[PATCH v2 00/17] Basic StarFive JH7110 RISC-V SoC support
Andreas Schwab
schwab at suse.de
Tue Jan 24 15:46:04 CET 2023
On Jan 18 2023, Yanhong Wang wrote:
> This series of patches base on the latest branch/master, and add support
> for the StarFive JH7110 RISC-V SoC and VisionFive V2 board. In order for
> this to be achieved, the respective DT nodes have been added, and the
> required defconfigs have been added to the boards' defconfig. What is more,
> the basic required DM drivers have been added, such as reset, clock, pinctrl,
> uart, ram etc.
>
> Note that the register base address of reset controller is same with the
> clock controller. Therefore, there is no device tree node alone for reset
> driver. It binds device node in the clock driver.
>
> The u-boot-spl and u-boot has been tested on the VisionFive V2 boards which
> equip with JH7110 SoC and works normally.
I tried to put that on an SD card for testing and boot from it, but the
SPL cannot read it, thus fails to load U-Boot proper.
U-Boot SPL 2023.01-00735-gc8fc99adce (Jan 24 2023 - 15:11:27 +0100)
DDR version: dc2e84f0.
Trying to boot from MMC2
spl: partition error
SPL: failed to boot from all boot devices
--
Andreas Schwab, SUSE Labs, schwab at suse.de
GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7
"And now for something completely different."
More information about the U-Boot
mailing list