[PATCH 04/11] driver: cache: cache-v5l2: Update memory-mapped scheme to support Gen2 platform

[Yu Chien Peter Lin]

The L2C configuration register has MAP field to indicate its version
is v0 (Gen1) or v1 (Gen2) L2-cache. This patch makes the driver
compatible with both memory-mapped scheme.

Signed-off-by: Yu Chien Peter Lin <peterlin at andestech.com>
---
 drivers/cache/cache-v5l2.c | 32 ++++++++++++++++++++++++--------
 1 file changed, 24 insertions(+), 8 deletions(-)

diff --git a/drivers/cache/cache-v5l2.c b/drivers/cache/cache-v5l2.c
index bbdb76bd57..e782430c57 100644
--- a/drivers/cache/cache-v5l2.c
+++ b/drivers/cache/cache-v5l2.c
@@ -34,6 +34,14 @@ struct l2cache {
 	volatile u64	cctl_status;
 };
 
+/* Configuration register */
+#define MEM_MAP_OFF	20
+#define MEM_MAP_MSK	BIT(MEM_MAP_OFF)
+/* offset of v0 memory map (Gen1) */
+static u32 cmd_stride = 0x10;
+static u32 status_stride = 0x0;
+static u32 status_bit_offset = 0x4;
+
 /* Control Register */
 #define L2_ENABLE	0x1
 /* prefetch */
@@ -53,14 +61,15 @@ struct l2cache {
 #define DRAMICTL_MSK	BIT(DRAMICTL_OFF)
 
 /* CCTL Command Register */
-#define CCTL_CMD_REG(base, hart)	((ulong)(base) + 0x40 + (hart) * 0x10)
+#define CCTL_CMD_REG(base, hart)	((ulong)(base) + 0x40 + (hart) * (cmd_stride))
 #define L2_WBINVAL_ALL	0x12
 
 /* CCTL Status Register */
-#define CCTL_STATUS_MSK(hart)		(0xf << ((hart) * 4))
-#define CCTL_STATUS_IDLE(hart)		(0 << ((hart) * 4))
-#define CCTL_STATUS_PROCESS(hart)	(1 << ((hart) * 4))
-#define CCTL_STATUS_ILLEGAL(hart)	(2 << ((hart) * 4))
+#define CCTL_STATUS_REG(base, hart)	((ulong)(base) + 0x80 + (hart) * (status_stride))
+#define CCTL_STATUS_MSK(hart)		(0xf << ((hart) * (status_bit_offset)))
+#define CCTL_STATUS_IDLE(hart)		(0 << ((hart) * (status_bit_offset)))
+#define CCTL_STATUS_PROCESS(hart)	(1 << ((hart) * (status_bit_offset)))
+#define CCTL_STATUS_ILLEGAL(hart)	(2 << ((hart) * (status_bit_offset)))
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -133,12 +142,19 @@ static int v5l2_probe(struct udevice *dev)
 {
 	struct v5l2_plat *plat = dev_get_plat(dev);
 	struct l2cache *regs = plat->regs;
-	u32 ctl_val;
+	u32 cfg_val, ctl_val;
 
+	cfg_val = readl(&regs->configure);
 	ctl_val = readl(&regs->control);
 
-	if (!(ctl_val & L2_ENABLE))
-		ctl_val |= L2_ENABLE;
+	/* If true, v1 memory map (Gen2) */
+	if (cfg_val & MEM_MAP_MSK) {
+		cmd_stride = 0x1000;
+		status_stride = 0x1000;
+		status_bit_offset = 0x0;
+	}
+
+	ctl_val |= L2_ENABLE;
 
 	if (plat->iprefetch != -EINVAL) {
 		ctl_val &= ~(IPREPETCH_MSK);
-- 
2.34.1