[RFC PATCH 00/16] arm: Add Rockchip RK3588 support
Jagan Teki
jagan at edgeble.ai
Wed Jan 25 23:27:25 CET 2023
This series support Rockchip RK3588. All the device tree files are
synced from linux-next with the proper SHA1 mentioned in the commit
messages.
Unfortunately, the BL31 from rkbin is not compatible with U-Boot so
it is failing to load ATF entry from SPL and hang.
Verified below BL31 versions,
bl31-v1.15
bl31-v1.21
bl31-v1.22
bl31-v1.23
bl31-v1.24
bl31-v1.25
bl31-v1.26
Rever-engineered with respect to rockchip u-boot by using the same
FIT_GENERATOR being used in Mainline, rockchip u-boot is booting but
mainline showing the same issue.
Log:
LPDDR4X, 2112MHz01-00642-g6bdfd31756-dirty (Jan 26 2023 ���3:44:34 +0530)
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL 2023.01-00642-g6bdfd31756-dirty (Jan 26 2023 - 03:44:34 +0530)
Trying to boot from MMC1
bl31_entry: atf_entry start
<< hang >>
Any information on BL31 for RK3588 please share.
Any inputs?
Jagan.
Jagan Teki (16):
rockchip: mkimage: Add rk3588 support
arm: rockchip: Add cru header for rk3588
arm: rockchip: Add grf header for rk3588
dt-bindings: clk: Add dt-binding header for RK3588
clk: rockchip: Add rk3588 clk support
clk: rockchip: pll: Add pll_rk3588 type for rk3588
ram: rockchip: Add rk3588 ddr driver support
dt-bindings: power: Add power-domain header for rk3588
dt-bindings: reset: add rk3588 reset definitions
arm: rockchip: Add ioc header for rk3588
arm64: dts: rockchip: Add base DT for rk3588 SoC
arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A SoM
arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO
arm: rockchip: Add RK3588 arch core support
ARM: dts: rockchip: Add rk3588-u-boot.dtsi
board: rockchip: Add Edgeble Neural Compute Module 6
arch/arm/dts/Makefile | 3 +
.../dts/rk3588-edgeble-neu6a-io-u-boot.dtsi | 23 +
arch/arm/dts/rk3588-edgeble-neu6a-io.dts | 27 +
arch/arm/dts/rk3588-edgeble-neu6a.dtsi | 32 +
arch/arm/dts/rk3588-pinctrl.dtsi | 516 +++
arch/arm/dts/rk3588-u-boot.dtsi | 101 +
arch/arm/dts/rk3588.dtsi | 58 +
arch/arm/dts/rk3588s-pinctrl.dtsi | 3403 +++++++++++++++++
arch/arm/dts/rk3588s.dtsi | 1703 +++++++++
arch/arm/include/asm/arch-rk3588/boot0.h | 11 +
arch/arm/include/asm/arch-rk3588/gpio.h | 11 +
arch/arm/include/asm/arch-rockchip/clock.h | 24 +
.../include/asm/arch-rockchip/cru_rk3588.h | 451 +++
.../include/asm/arch-rockchip/grf_rk3588.h | 35 +
.../include/asm/arch-rockchip/ioc_rk3588.h | 102 +
arch/arm/mach-rockchip/Kconfig | 20 +
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/rk3588/Kconfig | 30 +
arch/arm/mach-rockchip/rk3588/Makefile | 9 +
arch/arm/mach-rockchip/rk3588/clk_rk3588.c | 33 +
arch/arm/mach-rockchip/rk3588/rk3588.c | 162 +
arch/arm/mach-rockchip/rk3588/syscon_rk3588.c | 32 +
board/edgeble/neural-compute-module-6/Kconfig | 15 +
.../neural-compute-module-6/MAINTAINERS | 6 +
.../edgeble/neural-compute-module-6/Makefile | 7 +
board/edgeble/neural-compute-module-6/neu6.c | 4 +
configs/neu6a-io-rk3588_defconfig | 68 +
doc/board/rockchip/rockchip.rst | 2 +
drivers/clk/rockchip/Makefile | 1 +
drivers/clk/rockchip/clk_pll.c | 267 +-
drivers/clk/rockchip/clk_rk3588.c | 2019 ++++++++++
drivers/ram/rockchip/Makefile | 1 +
drivers/ram/rockchip/sdram_rk3588.c | 56 +
include/configs/neural-compute-module-6.h | 15 +
include/configs/rk3588_common.h | 32 +
.../dt-bindings/clock/rockchip,rk3588-cru.h | 766 ++++
include/dt-bindings/power/rk3588-power.h | 69 +
.../dt-bindings/reset/rockchip,rk3588-cru.h | 754 ++++
tools/rkcommon.c | 1 +
39 files changed, 10867 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/dts/rk3588-edgeble-neu6a-io-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3588-edgeble-neu6a-io.dts
create mode 100644 arch/arm/dts/rk3588-edgeble-neu6a.dtsi
create mode 100644 arch/arm/dts/rk3588-pinctrl.dtsi
create mode 100644 arch/arm/dts/rk3588-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3588.dtsi
create mode 100644 arch/arm/dts/rk3588s-pinctrl.dtsi
create mode 100644 arch/arm/dts/rk3588s.dtsi
create mode 100644 arch/arm/include/asm/arch-rk3588/boot0.h
create mode 100644 arch/arm/include/asm/arch-rk3588/gpio.h
create mode 100644 arch/arm/include/asm/arch-rockchip/cru_rk3588.h
create mode 100644 arch/arm/include/asm/arch-rockchip/grf_rk3588.h
create mode 100644 arch/arm/include/asm/arch-rockchip/ioc_rk3588.h
create mode 100644 arch/arm/mach-rockchip/rk3588/Kconfig
create mode 100644 arch/arm/mach-rockchip/rk3588/Makefile
create mode 100644 arch/arm/mach-rockchip/rk3588/clk_rk3588.c
create mode 100644 arch/arm/mach-rockchip/rk3588/rk3588.c
create mode 100644 arch/arm/mach-rockchip/rk3588/syscon_rk3588.c
create mode 100644 board/edgeble/neural-compute-module-6/Kconfig
create mode 100644 board/edgeble/neural-compute-module-6/MAINTAINERS
create mode 100644 board/edgeble/neural-compute-module-6/Makefile
create mode 100644 board/edgeble/neural-compute-module-6/neu6.c
create mode 100644 configs/neu6a-io-rk3588_defconfig
create mode 100644 drivers/clk/rockchip/clk_rk3588.c
create mode 100644 drivers/ram/rockchip/sdram_rk3588.c
create mode 100644 include/configs/neural-compute-module-6.h
create mode 100644 include/configs/rk3588_common.h
create mode 100644 include/dt-bindings/clock/rockchip,rk3588-cru.h
create mode 100644 include/dt-bindings/power/rk3588-power.h
create mode 100644 include/dt-bindings/reset/rockchip,rk3588-cru.h
--
2.25.1
More information about the U-Boot
mailing list