[PATCH 18/41] imx9: allow to bootaux Mcore with input address

[Peng Fan (OSS)]

From: Ye Li <ye.li at nxp.com>

Currently bootaux only supports to boot M33 core from TCM. Since ATF
has changed to use x2 parameter for M33 image address, update the
bootaux command to use input address, so we can support boot from
any possilbe address like TCM, DDR, Flexspi NOR.

Reviewed-by: Peng Fan <peng.fan at nxp.com>
Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/mach-imx/imx9/imx_bootaux.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-imx/imx9/imx_bootaux.c b/arch/arm/mach-imx/imx9/imx_bootaux.c
index 3b6662aeb81..256e6fa1c54 100644
--- a/arch/arm/mach-imx/imx9/imx_bootaux.c
+++ b/arch/arm/mach-imx/imx9/imx_bootaux.c
@@ -34,17 +34,13 @@ int arch_auxiliary_core_down(u32 core_id)
 int arch_auxiliary_core_up(u32 core_id, ulong addr)
 {
 	struct arm_smccc_res res;
-	u32 stack, pc;
 
 	if (!addr)
 		return -EINVAL;
 
-	stack = *(u32 *)addr;
-	pc = *(u32 *)(addr + 4);
+	printf("## Starting auxiliary core addr = 0x%08lX...\n", addr);
 
-	printf("## Starting auxiliary core stack = 0x%08X, pc = 0x%08X...\n", stack, pc);
-
-	arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, 0, 0,
+	arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, addr, 0,
 		      0, 0, 0, 0, &res);
 
 	return 0;
@@ -129,5 +125,5 @@ U_BOOT_CMD(
 	"Start auxiliary core",
 	"<address> [<core>]\n"
 	"   - start auxiliary core [<core>] (default 0),\n"
-	"     at address <address>\n"
+	"     at address <address> of auxiliary core view\n"
 );
-- 
2.36.0