[PATCH v2 14/17] riscv: dts: jh7110: Add initial StarFive JH7110 device tree
David Abdurachmanov
david.abdurachmanov at gmail.com
Thu Jan 19 07:18:58 CET 2023
On Wed, Jan 18, 2023 at 10:19 AM Yanhong Wang
<yanhong.wang at starfivetech.com> wrote:
>
> Add initial device tree for the JH7110 RISC-V SoC.
>
> Signed-off-by: Yanhong Wang <yanhong.wang at starfivetech.com>
> ---
> arch/riscv/dts/jh7110.dtsi | 497 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 497 insertions(+)
> create mode 100644 arch/riscv/dts/jh7110.dtsi
>
> diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi
> new file mode 100644
> index 0000000000..49d34b85af
> --- /dev/null
> +++ b/arch/riscv/dts/jh7110.dtsi
> @@ -0,0 +1,497 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + * Copyright (C) 2022 Emil Renner Berthing <kernel at esmil.dk>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/clock/starfive-jh7110.h>
> +#include <dt-bindings/reset/starfive-jh7110.h>
> +
> +/ {
> + compatible = "starfive,jh7110";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + S76_0: cpu at 0 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <0>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <8192>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <16384>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imacu";
> + tlb-split;
> + status = "disabled";
> +
> + cpu0_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_1: cpu at 1 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <1>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdcbsu";
> + tlb-split;
> +
> + cpu1_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_2: cpu at 2 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <2>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdcbsu";
> + tlb-split;
> +
> + cpu2_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_3: cpu at 3 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <3>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdcbsu";
> + tlb-split;
> +
> + cpu3_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_4: cpu at 4 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <4>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdcbsu";
Looking at SiFive U74 manuals, shouldn't this be RV64GC_Zba_Zbb_Sscofpmf?
U74 only supports Zba and Zbb bit manip extensions.
This is from the 21G3.02.00 release manual.
Looking more, S76 core is listed in the manual as supporting up to:
RV64IMAC_Zicsr_Zifencei_Zba_Zbb_Sscofpmf.
I almost forgot about _Zicsr_Zifencei (which are part of G). Shouldn't
those be listed too in riscv,isa?
david
> + tlb-split;
> +
> + cpu4_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&S76_0>;
> + };
> +
> + core1 {
> + cpu = <&U74_1>;
> + };
> +
> + core2 {
> + cpu = <&U74_2>;
> + };
> +
> + core3 {
> + cpu = <&U74_3>;
> + };
> +
> + core4 {
> + cpu = <&U74_4>;
> + };
> + };
> + };
> + };
> +
> + osc: osc {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + clk_rtc: clk_rtc {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + gmac0_rmii_refin: gmac0_rmii_refin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + gmac0_rgmii_rxin: gmac0_rgmii_rxin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + gmac1_rmii_refin: gmac1_rmii_refin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + gmac1_rgmii_rxin: gmac1_rgmii_rxin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + i2stx_bclk_ext: i2stx_bclk_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + i2stx_lrck_ext: i2stx_lrck_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + i2srx_bclk_ext: i2srx_bclk_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + i2srx_lrck_ext: i2srx_lrck_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + tdm_ext: tdm_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + mclk_ext: mclk_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&plic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clint: clint at 2000000 {
> + compatible = "starfive,jh7110-clint", "sifive,clint0";
> + reg = <0x0 0x2000000 0x0 0x10000>;
> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> + <&cpu1_intc 3>, <&cpu1_intc 7>,
> + <&cpu2_intc 3>, <&cpu2_intc 7>,
> + <&cpu3_intc 3>, <&cpu3_intc 7>,
> + <&cpu4_intc 3>, <&cpu4_intc 7>;
> + };
> +
> + plic: plic at c000000 {
> + compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
> + reg = <0x0 0xc000000 0x0 0x4000000>;
> + interrupts-extended = <&cpu0_intc 11>,
> + <&cpu1_intc 11>, <&cpu1_intc 9>,
> + <&cpu2_intc 11>, <&cpu2_intc 9>,
> + <&cpu3_intc 11>, <&cpu3_intc 9>,
> + <&cpu4_intc 11>, <&cpu4_intc 9>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + riscv,ndev = <136>;
> + };
> +
> + ccache: cache-controller at 2010000 {
> + compatible = "starfive,jh7110-ccache", "cache";
> + reg = <0x0 0x2010000 0x0 0x4000>;
> + interrupts = <1>, <3>, <4>, <2>;
> + cache-block-size = <64>;
> + cache-level = <2>;
> + cache-sets = <2048>;
> + cache-size = <2097152>;
> + cache-unified;
> + };
> +
> + syscrg: clock-controller at 13020000 {
> + compatible = "starfive,jh7110-syscrg";
> + reg = <0x0 0x13020000 0x0 0x10000>;
> + clocks = <&osc>, <&gmac1_rmii_refin>,
> + <&gmac1_rgmii_rxin>,
> + <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
> + <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
> + <&tdm_ext>, <&mclk_ext>;
> + clock-names = "osc", "gmac1_rmii_refin",
> + "gmac1_rgmii_rxin",
> + "i2stx_bclk_ext", "i2stx_lrck_ext",
> + "i2srx_bclk_ext", "i2srx_lrck_ext",
> + "tdm_ext", "mclk_ext";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + aoncrg: clock-controller at 17000000 {
> + compatible = "starfive,jh7110-aoncrg";
> + reg = <0x0 0x17000000 0x0 0x10000>;
> + clocks = <&osc>, <&clk_rtc>,
> + <&gmac0_rmii_refin>, <&gmac0_rgmii_rxin>,
> + <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
> + <&syscrg JH7110_SYSCLK_APB_BUS_FUNC>,
> + <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>;
> + clock-names = "osc", "clk_rtc", "gmac0_rmii_refin",
> + "gmac0_rgmii_rxin", "stg_axiahb",
> + "apb_bus_func", "gmac0_gtxclk";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + stgcrg: clock-controller at 10230000 {
> + compatible = "starfive,jh7110-stgcrg";
> + reg = <0x0 0x10230000 0x0 0x10000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + gpio: gpio at 13040000 {
> + compatible = "starfive,jh7110-sys-pinctrl";
> + reg = <0x0 0x13040000 0x0 0x10000>;
> + reg-names = "control";
> + clocks = <&syscrg JH7110_SYSCLK_IOMUX>;
> + resets = <&syscrg JH7110_SYSRST_IOMUX>;
> + interrupts = <86>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpioa: gpio at 17020000 {
> + compatible = "starfive,jh7110-aon-pinctrl";
> + reg = <0x0 0x17020000 0x0 0x10000>;
> + reg-names = "control";
> + resets = <&aoncrg JH7110_AONRST_AON_IOMUX>;
> + interrupts = <85>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + uart0: serial at 10000000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10000000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
> + <&syscrg JH7110_SYSCLK_UART0_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART0_APB>,
> + <&syscrg JH7110_SYSRST_UART0_CORE>;
> + interrupts = <32>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart1: serial at 10010000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10010000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
> + <&syscrg JH7110_SYSCLK_UART1_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART1_APB>,
> + <&syscrg JH7110_SYSRST_UART1_CORE>;
> + interrupts = <33>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart2: serial at 10020000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10020000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
> + <&syscrg JH7110_SYSCLK_UART2_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART2_APB>,
> + <&syscrg JH7110_SYSRST_UART2_CORE>;
> + interrupts = <34>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart3: serial at 12000000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x12000000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
> + <&syscrg JH7110_SYSCLK_UART3_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART3_APB>,
> + <&syscrg JH7110_SYSRST_UART3_CORE>;
> + interrupts = <45>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart4: serial at 12010000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x12010000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
> + <&syscrg JH7110_SYSCLK_UART4_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART4_APB>,
> + <&syscrg JH7110_SYSRST_UART4_CORE>;
> + interrupts = <46>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart5: serial at 12020000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x12020000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
> + <&syscrg JH7110_SYSCLK_UART5_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART5_APB>,
> + <&syscrg JH7110_SYSRST_UART5_CORE>;
> + interrupts = <47>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + sdio0: mmc at 16010000 {
> + compatible = "snps,dw-mshc";
> + reg = <0x0 0x16010000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_SDIO0_AHB>,
> + <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
> + clock-names = "biu", "ciu";
> + resets = <&syscrg JH7110_SYSRST_SDIO0_AHB>;
> + reset-names = "reset";
> + interrupts = <74>;
> + data-addr = <0>;
> + fifo-depth = <32>;
> + fifo-watermark-aligned;
> + status = "disabled";
> + };
> +
> + sdio1: mmc at 16020000 {
> + compatible = "snps,dw-mshc";
> + reg = <0x0 0x16020000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_SDIO1_AHB>,
> + <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
> + clock-names = "biu", "ciu";
> + resets = <&syscrg JH7110_SYSRST_SDIO1_AHB>;
> + reset-names = "reset";
> + interrupts = <75>;
> + data-addr = <0>;
> + fifo-depth = <32>;
> + fifo-watermark-aligned;
> + status = "disabled";
> + };
> +
> + qspi: spi at 13010000 {
> + compatible = "cdns,qspi-nor";
> + reg = <0x0 0x13010000 0x0 0x10000
> + 0x0 0x21000000 0x0 0x400000>;
> + clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>;
> + clock-names = "clk_ref";
> + resets = <&syscrg JH7110_SYSRST_QSPI_APB>,
> + <&syscrg JH7110_SYSRST_QSPI_AHB>,
> + <&syscrg JH7110_SYSRST_QSPI_REF>;
> + resets-names = "rst_apb", "rst_ahb", "rst_ref";
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +};
> --
> 2.17.1
>
More information about the U-Boot
mailing list