[PATCH v6 0/3] Timer support for ARM Tegra
Svyatoslav Ryhel
clamor95 at gmail.com
Thu Jan 26 18:12:34 CET 2023
I may implement changes of Thierry Reding in a proper form as a
separate patch or include in existing (depends on his choice).
The only thing I need to know is if ALL known T210 devices use
19.2MHz as calibration clock for timer?
Best regards.
Svyatoslav R.
чт, 26 січ. 2023 р. о 18:50 Tom Warren <TWarren at nvidia.com> пише:
>
> Thanks for testing T210/T186, Thierry.
>
> I had Svyatoslav's patches ready to go for a PR yesterday, so I'll need either a patch from you for the T210 changes that I can apply on top of his, or I'll need Svyatoslav to adopt your changes as a 4th patch in his series. Once I have that and can pass buildman OK, I'll be ready to send a PR to TomR.
>
> Tom
>
> -----Original Message-----
> From: Thierry Reding <thierry.reding at gmail.com>
> Sent: Thursday, January 26, 2023 4:41 AM
> To: Svyatoslav Ryhel <clamor95 at gmail.com>
> Cc: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>; Tom Warren <twarren at nvidia.com>; Marek Vasut <marex at denx.de>; Maxim Schwalm <maxim.schwalm at gmail.com>; Dmitry Osipenko <digetx at gmail.com>; Heinrich Schuchardt <xypron.glpk at gmx.de>; Michal Simek <michal.simek at amd.com>; Stefan Roese <sr at denx.de>; Eugen Hristev <eugen.hristev at microchip.com>; Michael Walle <michael at walle.cc>; Simon Glass <sjg at chromium.org>; Jim Liu <jim.t90615 at gmail.com>; William Zhang <william.zhang at broadcom.com>; Rick Chen <rick at andestech.com>; Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.com>; Andre Przywara <andre.przywara at arm.com>; Jaehoon Chung <jh80.chung at samsung.com>; u-boot at lists.denx.de
> Subject: Re: [PATCH v6 0/3] Timer support for ARM Tegra
>
> On Thu, Jan 26, 2023 at 11:34:59AM +0100, Thierry Reding wrote:
> > On Wed, Jan 25, 2023 at 05:41:08PM +0100, Thierry Reding wrote:
> > > On Tue, Jan 24, 2023 at 08:57:48AM +0200, Svyatoslav Ryhel wrote:
> > > > - ARM: tegra: remap clock_osc_freq for all Tegra family Enum
> > > > clock_osc_freq was designed to use only with T20.
> > > > This patch remaps it to use additional frequencies, added in
> > > > T30+ SoC while maintaining backwards compatibility with T20.
> > > >
> > > > - drivers: timer: add timer driver for ARMv7 based Tegra devices
> > > > Add timer support for T20/T30/T114 and T124 based devices.
> > > > Driver is based on DM, has device tree support and can be used on
> > > > SPL and early boot stage.
> > > >
> > > > - ARM: tegra: include timer as default option Enable TIMER as
> > > > default option for all Tegra devices and enable TEGRA_TIMER for
> > > > TEGRA_ARMV7_COMMON. Additionally enable SPL_TIMER if build as SPL
> > > > part and drop deprecated configs from common header.
> > > >
> > > > P. S. I have no arm64 Tegra and according to comment in
> > > > tegra-common.h Use the Tegra US timer on ARMv7, but the
> > > > architected timer on ARMv8.
> > > >
> > > > Svyatoslav Ryhel (3):
> > > > ARM: tegra: remap clock_osc_freq for all Tegra family
> > > > drivers: timer: add timer driver for ARMv7 based Tegra devices
> > > > ARM: tegra: include timer as default option
> > >
> > > This causes a regression on Tegra210 (Jetson TX1). I'm trying to
> > > investigate, but it's complicated by the fact that I'm not getting
> > > out any debug prints, so I suspect the issue is happening quite early.
> >
> > Alright, I managed to make this work on Tegra210 using the following
> > patch on top of this series:
> >
> > --- >8 ---
> > diff --git a/arch/arm/dts/tegra210.dtsi b/arch/arm/dts/tegra210.dtsi
> > index a521a43d6cfd..ccb5a927da89 100644
> > --- a/arch/arm/dts/tegra210.dtsi
> > +++ b/arch/arm/dts/tegra210.dtsi
> > @@ -318,7 +318,7 @@
> > };
> >
> > timer at 60005000 {
> > - compatible = "nvidia,tegra210-timer", "nvidia,tegra20-timer";
> > + compatible = "nvidia,tegra210-timer", "nvidia,tegra30-timer",
> > +"nvidia,tegra20-timer";
> > reg = <0x0 0x60005000 0x0 0x400>;
> > interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> > <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, diff --git
> > a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index
> > cc3f00e50128..b50eec5b8c9b 100644
> > --- a/arch/arm/mach-tegra/Kconfig
> > +++ b/arch/arm/mach-tegra/Kconfig
> > @@ -136,6 +136,7 @@ config TEGRA210
> > select TEGRA_PINCTRL
> > select TEGRA_PMC
> > select TEGRA_PMC_SECURE
> > + select TEGRA_TIMER
> >
> > config TEGRA186
> > bool "Tegra186 family"
> > diff --git a/drivers/timer/tegra-timer.c b/drivers/timer/tegra-timer.c
> > index d2d163cf3fef..235532ba8926 100644
> > --- a/drivers/timer/tegra-timer.c
> > +++ b/drivers/timer/tegra-timer.c
> > @@ -58,17 +58,26 @@ static notrace u64 tegra_timer_get_count(struct
> > udevice *dev) static int tegra_timer_probe(struct udevice *dev) {
> > struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev);
> > + enum clock_osc_freq freq;
> > u32 usec_config, value;
> >
> > /* Timer rate has to be set unconditionally */
> > uc_priv->clock_rate = TEGRA_TIMER_RATE;
> >
> > + /*
> > + * The microsecond timer runs off of clk_m on Tegra210, and clk_m
> > + * runs at half the OSC, so fake this up.
> > + */
> > + freq = clock_get_osc_freq();
> > + if (freq == CLOCK_OSC_FREQ_38_4)
> > + freq = CLOCK_OSC_FREQ_19_2;
> > +
> > /*
> > * Configure microsecond timers to have 1MHz clock
> > * Config register is 0xqqww, where qq is "dividend", ww is "divisor"
> > * Uses n+1 scheme
> > */
> > - switch (clock_get_osc_freq()) {
> > + switch (freq) {
> > case CLOCK_OSC_FREQ_13_0:
> > usec_config = 0x000c; /* (12+1)/(0+1) */
> > break;
> > @@ -113,6 +122,7 @@ static const struct udevice_id tegra_timer_ids[] = {
> > { .compatible = "nvidia,tegra30-timer" },
> > { .compatible = "nvidia,tegra114-timer" },
> > { .compatible = "nvidia,tegra124-timer" },
> > + { .compatible = "nvidia,tegra210-timer" },
> > { }
> > };
> > --- >8 ---
> >
> > I've also tested this on Tegra186, though no additional changes were
> > needed since Tegra186 doesn't use the Tegra timer.
> >
> > With the above folded in, the series is:
> >
> > Tested-by: Thierry Reding <treding at nvidia.com>
>
> I've also tested your series with the above on Tegra30 (Beaver) and
> Tegra124 (Jetson TK1), both seem to work fine.
>
> Thierry
More information about the U-Boot
mailing list