[PATCH 2/2] ARM: meson: add support for Odroid Go Ultra
Neil Armstrong
neil.armstrong at linaro.org
Thu Jan 19 14:44:18 CET 2023
This adds initial support for the Hardkernel Odroid Go Ultra.
The Odroid Go Ultra is a portable gaming device with the following
characteristics:
- Amlogic S922X SoC
- RK817 & RK818 PMICs
- 2GiB LPDDR4
- On board 16GiB eMMC
- Micro SD Card slot
- 5inch 854×480 MIPI-DSI TFT LCD
- Earphone stereo jack, 0.5Watt 8Ω Mono speaker
- Li-Polymer 3.7V/4000mAh Battery
- USB-A 2.0 Host Connector
- x16 GPIO Input Buttons
- 2x ADC Analog Joysticks
- USB-C Port for USB2 Device and Charging
The following are not yet handled:
- Battery RK818 Gauge and Charging
- 5inch 854×480 MIPI-DSI TFT LCD
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
.../arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi | 16 +++++
configs/odroid-go-ultra_defconfig | 70 ++++++++++++++++++++++
doc/board/amlogic/index.rst | 4 +-
doc/board/amlogic/odroid-go-ultra.rst | 34 +++++++++++
4 files changed, 123 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi b/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi
new file mode 100644
index 0000000000..00852f5e54
--- /dev/null
+++ b/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong at linaro.org>
+ */
+
+#include "meson-g12-common-u-boot.dtsi"
+
+/* RK817/818 BOOST regulator aren't supported yet, so remove phandles from PHY nodes */
+
+&usb2_phy1 {
+ /delete-property/ phy-supply;
+};
+
+&usb3_pcie_phy {
+ /delete-property/ phy-supply;
+};
diff --git a/configs/odroid-go-ultra_defconfig b/configs/odroid-go-ultra_defconfig
new file mode 100644
index 0000000000..a4d349fba4
--- /dev/null
+++ b/configs/odroid-go-ultra_defconfig
@@ -0,0 +1,70 @@
+CONFIG_ARM=y
+CONFIG_SYS_BOARD="w400"
+CONFIG_ARCH_MESON=y
+CONFIG_TEXT_BASE=0x01000000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x2000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-odroid-go-ultra"
+CONFIG_MESON_G12A=y
+CONFIG_DEBUG_UART_BASE=0xff803000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_IDENT_STRING=" odroid-go-ultra"
+CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_DEBUG_UART=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
+CONFIG_REMAKE_ELF=y
+CONFIG_OF_BOARD_SETUP=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_MISC_INIT_R=y
+CONFIG_SYS_MAXARGS=32
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+CONFIG_OF_CONTROL=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ADC=y
+CONFIG_SARADC_MESON=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_ADC=y
+CONFIG_BUTTON_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MESON=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_MESON_G12A_USB_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MESON_G12A=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MESON_EE_POWER_DOMAIN=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RESET=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_MESON_SERIAL=y
+CONFIG_SYSINFO=y
+CONFIG_SYSINFO_SMBIOS=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_MESON_G12A=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index 4d407f9362..11443d9f2c 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -19,7 +19,8 @@ This matrix concerns the actual source code version.
| | Nanopi-K2 | Khadas-VIM | Libretech-PC | JetHub J100 | SEI510 | Khadas-VIM3 | Khadas-VIM3L |
| | P200 | LibreTech-CC v1 | WeTek Core2 | | Radxa Zero | GT-King/Pro | Odroid-C4 |
| | P201 | LibreTech-AC v2 | | | | GSKing-X | Odroid-HC4 |
-| | | JetHub J80 | | | | | BananaPi-M5 |
+| | | JetHub J80 | | | | Odroid-Go- | BananaPi-M5 |
+| | | | | | | Ultra | |
+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
@@ -105,6 +106,7 @@ Board Documentation
odroid-c2
odroid-c4
odroid-n2
+ odroid-go-ultra
p200
p201
p212
diff --git a/doc/board/amlogic/odroid-go-ultra.rst b/doc/board/amlogic/odroid-go-ultra.rst
new file mode 100644
index 0000000000..8df9e0cb79
--- /dev/null
+++ b/doc/board/amlogic/odroid-go-ultra.rst
@@ -0,0 +1,34 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for ODROID-GO-ULTRA
+==========================
+
+The Odroid Go Ultra is a portable gaming device with the following
+characteristics:
+
+ - Amlogic S922X SoC
+ - RK817 & RK818 PMICs
+ - 2GiB LPDDR4
+ - On board 16GiB eMMC
+ - Micro SD Card slot
+ - 5inch 854×480 MIPI-DSI TFT LCD
+ - Earphone stereo jack, 0.5Watt 8Ω Mono speaker
+ - Li-Polymer 3.7V/4000mAh Battery
+ - USB-A 2.0 Host Connector
+ - x16 GPIO Input Buttons
+ - 2x ADC Analog Joysticks
+ - USB-C Port for USB2 Device and Charging
+
+U-Boot compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make odroid-go-ultra_defconfig
+ $ make
+
+Image creation
+--------------
+
+Pleaser refer to :doc:`pre-generated-fip` with codename `odroid-go-ultra`
--
2.34.1
More information about the U-Boot
mailing list