[PATCH 3/3] xilinx: board: Update logic in xilinx_read_eeprom_legacy

[Michal Simek]

When eeprom has random content printing random chars can stuck U-Boot.
That's why update legacy eeprom format decoding algorithm to copy only
maximum amount of chars allocated for fields.
And also print them directly from desc structure.

Previous algorithm was printing strings first directly from eeprom content
and then copy them to desc structure.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 board/xilinx/common/board.c | 24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)

diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
index 8bcb54da88e7..763232e2ff60 100644
--- a/board/xilinx/common/board.c
+++ b/board/xilinx/common/board.c
@@ -140,21 +140,25 @@ static int xilinx_read_eeprom_legacy(struct udevice *dev, char *name,
 
 	xilinx_eeprom_legacy_cleanup((char *)eeprom_content, size);
 
-	printf("Xilinx I2C Legacy format at %s:\n", name);
-	printf(" Board name:\t%s\n", eeprom_content->board_name);
-	printf(" Board rev:\t%s\n", eeprom_content->board_revision);
-	printf(" Board SN:\t%s\n", eeprom_content->board_sn);
+	/* Terminating \0 chars are the part of desc fields already */
+	strlcpy(desc->name, eeprom_content->board_name,
+		sizeof(eeprom_content->board_name));
+	strlcpy(desc->revision, eeprom_content->board_revision,
+		sizeof(eeprom_content->board_revision));
+	strlcpy(desc->serial, eeprom_content->board_sn,
+		sizeof(eeprom_content->board_sn));
 
 	eth_valid = is_valid_ethaddr((const u8 *)eeprom_content->eth_mac);
 	if (eth_valid)
-		printf(" Ethernet mac:\t%pM\n", eeprom_content->eth_mac);
+		memcpy(desc->mac_addr[0], eeprom_content->eth_mac, ETH_ALEN);
+
+	printf("Xilinx I2C Legacy format at %s:\n", name);
+	printf(" Board name:\t%s\n", desc->name);
+	printf(" Board rev:\t%s\n", desc->revision);
+	printf(" Board SN:\t%s\n", desc->serial);
 
-	/* Terminating \0 chars ensure end of string */
-	strcpy(desc->name, eeprom_content->board_name);
-	strcpy(desc->revision, eeprom_content->board_revision);
-	strcpy(desc->serial, eeprom_content->board_sn);
 	if (eth_valid)
-		memcpy(desc->mac_addr[0], eeprom_content->eth_mac, ETH_ALEN);
+		printf(" Ethernet mac:\t%pM\n", desc->mac_addr);
 
 	desc->header = EEPROM_HEADER_MAGIC;
 
-- 
2.36.1