs/khadas-vim_defconfig
> +++ b/configs/khadas-vim_defconfig
> @@ -50,6 +50,7 @@ CONFIG_MESON_SERIAL=y
> CONFIG_SYSINFO=y
> CONFIG_SYSINFO_SMBIOS=y
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_DWC3=y
> diff --git a/configs/libretech-ac_defconfig b/configs/libretech-ac_defconfig
> index a333106692..2f44771a84 100644
> --- a/configs/libretech-ac_defconfig
> +++ b/configs/libretech-ac_defconfig
> @@ -65,6 +65,7 @@ CONFIG_SPI=y
> CONFIG_DM_SPI=y
> CONFIG_MESON_SPIFC=y
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_DWC3=y
> diff --git a/configs/libretech-cc_defconfig b/configs/libretech-cc_defconfig
> index 60b40e6270..05311d8e08 100644
> --- a/configs/libretech-cc_defconfig
> +++ b/configs/libretech-cc_defconfig
> @@ -49,6 +49,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_DEBUG_UART_SKIP_INIT=y
> CONFIG_MESON_SERIAL=y
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_DWC3=y
> diff --git a/configs/libretech-s905d-pc_defconfig b/configs/libretech-s905d-pc_defconfig
> index d3e600ec02..4e3aee7542 100644
> --- a/configs/libretech-s905d-pc_defconfig
> +++ b/configs/libretech-s905d-pc_defconfig
> @@ -61,6 +61,7 @@ CONFIG_SPI=y
> CONFIG_DM_SPI=y
> CONFIG_MESON_SPIFC=y
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_DWC3=y
> diff --git a/configs/libretech-s912-pc_defconfig b/configs/libretech-s912-pc_defconfig
> index 8b4f052d08..c9ceb35ff6 100644
> --- a/configs/libretech-s912-pc_defconfig
> +++ b/configs/libretech-s912-pc_defconfig
> @@ -60,6 +60,7 @@ CONFIG_SPI=y
> CONFIG_DM_SPI=y
> CONFIG_MESON_SPIFC=y
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_DWC3=y
> diff --git a/configs/s400_defconfig b/configs/s400_defconfig
> index 827bd548c7..91930d7f48 100644
> --- a/configs/s400_defconfig
> +++ b/configs/s400_defconfig
> @@ -42,6 +42,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_DEBUG_UART_SKIP_INIT=y
> CONFIG_MESON_SERIAL=y
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_DWC3=y
> diff --git a/configs/wetek-core2_defconfig b/configs/wetek-core2_defconfig
> index 13940dd56f..b730700630 100644
> --- a/configs/wetek-core2_defconfig
> +++ b/configs/wetek-core2_defconfig
> @@ -51,6 +51,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_DEBUG_UART_SKIP_INIT=y
> CONFIG_MESON_SERIAL=y
> CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_DWC3=y
>
> --
> 2.34.1
More information about the U-Boot
mailing list