[PATCH 0/2] ARM: meson: Add support for Odroid-N2L

[Neil Armstrong]

ODROID-N2L is a variant SBC in small form factor and some peripherals
are removed from ODROID-N2PLUS based on S922X SoC.

- On-board ethernet is removed
- On-board RTC is removed
- USB 3.0 hub is removed, so one USB 2.0 and one USB 3.0 host ports
  are available
- Huge heatsink is replaced with 40x40mm heatsink, 5V active heatsink
  is recommended or a tall passive sink is optional
- 3.5mm earjack is removed
- IR remote receiver is removed
- MIPI DSI port is added

Is uses Odroid-N2L support posted at [1] and merged for Linux v6.3-rc1.

It doesn't use the odroid-n2 board support since ADC revision
collides with Odroid-N2+ and since it doesn't have on-board ethernet
no need to load the MAC address from eFuses.

[1] https://lore.kernel.org/all/20230122-topic-odroid-n2l-upstream-initial-v2-0-8d3fea6d403d@linaro.org/

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
Neil Armstrong (2):
      ARM: dts: Import Odroid-N2L support
      ARM: meson: Add support for Odroid-N2L

 arch/arm/dts/Makefile                          |   1 +
 arch/arm/dts/meson-g12b-odroid-n2.dtsi         | 410 +----------------------
 arch/arm/dts/meson-g12b-odroid-n2l-u-boot.dtsi |   7 +
 arch/arm/dts/meson-g12b-odroid-n2l.dts         | 125 +++++++
 arch/arm/dts/meson-g12b-odroid.dtsi            | 445 +++++++++++++++++++++++++
 configs/odroid-n2l_defconfig                   |  70 ++++
 doc/board/amlogic/index.rst                    |   2 +
 doc/board/amlogic/odroid-n2l.rst               |  31 ++
 8 files changed, 693 insertions(+), 398 deletions(-)
---
base-commit: 640192d04f9c4003959c967d11b2f98c3756c451
change-id: 20230126-u-boot-odroid-n2l-dc8b370b43c6

Best regards,
-- 
Neil Armstrong <neil.armstrong at linaro.org>