[PATCH v4 6/6] doc: Add measured boot documentation

[Heinrich Schuchardt]

On 1/25/23 18:18, Eddie James wrote:
> Briefly describe the feature and specify the requirements.
>
> Signed-off-by: Eddie James <eajames at linux.ibm.com>
> ---
>   doc/usage/index.rst         |  1 +
>   doc/usage/measured_boot.rst | 23 +++++++++++++++++++++++
>   2 files changed, 24 insertions(+)
>   create mode 100644 doc/usage/measured_boot.rst
>
> diff --git a/doc/usage/index.rst b/doc/usage/index.rst
> index 7d4a1cbc10..c3efdf61df 100644
> --- a/doc/usage/index.rst
> +++ b/doc/usage/index.rst
> @@ -12,6 +12,7 @@ Use U-Boot
>      partitions
>      cmdline
>      semihosting
> +   measured_boot
>
>   Shell commands
>   --------------
> diff --git a/doc/usage/measured_boot.rst b/doc/usage/measured_boot.rst
> new file mode 100644
> index 0000000000..13fd42a2fb
> --- /dev/null
> +++ b/doc/usage/measured_boot.rst
> @@ -0,0 +1,23 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +Measured Boot
> +=====================
> +
> +U-Boot can perform a measured boot, the process of hashing various components
> +of the boot process, extending the results in the TPM and logging the
> +component's measurement in memory for the operating system to consume.
> +
> +Requirements
> +---------------------
> +
> +A hardware TPM 2.0 supported by the U-Boot drivers
> +CONFIG_TPM=y
> +CONFIG_MEASURED_BOOT=y

I guess this should be a bullet list instead of unformatted text.

https://www.sphinx-doc.org/en/master/usage/restructuredtext/basics.html#lists-and-quote-like-blocks
shows how to create a bullet list.

Please, use 'make htmldocs' to check the output. See
https://u-boot.readthedocs.io/en/latest/build/documentation.html
for setting up a build environment.

Best regards

Heinrich

> +Device-tree configuration of the TPM device to specify the memory area
> +for event logging. The TPM device node must either contain a phandle to
> +a reserved memory region or "linux,sml-base" and "linux,sml-size"
> +indicating the address and size of the memory region. An example can be
> +found in arch/sandbox/dts/test.dts
> +The operating system must also be configured to use the memory regions
> +specified in the U-Boot device-tree in order to make use of the event
> +log.