[PATCH 111/171] Correct SPL uses of MULTIPLEXER

[Simon Glass]

This converts 3 usages of this option to the non-SPL form, since there is
no SPL_MULTIPLEXER defined in Kconfig

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 drivers/Makefile     | 2 +-
 drivers/mux/Makefile | 2 +-
 include/mux.h        | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/Makefile b/drivers/Makefile
index 15d19d0c8a3..20497aa2ac9 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/
 obj-$(CONFIG_$(SPL_TPL_)LED) += led/
 obj-$(CONFIG_$(SPL_TPL_)MMC) += mmc/
 obj-y += mtd/
-obj-$(CONFIG_$(SPL_)MULTIPLEXER) += mux/
+obj-$(CONFIG_MULTIPLEXER) += mux/
 obj-$(CONFIG_$(SPL_TPL_)ETH) += net/
 obj-$(CONFIG_$(SPL_TPL_)PCH) += pch/
 obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
diff --git a/drivers/mux/Makefile b/drivers/mux/Makefile
index 78ebf04c7a9..d4e24789d33 100644
--- a/drivers/mux/Makefile
+++ b/drivers/mux/Makefile
@@ -3,5 +3,5 @@
 # (C) Copyright 2019
 # Jean-Jacques Hiblot <jjhiblot at ti.com>
 
-obj-$(CONFIG_$(SPL_)MULTIPLEXER) += mux-uclass.o
+obj-$(CONFIG_MULTIPLEXER) += mux-uclass.o
 obj-$(CONFIG_$(SPL_)MUX_MMIO) += mmio.o
diff --git a/include/mux.h b/include/mux.h
index 9f809912742..c92d887591e 100644
--- a/include/mux.h
+++ b/include/mux.h
@@ -23,7 +23,7 @@
 struct udevice;
 struct mux_control;
 
-#if CONFIG_IS_ENABLED(MULTIPLEXER)
+#if IS_ENABLED(CONFIG_MULTIPLEXER)
 /**
  * mux_control_states() - Query the number of multiplexer states.
  * @mux: The mux-control to query.
-- 
2.39.1.456.gfc5497dd1b-goog