[GIT PULL] xilinx patches for v2023.04-rc1
Tom Rini
trini at konsulko.com
Fri Jan 27 18:45:46 CET 2023
On Fri, Jan 27, 2023 at 04:03:27PM +0100, Michal Simek wrote:
> Hi Tom,
>
> please pull these patches to your tree. Buildman doesn't show any issue and
> CI looks also good.
> https://source.denx.de/u-boot/custodians/u-boot-microblaze/-/commit/f0f86d39fec73479d4904e6d5b9db01a29597d58
>
> Thanks,
> Michal
>
> The following changes since commit 7b84c973b96775576dcff228d865e8570be26c82:
>
> ns16650: Correct CONFIG_SYS_NS16550_MEM32 platforms (2023-01-09 11:30:49 -0500)
>
> are available in the Git repository at:
>
> git at source.denx.de:u-boot/custodians/u-boot-microblaze.git
> tags/xilinx-for-v2023.04-rc1
>
> for you to fetch changes up to f0f86d39fec73479d4904e6d5b9db01a29597d58:
>
> fru: ops: Display FRU fields properly for 0xc1 fields (2023-01-27
> 08:49:24 +0100)
>
> ----------------------------------------------------------------
> Xilinx chnages for v2023.04-rc1
>
> makefile:
> - Add multi_dtb_fit dependency
>
> clk:
> - Handle error cases
>
> microblaze:
> - Disable falcon mode and cleanup code around
>
> xilinx:
> - Enable regular expression matching in board_fit_config_name_match()
> - Fix FRU handling for 0xC1 format
> - Fix Xilinx legacy format eeprom parsing
>
> zynqmp:
> - Some DT updates/cleanups
> - Fix IDcode for xck24
> - Remove empty mini config files
> - Add support for k24
>
> versal:
> - Remove empty mini config files
>
> versal_net:
> - Setup timer when runs in EL3
> - Build u-boot.elf for mini configurations
>
> zynq-gem:
> - Add support for new compatible strings
> - Remove support for Avnet Ultrazedev SOM
> - Handle SGMII with PCS phy
>
> spi:
> - Add support for gigadevice parts
>
> misc:
> - Remove CONFIG_TARGET_VENUS ifdef
> - Add missing headers to remove sparse warnings
>
> ----------------------------------------------------------------
> Algapally Santosh Sagar (5):
> xilinx: common: Include header file to fix warning
> gpio: zynqmp: Handle error from get_gpio_modepin
> xilinx: versal: Add missing header
> drivers: mmc: Change datatype of tuning_loop_counter to int
> fru: ops: Display FRU fields properly for 0xc1 fields
>
> Ashok Reddy Soma (1):
> xilinx: versal-net: Add support for timer and start it
>
> Harini Katakam (2):
> arm64: zynqmp: Describe TI phy as ethernet phy ID on ZCU102 RevB & up
> arm64: zynqmp: Enable TI phy reset via GPIO
>
> Jay Buddhabhatti (1):
> clk: versal: Return error in case if clock setup failed
>
> Luca Ceresoli (1):
> arm64: zynqmp: remove Avnet UltraZed-EV Starter Kit
>
> Michal Simek (19):
> arm64: zynqmp: Sync #dma-cells property location
> arm64: zynqmp: Added GEM reset definitions
> arm64: zynqmp: Fix AMS device tree node
> arm64: zynqmp: Align gpio-key node names with dtschema
> arm64: zynqmp: Remove id from usb node name
> net: zynq_gem: Add support for new compatible str with xlnx prefix
> arm64: zynqmp: Remove unused USB DT properties
> arm64: zynqmp: Remove unused snps,refclk_fladj property
> board: presidio-asic: Remove CONFIG_TARGET_VENUS
> xilinx: common: Add support for partial string match in
> board_fit_config_name_match()
> soc: zynqmp: Fix IDcode for xck24
> arm64: zynqmp: Remove xilinx_zynqmp_mini_emmc/qspi.h configs
> arm64: versal: Remove xilinx_versal_mini_qspi.h configs
> arm64: zynqmp: Fill model name for SOM CCs
> arm64: zynqmp: Add support for Kria K24 SOM
> arm64: versal-net: Enable remaking ELF from bin
> xilinx: board: Use ETH_ALEN macro for mac address size
> xilinx: board: Fix xilinx_eeprom_legacy_cleanup()
> xilinx: board: Update logic in xilinx_read_eeprom_legacy
>
> Neal Frager (1):
> makefile: add multi_dtb_fit dep
>
> Ovidiu Panait (3):
> microblaze: spl: wrap spl_start_uboot() in SPL_OS_BOOT ifdefs
> microblaze: spl: drop boot_linux
> microblaze: spl: disable falcon mode by default
>
> Stefan Roese (1):
> net: zynq_gem: Wait for SGMII PCS link in zynq_gem_init()
>
> Victor Lim (4):
> mtd: spi-nor-ids: add gigadevice part #
> configs: zynq: enable gigadevice
> arm64: zynqmp: enable gigadevice
> xilinx: versal: enable gigadevice
>
> Makefile | 1 +
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dts | 59 --
> arch/arm/dts/avnet-ultrazedev-som-v1.0.dtsi | 56 --
> arch/arm/dts/zynqmp-dlc21-revA.dts | 4 -
> arch/arm/dts/zynqmp-g-a2197-00-revA.dts | 2 -
> arch/arm/dts/zynqmp-m-a2197-01-revA.dts | 4 -
> arch/arm/dts/zynqmp-m-a2197-02-revA.dts | 4 -
> arch/arm/dts/zynqmp-m-a2197-03-revA.dts | 4 -
> arch/arm/dts/zynqmp-p-a2197-00-revA.dts | 4 -
> arch/arm/dts/zynqmp-sck-kr-g-revA.dts | 1 +
> arch/arm/dts/zynqmp-sck-kr-g-revB.dts | 1 +
> arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 1 +
> arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 1 +
> arch/arm/dts/zynqmp-sm-k24-revA.dts | 22 +
> arch/arm/dts/zynqmp-sm-k26-revA.dts | 2 +-
> arch/arm/dts/zynqmp-smk-k24-revA.dts | 21 +
> arch/arm/dts/zynqmp-zcu100-revC.dts | 2 +-
> arch/arm/dts/zynqmp-zcu102-revA.dts | 2 +-
> arch/arm/dts/zynqmp-zcu102-revB.dts | 22 +-
> arch/arm/dts/zynqmp-zcu106-revA.dts | 2 +-
> arch/arm/dts/zynqmp-zcu111-revA.dts | 2 +-
> arch/arm/dts/zynqmp.dtsi | 58 +-
> arch/arm/mach-versal-net/Kconfig | 12 +
> arch/arm/mach-versal-net/include/mach/hardware.h | 30 +
> arch/microblaze/cpu/spl.c | 11 +-
> board/cortina/presidio-asic/lowlevel_init.S | 2 -
> board/xilinx/common/board.c | 57 +-
> board/xilinx/common/fru_ops.c | 43 +-
> board/xilinx/versal-net/board.c | 41 +
> board/xilinx/versal/board.c | 1 +
> board/xilinx/zynqmp/MAINTAINERS | 6 -
>
> board/xilinx/zynqmp/avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0/psu_init_gpl.c
> | 655 ------------
> board/xilinx/zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c | 1061
> ++++++++++++++++++++
> board/xilinx/zynqmp/zynqmp-smk-k24-revA | 1 +
> configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig | 83 --
> configs/microblaze-generic_defconfig | 3 -
> configs/xilinx_versal_mini_defconfig | 2 +-
> configs/xilinx_versal_mini_ospi_defconfig | 2 +-
> configs/xilinx_versal_mini_qspi_defconfig | 3 +-
> configs/xilinx_versal_net_mini_defconfig | 2 +
> configs/xilinx_versal_net_virt_defconfig | 1 +
> configs/xilinx_zynq_virt_defconfig | 1 +
> configs/xilinx_zynqmp_mini_defconfig | 2 +-
> configs/xilinx_zynqmp_mini_emmc0_defconfig | 2 +-
> configs/xilinx_zynqmp_mini_emmc1_defconfig | 2 +-
> configs/xilinx_zynqmp_mini_qspi_defconfig | 3 +-
> configs/xilinx_zynqmp_virt_defconfig | 1 +
> configs/zynq_cse_qspi_defconfig | 1 +
> drivers/clk/clk_versal.c | 4 +-
> drivers/gpio/zynqmp_gpio_modepin.c | 3 +
> drivers/mmc/zynq_sdhci.c | 2 +-
> drivers/mtd/spi/spi-nor-ids.c | 68 ++
> drivers/net/zynq_gem.c | 42 +-
> drivers/soc/soc_xilinx_zynqmp.c | 2 +-
> include/configs/xilinx_versal_mini_qspi.h | 15 -
> include/configs/xilinx_zynqmp_mini_emmc.h | 15 -
> include/configs/xilinx_zynqmp_mini_qspi.h | 15 -
> 58 files changed, 1446 insertions(+), 1026 deletions(-)
> delete mode 100644 arch/arm/dts/avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dts
> delete mode 100644 arch/arm/dts/avnet-ultrazedev-som-v1.0.dtsi
> create mode 100644 arch/arm/dts/zynqmp-sm-k24-revA.dts
> create mode 100644 arch/arm/dts/zynqmp-smk-k24-revA.dts
> delete mode 100644 board/xilinx/zynqmp/avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0/psu_init_gpl.c
> create mode 100644 board/xilinx/zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c
> create mode 120000 board/xilinx/zynqmp/zynqmp-smk-k24-revA
> delete mode 100644 configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
> delete mode 100644 include/configs/xilinx_versal_mini_qspi.h
> delete mode 100644 include/configs/xilinx_zynqmp_mini_emmc.h
> delete mode 100644 include/configs/xilinx_zynqmp_mini_qspi.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20230127/9bf41041/attachment.sig>
More information about the U-Boot
mailing list