[PATCH v3 2/3] drivers: timer: add timer driver for ARMv7 based Tegra devices
Simon Glass
sjg at chromium.org
Tue Jan 17 21:30:10 CET 2023
Hi Svyatoslav,
On Tue, 17 Jan 2023 at 09:53, Svyatoslav Ryhel <clamor95 at gmail.com> wrote:
>
> Add timer support for T20/T30/T114 and T124 based devices.
> Driver is based on DM, has device tree support and can be
> used on SPL and early boot stage.
>
> Tested-by: Andreas Westman Dorcsak <hedmoo at yahoo.com> # ASUS TF600T T30
> Tested-by: Jonas Schwöbel <jonasschwoebel at yahoo.de> # Surface RT T30
> Tested-by: Robert Eckelmann <longnoserob at gmail.com> # ASUS TF101 T20
> Tested-by: Svyatoslav Ryhel <clamor95 at gmail.com> # LG P895 T30
> Co-developed-by: Jonas Schwöbel <jonasschwoebel at yahoo.de>
> Signed-off-by: Jonas Schwöbel <jonasschwoebel at yahoo.de>
> Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
> ---
> drivers/timer/Kconfig | 8 +++
> drivers/timer/Makefile | 1 +
> drivers/timer/tegra-timer.c | 124 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 133 insertions(+)
> create mode 100644 drivers/timer/tegra-timer.c
>
> diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig
> index 6d6665005c..f32bd16227 100644
> --- a/drivers/timer/Kconfig
> +++ b/drivers/timer/Kconfig
> @@ -252,6 +252,14 @@ config STM32_TIMER
> Select this to enable support for the timer found on
> STM32 devices.
>
> +config TEGRA_TIMER
> + bool "Tegra timer support"
> + depends on TIMER
> + select TIMER_EARLY
> + help
> + Select this to enable support for the timer found on
> + Tegra devices.
> +
> config X86_TSC_TIMER
> bool "x86 Time-Stamp Counter (TSC) timer support"
> depends on TIMER && X86
> diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile
> index 6470fd5426..3c92113fc6 100644
> --- a/drivers/timer/Makefile
> +++ b/drivers/timer/Makefile
> @@ -27,6 +27,7 @@ obj-$(CONFIG_SP804_TIMER) += sp804_timer.o
> obj-$(CONFIG_$(SPL_)SIFIVE_CLINT) += sifive_clint_timer.o
> obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
> obj-$(CONFIG_STM32_TIMER) += stm32_timer.o
> +obj-$(CONFIG_TEGRA_TIMER) += tegra-timer.o
> obj-$(CONFIG_X86_TSC_TIMER) += tsc_timer.o
> obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
> obj-$(CONFIG_MCHP_PIT64B_TIMER) += mchp-pit64b-timer.o
> diff --git a/drivers/timer/tegra-timer.c b/drivers/timer/tegra-timer.c
> new file mode 100644
> index 0000000000..cda460921f
> --- /dev/null
> +++ b/drivers/timer/tegra-timer.c
> @@ -0,0 +1,124 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2022 Svyatoslav Ryhel <clamor95 at gmail.com>
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <timer.h>
> +
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/tegra.h>
> +
> +#define TEGRA_OSC_CLK_ENB_L_SET (NV_PA_CLK_RST_BASE + 0x320)
> +#define TEGRA_OSC_SET_CLK_ENB_TMR BIT(5)
> +
> +#define TEGRA_TIMER_USEC_CNTR (NV_PA_TMRUS_BASE + 0)
> +#define TEGRA_TIMER_USEC_CFG (NV_PA_TMRUS_BASE + 4)
> +
> +#define TEGRA_TIMER_RATE 1000000 /* 1 MHz */
> +
> +u64 notrace timer_early_get_count(void)
> +{
> + /* At this stage raw timer is used */
> + return readl(TEGRA_TIMER_USEC_CNTR);
> +}
> +
> +unsigned long notrace timer_early_get_rate(void)
> +{
> + return TEGRA_TIMER_RATE;
> +}
> +
> +#if CONFIG_IS_ENABLED(BOOTSTAGE)
You shouldn't need the #ifdef as the code will just be dropped by the
linker if not used.
> +ulong timer_get_boot_us(void)
> +{
> + u64 ticks = 0;
> + int ret;
> +
> + ret = dm_timer_init();
You can't call this here since tracing and bootstage won't work (they
need the timer before driver model starts) . You can check gd->timer
and use the early one or the driver model one.
> + if (!ret)
> + timer_get_count(gd->timer, &ticks);
> + else
> + ticks = timer_early_get_count();
> +
> + return ticks;
> +}
> +#endif
> +
> +static notrace u64 tegra_timer_get_count(struct udevice *dev)
> +{
> + u32 val = timer_early_get_count();
> + return timer_conv_64(val);
> +}
> +
[..]
Regards,
Simon
More information about the U-Boot
mailing list