[PATCH 5/8] usb: dwc3: Add dwc3 glue for am62

[Sjoerd Simons]

Add glue code for TI AM62 to the dwc3 driver; Most code adopted from
TI vendor u-boot code.

Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>
---

 drivers/usb/dwc3/dwc3-generic.c | 102 ++++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
index 78966718d01..cab7b2e928d 100644
--- a/drivers/usb/dwc3/dwc3-generic.c
+++ b/drivers/usb/dwc3/dwc3-generic.c
@@ -11,6 +11,7 @@
 #include <cpu_func.h>
 #include <log.h>
 #include <dm.h>
+#include <dm/device_compat.h>
 #include <dm/device-internal.h>
 #include <dm/lists.h>
 #include <dwc3-uboot.h>
@@ -23,7 +24,9 @@
 #include <usb.h>
 #include "core.h"
 #include "gadget.h"
+#include <regmap.h>
 #include <reset.h>
+#include <syscon.h>
 #include <clk.h>
 #include <usb/xhci.h>
 #include <asm/gpio.h>
@@ -398,6 +401,104 @@ struct dwc3_glue_ops ti_ops = {
 	.glue_configure = dwc3_ti_glue_configure,
 };
 
+void dwc3_ti_am62_glue_configure(struct udevice *dev, int index,
+				 enum usb_dr_mode mode)
+{
+#define USBSS_MODE_CONTROL		0x1c
+#define USBSS_PHY_CONFIG		0x8
+#define USBSS_PHY_VBUS_SEL_MASK		GENMASK(2, 1)
+#define USBSS_PHY_VBUS_SEL_SHIFT	1
+#define USBSS_MODE_VALID	BIT(0)
+#define PHY_PLL_REFCLK_MASK	GENMASK(3, 0)
+static const int dwc3_ti_am62_rate_table[] = {	/* in KHZ */
+	9600,
+	10000,
+	12000,
+	19200,
+	20000,
+	24000,
+	25000,
+	26000,
+	38400,
+	40000,
+	58000,
+	50000,
+	52000,
+};
+
+	struct clk usb2_refclk;
+	int rate_code, i, ret;
+	unsigned long rate;
+	u32 reg;
+	void *usbss;
+	bool vbus_divider;
+	struct regmap *syscon;
+	struct ofnode_phandle_args args;
+
+	usbss = dev_remap_addr_index(dev, 0);
+	if (IS_ERR(usbss)) {
+		dev_err(dev, "can't map IOMEM resource\n");
+		return;
+	}
+
+	ret = clk_get_by_name(dev, "ref", &usb2_refclk);
+	if (ret) {
+		dev_err(dev, "can't get usb2_refclk\n");
+		return;
+	}
+
+	/* Calcuate the rate code */
+	rate = clk_get_rate(&usb2_refclk);
+	rate /= 1000;	/* To KHz */
+	for (i = 0; i < ARRAY_SIZE(dwc3_ti_am62_rate_table); i++) {
+		if (dwc3_ti_am62_rate_table[i] == rate)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(dwc3_ti_am62_rate_table)) {
+		dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
+		return;
+	}
+
+	rate_code = i;
+
+	/* Read the syscon property */
+	syscon = syscon_regmap_lookup_by_phandle(dev, "ti,syscon-phy-pll-refclk");
+	if (IS_ERR(syscon)) {
+		dev_err(dev, "unable to get ti,syscon-phy-pll-refclk regmap\n");
+		return;
+	}
+
+	ret = ofnode_parse_phandle_with_args(dev_ofnode(dev), "ti,syscon-phy-pll-refclk", NULL, 1,
+					     0, &args);
+	if (ret)
+		return;
+
+	/* Program PHY PLL refclk by reading syscon property */
+	ret = regmap_update_bits(syscon, args.args[0], PHY_PLL_REFCLK_MASK, rate_code);
+	if (ret) {
+		dev_err(dev, "failed to set phy pll reference clock rate\n");
+		return;
+	}
+
+	/* VBUS divider select */
+	reg = readl(usbss + USBSS_PHY_CONFIG);
+	vbus_divider = dev_read_bool(dev, "ti,vbus-divider");
+	if (vbus_divider)
+		reg |= 1 << USBSS_PHY_VBUS_SEL_SHIFT;
+
+	writel(reg, usbss + USBSS_PHY_CONFIG);
+
+	/* Set mode valid */
+	reg = readl(usbss + USBSS_MODE_CONTROL);
+	reg |= USBSS_MODE_VALID;
+	writel(reg, usbss + USBSS_MODE_CONTROL);
+}
+
+struct dwc3_glue_ops ti_am62_ops = {
+	.glue_configure = dwc3_ti_am62_glue_configure,
+};
+
 static int dwc3_glue_bind(struct udevice *parent)
 {
 	ofnode node;
@@ -570,6 +671,7 @@ static const struct udevice_id dwc3_glue_ids[] = {
 	{ .compatible = "ti,keystone-dwc3"},
 	{ .compatible = "ti,dwc3", .data = (ulong)&ti_ops },
 	{ .compatible = "ti,am437x-dwc3", .data = (ulong)&ti_ops },
+	{ .compatible = "ti,am62-usb", .data = (ulong)&ti_am62_ops },
 	{ .compatible = "ti,am654-dwc3" },
 	{ .compatible = "rockchip,rk3328-dwc3" },
 	{ .compatible = "rockchip,rk3399-dwc3" },
-- 
2.39.0