[PATCH v3 5/6] binman: Add support for selecting firmware to use with split-elf
Jonas Karlman
jonas at kwiboo.se
Sat Jan 21 20:02:12 CET 2023
In some cases it is desired for SPL to start TF-A instead of U-Boot
proper. Add support for a new property fit,firmware that picks a
valid entry and prepends the remaining valid entries to the
loadables list generated by the split-elf generator.
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
v3:
- Introduce new fit,firmware property to handle firmware selection
v2:
- New patch
tools/binman/entries.rst | 16 +++-
tools/binman/etype/fit.py | 62 ++++++++++--
tools/binman/ftest.py | 44 +++++++++
.../test/276_fit_firmware_loadables.dts | 96 +++++++++++++++++++
4 files changed, 205 insertions(+), 13 deletions(-)
create mode 100644 tools/binman/test/276_fit_firmware_loadables.dts
diff --git a/tools/binman/entries.rst b/tools/binman/entries.rst
index 78f95dae1a4e..7a04a613992d 100644
--- a/tools/binman/entries.rst
+++ b/tools/binman/entries.rst
@@ -721,6 +721,12 @@ split-elf
fit,data
Generates a `data = <...>` property with the contents of the segment
+ fit,firmware
+ Generates a `firmware = <...>` property. Provides a list of possible
+ nodes to be used as the `firmware` property value. The first valid
+ node is picked as the firmware. Any remaining valid nodes is
+ prepended to the `loadable` property generated by `fit,loadables`
+
fit,loadables
Generates a `loadable = <...>` property with a list of the generated
nodes (including all nodes if this operation is used multiple times)
@@ -791,7 +797,7 @@ Here is an example showing ATF, TEE and a device tree all combined::
@config-SEQ {
description = "conf-NAME.dtb";
fdt = "fdt-SEQ";
- firmware = "u-boot";
+ fit,firmware = "atf-1", "u-boot";
fit,loadables;
};
};
@@ -846,15 +852,15 @@ is::
configurations {
default = "config-1";
config-1 {
- loadables = "atf-1", "atf-2", "atf-3", "tee-1", "tee-2";
+ loadables = "u-boot", "atf-2", "atf-3", "tee-1", "tee-2";
description = "rk3399-firefly.dtb";
fdt = "fdt-1";
- firmware = "u-boot";
+ firmware = "atf-1";
};
};
-U-Boot SPL can then load the firmware (U-Boot proper) and all the loadables
-(ATF and TEE), then proceed with the boot.
+U-Boot SPL can then load the firmware (ATF) and all the loadables (U-Boot
+proper, ATF and TEE), then proceed with the boot.
diff --git a/tools/binman/etype/fit.py b/tools/binman/etype/fit.py
index bcb606f3f94c..cd2943533ce2 100644
--- a/tools/binman/etype/fit.py
+++ b/tools/binman/etype/fit.py
@@ -187,6 +187,12 @@ class Entry_fit(Entry_section):
fit,data
Generates a `data = <...>` property with the contents of the segment
+ fit,firmware
+ Generates a `firmware = <...>` property. Provides a list of possible
+ nodes to be used as the `firmware` property value. The first valid
+ node is picked as the firmware. Any remaining valid nodes is
+ prepended to the `loadable` property generated by `fit,loadables`
+
fit,loadables
Generates a `loadable = <...>` property with a list of the generated
nodes (including all nodes if this operation is used multiple times)
@@ -257,7 +263,7 @@ class Entry_fit(Entry_section):
@config-SEQ {
description = "conf-NAME.dtb";
fdt = "fdt-SEQ";
- firmware = "u-boot";
+ fit,firmware = "atf-1", "u-boot";
fit,loadables;
};
};
@@ -312,15 +318,15 @@ class Entry_fit(Entry_section):
configurations {
default = "config-1";
config-1 {
- loadables = "atf-1", "atf-2", "atf-3", "tee-1", "tee-2";
+ loadables = "u-boot", "atf-2", "atf-3", "tee-1", "tee-2";
description = "rk3399-firefly.dtb";
fdt = "fdt-1";
- firmware = "u-boot";
+ firmware = "atf-1";
};
};
- U-Boot SPL can then load the firmware (U-Boot proper) and all the loadables
- (ATF and TEE), then proceed with the boot.
+ U-Boot SPL can then load the firmware (ATF) and all the loadables (U-Boot
+ proper, ATF and TEE), then proceed with the boot.
"""
def __init__(self, section, etype, node):
"""
@@ -510,6 +516,42 @@ class Entry_fit(Entry_section):
return
fsw.property(pname, prop.bytes)
+ def _process_firmware_prop(node):
+ """Process optional fit,firmware property
+
+ Picks the first valid entry for use as the firmware, remaining valid
+ entries is prepended to loadables
+
+ Args:
+ node (Node): Generator node to process
+
+ Returns:
+ firmware (str): Firmware or None
+ result (list): List of remaining loadables
+ """
+ val = fdt_util.GetStringList(node, 'fit,firmware')
+ if val is None:
+ return None, self._loadables
+ valid_entries = list(self._loadables)
+ for name, entry in self.GetEntries().items():
+ missing = []
+ entry.CheckMissing(missing)
+ entry.CheckOptional(missing)
+ if not missing:
+ valid_entries.append(name)
+ firmware = None
+ result = []
+ for name in val:
+ if name in valid_entries:
+ if not firmware:
+ firmware = name
+ elif name not in result:
+ result.append(name)
+ for name in self._loadables:
+ if name != firmware and name not in result:
+ result.append(name)
+ return firmware, result
+
def _gen_fdt_nodes(base_node, node, depth, in_images):
"""Generate FDT nodes
@@ -520,20 +562,24 @@ class Entry_fit(Entry_section):
first.
Args:
- node (None): Generator node to process
+ node (Node): Generator node to process
depth: Current node depth (0 is the base 'fit' node)
in_images: True if this is inside the 'images' node, so that
'data' properties should be generated
"""
if self._fdts:
+ firmware, fit_loadables = _process_firmware_prop(node)
# Generate nodes for each FDT
for seq, fdt_fname in enumerate(self._fdts):
node_name = node.name[1:].replace('SEQ', str(seq + 1))
fname = tools.get_input_filename(fdt_fname + '.dtb')
with fsw.add_node(node_name):
for pname, prop in node.props.items():
- if pname == 'fit,loadables':
- val = '\0'.join(self._loadables) + '\0'
+ if pname == 'fit,firmware':
+ if firmware:
+ fsw.property_string('firmware', firmware)
+ elif pname == 'fit,loadables':
+ val = '\0'.join(fit_loadables) + '\0'
fsw.property('loadables', val.encode('utf-8'))
elif pname == 'fit,operation':
pass
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index cd2757257178..0c4d34dfe480 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -6337,6 +6337,50 @@ fdt fdtmap Extract the devicetree blob from the fdtmap
}
self.assertEqual(expected, props)
+ def testFitFirmwareLoadables(self):
+ """Test an image with an FIT that use fit,firmware"""
+ if not elf.ELF_TOOLS:
+ self.skipTest('Python elftools not available')
+ entry_args = {
+ 'of-list': 'test-fdt1',
+ 'default-dt': 'test-fdt1',
+ 'atf-bl31-path': 'bl31.elf',
+ 'tee-os-path': 'missing.bin',
+ }
+ test_subdir = os.path.join(self._indir, TEST_FDT_SUBDIR)
+ data = self._DoReadFileDtb(
+ '276_fit_firmware_loadables.dts',
+ entry_args=entry_args,
+ extra_indirs=[test_subdir])[0]
+
+ dtb = fdt.Fdt.FromData(data)
+ dtb.Scan()
+
+ node = dtb.GetNode('/configurations/conf-uboot-1')
+ self.assertEqual('u-boot', node.props['firmware'].value)
+ self.assertEqual(['atf-1', 'atf-2'],
+ fdt_util.GetStringList(node, 'loadables'))
+
+ node = dtb.GetNode('/configurations/conf-atf-1')
+ self.assertEqual('atf-1', node.props['firmware'].value)
+ self.assertEqual(['u-boot', 'atf-2'],
+ fdt_util.GetStringList(node, 'loadables'))
+
+ node = dtb.GetNode('/configurations/conf-missing-uboot-1')
+ self.assertEqual('u-boot', node.props['firmware'].value)
+ self.assertEqual(['atf-1', 'atf-2'],
+ fdt_util.GetStringList(node, 'loadables'))
+
+ node = dtb.GetNode('/configurations/conf-missing-atf-1')
+ self.assertEqual('atf-1', node.props['firmware'].value)
+ self.assertEqual(['u-boot', 'atf-2'],
+ fdt_util.GetStringList(node, 'loadables'))
+
+ node = dtb.GetNode('/configurations/conf-missing-tee-1')
+ self.assertEqual('atf-1', node.props['firmware'].value)
+ self.assertEqual(['u-boot', 'atf-2'],
+ fdt_util.GetStringList(node, 'loadables'))
+
if __name__ == "__main__":
unittest.main()
diff --git a/tools/binman/test/276_fit_firmware_loadables.dts b/tools/binman/test/276_fit_firmware_loadables.dts
new file mode 100644
index 000000000000..4428e6a7e8e8
--- /dev/null
+++ b/tools/binman/test/276_fit_firmware_loadables.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ fit {
+ description = "test desc";
+ #address-cells = <1>;
+ fit,fdt-list = "of-list";
+
+ images {
+ u-boot {
+ description = "test u-boot";
+ type = "standalone";
+ arch = "arm64";
+ os = "u-boot";
+ compression = "none";
+ load = <0x00000000>;
+ entry = <0x00000000>;
+
+ u-boot-nodtb {
+ };
+ };
+ tee {
+ description = "test tee";
+ type = "tee";
+ arch = "arm64";
+ os = "tee";
+ compression = "none";
+ load = <0x00200000>;
+
+ tee-os {
+ optional;
+ };
+ };
+ @atf-SEQ {
+ fit,operation = "split-elf";
+ description = "test tf-a";
+ type = "firmware";
+ arch = "arm64";
+ os = "arm-trusted-firmware";
+ compression = "none";
+ fit,load;
+ fit,entry;
+ fit,data;
+
+ atf-bl31 {
+ };
+ };
+ @fdt-SEQ {
+ description = "test fdt";
+ type = "flat_dt";
+ compression = "none";
+ };
+ };
+
+ configurations {
+ default = "@conf-uboot-DEFAULT-SEQ";
+ @conf-uboot-SEQ {
+ description = "uboot config";
+ fdt = "fdt-SEQ";
+ fit,firmware = "u-boot";
+ fit,loadables;
+ };
+ @conf-atf-SEQ {
+ description = "atf config";
+ fdt = "fdt-SEQ";
+ fit,firmware = "atf-1", "u-boot";
+ fit,loadables;
+ };
+ @conf-missing-uboot-SEQ {
+ description = "missing uboot config";
+ fdt = "fdt-SEQ";
+ fit,firmware = "missing-1", "u-boot";
+ fit,loadables;
+ };
+ @conf-missing-atf-SEQ {
+ description = "missing atf config";
+ fdt = "fdt-SEQ";
+ fit,firmware = "missing-1", "atf-1", "u-boot";
+ fit,loadables;
+ };
+ @conf-missing-tee-SEQ {
+ description = "missing tee config";
+ fdt = "fdt-SEQ";
+ fit,firmware = "atf-1", "u-boot", "tee";
+ fit,loadables;
+ };
+ };
+ };
+ };
+};
--
2.39.1
More information about the U-Boot
mailing list