[PATCH v1] arm: dts: rockchip: sync rk3066/rk3188 DT files from linux-next v6.2-rc4

[John Keeping]

Hi Johan,

On Tue, Jan 17, 2023 at 03:44:07PM +0100, Johan Jonker wrote:
> On 1/17/23 10:46, Quentin Schulz wrote:
> > On 1/16/23 20:45, Johan Jonker wrote:
> >> Sync rk3066/rk3188 DT files from Linux.
> >> This is the state as of linux-next v6.2-rc4.
> >> New nfc node for MK808 rk3066a.
> >> CRU nodes now have a clock property.
> >> To prefend dtoc errors a fixed clock must also be
> >> included for tpl/spl in the rk3xxx-u-boot.dtsi file.
> >>
> >> Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
> >> ---
> 
> [..]
> 
> >> @@ -223,7 +224,7 @@
> >>           #size-cells = <1>;
> >>           ranges;
> >>
> >> -        gpio0: gpio0 at 2000a000 {
> >> +        gpio0: gpio at 2000a000 {
> >>               compatible = "rockchip,rk3188-gpio-bank0";
> >>               reg = <0x2000a000 0x100>;
> >>               interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> >> @@ -236,7 +237,7 @@
> >>               #interrupt-cells = <2>;
> >>           };
> >>
> >> -        gpio1: gpio1 at 2003c000 {
> 
> >> +        gpio1: gpio at 2003c000 {
> 
> Hi,
> 
> LOL: I made that binding change on request from Linux DT maintainers.
> Node names should generic.
> 
> ===
> 
> My full u-boot is able to boot a Linux kernel for rk3066a.
> Only when I give the command below it crashes:
> 
> gpio status -a
> 
> Could you confirm what other parts are effected?
> 
> If it's boots then it's good enough for me and move forward, so please merge.(Kever)
> 
> Driver fixes for u-boot depending on Linux DT changes is already very time consuming enough!

This reminded me of a patch that I never followed up with:

	https://lore.kernel.org/u-boot/20220726162509.1304234-1-john@metanate.com/

Can you test if that fixes `gpio status -a` for you?


John