[PATCH 68/88] arm: Rename STM32MP13x
Simon Glass
sjg at chromium.org
Mon Jan 23 23:00:11 CET 2023
CONFIG options must not use lower-case letter. Convert this and related
ones to upper case.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/arm/dts/Makefile | 2 +-
arch/arm/mach-stm32mp/Kconfig | 4 ++--
arch/arm/mach-stm32mp/Kconfig.13x | 4 ++--
arch/arm/mach-stm32mp/Makefile | 2 +-
arch/arm/mach-stm32mp/cmd_stm32key.c | 10 +++++-----
arch/arm/mach-stm32mp/fdt.c | 4 ++--
arch/arm/mach-stm32mp/include/mach/stm32.h | 6 +++---
board/st/common/Kconfig | 2 +-
board/st/stm32mp1/Kconfig | 2 +-
configs/stm32mp13_defconfig | 4 ++--
drivers/clk/stm32/Kconfig | 2 +-
11 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c184c802b45..dc8dcdff218 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1215,7 +1215,7 @@ dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
-dtb-$(CONFIG_STM32MP13x) += \
+dtb-$(CONFIG_STM32MP13X) += \
stm32mp135f-dk.dtb
dtb-$(CONFIG_STM32MP15x) += \
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index db47baba6d1..cf3196b3b3a 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -37,7 +37,7 @@ choice
prompt "Select STMicroelectronics STM32MPxxx Soc"
default STM32MP15x
-config STM32MP13x
+config STM32MP13X
bool "Support STMicroelectronics STM32MP13x Soc"
select ARM_SMCCC
select CPU_V7A
@@ -103,7 +103,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
config STM32_ETZPC
bool "STM32 Extended TrustZone Protection"
- depends on STM32MP15x || STM32MP13x
+ depends on STM32MP15x || STM32MP13X
default y
imply BOOTP_SERVERIP
help
diff --git a/arch/arm/mach-stm32mp/Kconfig.13x b/arch/arm/mach-stm32mp/Kconfig.13x
index acc02a5a187..4d74b35055b 100644
--- a/arch/arm/mach-stm32mp/Kconfig.13x
+++ b/arch/arm/mach-stm32mp/Kconfig.13x
@@ -1,10 +1,10 @@
-if STM32MP13x
+if STM32MP13X
choice
prompt "STM32MP13x board select"
optional
-config TARGET_ST_STM32MP13x
+config TARGET_ST_STM32MP13X
bool "STMicroelectronics STM32MP13x boards"
imply BOOTSTAGE
imply CMD_BOOTSTAGE
diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
index a19b2797c8b..90c7c121ec4 100644
--- a/arch/arm/mach-stm32mp/Makefile
+++ b/arch/arm/mach-stm32mp/Makefile
@@ -8,7 +8,7 @@ obj-y += dram_init.o
obj-y += syscon.o
obj-y += bsec.o
-obj-$(CONFIG_STM32MP13x) += stm32mp13x.o
+obj-$(CONFIG_STM32MP13X) += stm32mp13x.o
obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o
diff --git a/arch/arm/mach-stm32mp/cmd_stm32key.c b/arch/arm/mach-stm32mp/cmd_stm32key.c
index 85be8e23bdb..96407cd9b18 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32key.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32key.c
@@ -18,7 +18,7 @@
* STM32MP13x: 0b111111 = 0x3F for OTP_SECURED closed device
*/
#define STM32_OTP_CLOSE_ID 0
-#define STM32_OTP_STM32MP13x_CLOSE_MASK 0x3F
+#define STM32_OTP_STM32MP13X_CLOSE_MASK 0x3F
#define STM32_OTP_STM32MP15x_CLOSE_MASK BIT(6)
/* PKH is the first element of the key list */
@@ -60,7 +60,7 @@ static u8 stm32key_index;
static u8 get_key_nb(void)
{
- if (IS_ENABLED(CONFIG_STM32MP13x))
+ if (IS_ENABLED(CONFIG_STM32MP13X))
return ARRAY_SIZE(stm32mp13_list);
if (IS_ENABLED(CONFIG_STM32MP15x))
@@ -69,7 +69,7 @@ static u8 get_key_nb(void)
static const struct stm32key *get_key(u8 index)
{
- if (IS_ENABLED(CONFIG_STM32MP13x))
+ if (IS_ENABLED(CONFIG_STM32MP13X))
return &stm32mp13_list[index];
if (IS_ENABLED(CONFIG_STM32MP15x))
@@ -78,8 +78,8 @@ static const struct stm32key *get_key(u8 index)
static u32 get_otp_close_mask(void)
{
- if (IS_ENABLED(CONFIG_STM32MP13x))
- return STM32_OTP_STM32MP13x_CLOSE_MASK;
+ if (IS_ENABLED(CONFIG_STM32MP13X))
+ return STM32_OTP_STM32MP13X_CLOSE_MASK;
if (IS_ENABLED(CONFIG_STM32MP15x))
return STM32_OTP_STM32MP15x_CLOSE_MASK;
diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c
index 3b4c05d7451..6b69542ecfc 100644
--- a/arch/arm/mach-stm32mp/fdt.c
+++ b/arch/arm/mach-stm32mp/fdt.c
@@ -270,7 +270,7 @@ static int stm32_fdt_fixup_etzpc(void *fdt, int soc_node)
int offset, shift;
u32 addr, status, decprot[ETZPC_DECPROT_NB];
- if (IS_ENABLED(CONFIG_STM32MP13x)) {
+ if (IS_ENABLED(CONFIG_STM32MP13X)) {
array = stm32mp13_ip_addr;
array_size = ARRAY_SIZE(stm32mp13_ip_addr);
}
@@ -491,7 +491,7 @@ int ft_system_setup(void *blob, struct bd_info *bd)
cpu = get_cpu_type();
get_soc_name(name);
- if (IS_ENABLED(CONFIG_STM32MP13x))
+ if (IS_ENABLED(CONFIG_STM32MP13X))
stm32mp13_fdt_fixup(blob, soc, cpu, name);
if (IS_ENABLED(CONFIG_STM32MP15x)) {
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
index c85ae6a34ee..1e1f694cb62 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -32,7 +32,7 @@
#define STM32_USART1_BASE 0x5C000000
#define STM32_USART2_BASE 0x4000E000
#endif
-#ifdef CONFIG_STM32MP13x
+#ifdef CONFIG_STM32MP13X
#define STM32_USART1_BASE 0x4c000000
#define STM32_USART2_BASE 0x4c001000
#endif
@@ -130,7 +130,7 @@ enum boot_device {
#define TAMP_COPRO_STATE_CRASH 5
#endif
-#ifdef CONFIG_STM32MP13x
+#ifdef CONFIG_STM32MP13X
#define TAMP_BOOTCOUNT TAMP_BACKUP_REGISTER(31)
#define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(30)
#endif
@@ -167,7 +167,7 @@ enum forced_boot_mode {
#define BSEC_OTP_MAC 57
#define BSEC_OTP_BOARD 59
#endif
-#ifdef CONFIG_STM32MP13x
+#ifdef CONFIG_STM32MP13X
#define BSEC_OTP_RPN 1
#define BSEC_OTP_SERIAL 13
#define BSEC_OTP_MAC 57
diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig
index aba3590866e..ba17d3158d1 100644
--- a/board/st/common/Kconfig
+++ b/board/st/common/Kconfig
@@ -1,7 +1,7 @@
config CMD_STBOARD
bool "stboard - command for OTP board information"
depends on ARCH_STM32MP
- default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13x
+ default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13X
help
This compile the stboard command to
read and write the board in the OTP.
diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig
index 6ab8f80fa45..7d0d41bfea0 100644
--- a/board/st/stm32mp1/Kconfig
+++ b/board/st/stm32mp1/Kconfig
@@ -12,7 +12,7 @@ config SYS_CONFIG_NAME
source "board/st/common/Kconfig"
endif
-if TARGET_ST_STM32MP13x
+if TARGET_ST_STM32MP13X
config SYS_BOARD
default "stm32mp1"
diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
index ab824808f9d..7b9718400e8 100644
--- a/configs/stm32mp13_defconfig
+++ b/configs/stm32mp13_defconfig
@@ -5,10 +5,10 @@ CONFIG_SYS_MALLOC_F_LEN=0x180000
CONFIG_ENV_OFFSET=0x900000
CONFIG_DEFAULT_DEVICE_TREE="stm32mp135f-dk"
CONFIG_SYS_PROMPT="STM32MP> "
-CONFIG_STM32MP13x=y
+CONFIG_STM32MP13X=y
CONFIG_DDR_CACHEABLE_SIZE=0x10000000
CONFIG_CMD_STM32KEY=y
-CONFIG_TARGET_ST_STM32MP13x=y
+CONFIG_TARGET_ST_STM32MP13X=y
CONFIG_ENV_OFFSET_REDUND=0x940000
# CONFIG_ARMV7_NONSEC is not set
CONFIG_SYS_LOAD_ADDR=0xc2000000
diff --git a/drivers/clk/stm32/Kconfig b/drivers/clk/stm32/Kconfig
index 7a34ea23c38..7dbddd032b8 100644
--- a/drivers/clk/stm32/Kconfig
+++ b/drivers/clk/stm32/Kconfig
@@ -31,7 +31,7 @@ config CLK_STM32MP1
config CLK_STM32MP13
bool "Enable RCC clock driver for STM32MP13"
depends on ARCH_STM32MP && CLK
- default y if STM32MP13x
+ default y if STM32MP13X
select CLK_STM32_CORE
help
Enable the STM32 clock (RCC) driver. Enable support for
--
2.39.1.456.gfc5497dd1b-goog
More information about the U-Boot
mailing list