[PATCH 05/23] imx: imx8ulp: Remove the TRDC configure from A35

[Ye Li]

As M33 is responsible for TRDC configuration, the settings for A35
nonsecure world access and DMA0 access are moved to M33 image.
So remove the codes to release TRDC and configure it. Just keep
the configurations for reference.

Signed-off-by: Ye Li <ye.li at nxp.com>
Reviewed-by: Jacky Bai <ping.bai at nxp.com>
---
 arch/arm/mach-imx/imx8ulp/soc.c | 63 +++++++++++++++++++++++++++++------------
 1 file changed, 45 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-imx/imx8ulp/soc.c b/arch/arm/mach-imx/imx8ulp/soc.c
index 4370399..0d7858a 100644
--- a/arch/arm/mach-imx/imx8ulp/soc.c
+++ b/arch/arm/mach-imx/imx8ulp/soc.c
@@ -556,33 +556,65 @@ static void set_core0_reset_vector(u32 entry)
 	setbits_le32(SIM1_BASE_ADDR + 0x8, (0x1 << 26));
 }
 
-static int trdc_set_access(void)
+/* Not used now */
+int trdc_set_access(void)
 {
 	/*
 	 * TRDC mgr + 4 MBC + 2 MRC.
-	 * S400 should already configure when release RDC
-	 * A35 only map non-secure region for pbridge0 and 1, set sec_access to false
 	 */
-	trdc_mbc_set_access(2, 7, 0, 49, false);
-	trdc_mbc_set_access(2, 7, 0, 50, false);
-	trdc_mbc_set_access(2, 7, 0, 51, false);
-	trdc_mbc_set_access(2, 7, 0, 52, false);
-	trdc_mbc_set_access(2, 7, 0, 53, false);
-	trdc_mbc_set_access(2, 7, 0, 54, false);
-
-	/* CGC0: PBridge0 slot 47 */
+	trdc_mbc_set_access(2, 7, 0, 49, true);
+	trdc_mbc_set_access(2, 7, 0, 50, true);
+	trdc_mbc_set_access(2, 7, 0, 51, true);
+	trdc_mbc_set_access(2, 7, 0, 52, true);
+	trdc_mbc_set_access(2, 7, 0, 53, true);
+	trdc_mbc_set_access(2, 7, 0, 54, true);
+
+	/* 0x1fff8000 used for resource table by remoteproc */
+	trdc_mbc_set_access(0, 7, 2, 31, false);
+
+	/* CGC0: PBridge0 slot 47 and PCC0 slot 48 */
 	trdc_mbc_set_access(2, 7, 0, 47, false);
+	trdc_mbc_set_access(2, 7, 0, 48, false);
+
+	/* PCC1 */
+	trdc_mbc_set_access(2, 7, 1, 17, false);
+	trdc_mbc_set_access(2, 7, 1, 34, false);
 
 	/* Iomuxc0: : PBridge1 slot 33 */
 	trdc_mbc_set_access(2, 7, 1, 33, false);
 
 	/* flexspi0 */
+	trdc_mbc_set_access(2, 7, 0, 57, false);
 	trdc_mrc_region_set_access(0, 7, 0x04000000, 0x0c000000, false);
 
 	/* tpm0: PBridge1 slot 21 */
 	trdc_mbc_set_access(2, 7, 1, 21, false);
 	/* lpi2c0: PBridge1 slot 24 */
 	trdc_mbc_set_access(2, 7, 1, 24, false);
+
+	/* Allow M33 to access TRDC MGR */
+	trdc_mbc_set_access(2, 6, 0, 49, true);
+	trdc_mbc_set_access(2, 6, 0, 50, true);
+	trdc_mbc_set_access(2, 6, 0, 51, true);
+	trdc_mbc_set_access(2, 6, 0, 52, true);
+	trdc_mbc_set_access(2, 6, 0, 53, true);
+	trdc_mbc_set_access(2, 6, 0, 54, true);
+
+	/* Set SAI0 for eDMA 0, NS */
+	trdc_mbc_set_access(2, 0, 1, 28, false);
+
+	/* Set SSRAM for eDMA0 access */
+	trdc_mbc_set_access(0, 0, 2, 0, false);
+	trdc_mbc_set_access(0, 0, 2, 1, false);
+	trdc_mbc_set_access(0, 0, 2, 2, false);
+	trdc_mbc_set_access(0, 0, 2, 3, false);
+	trdc_mbc_set_access(0, 0, 2, 4, false);
+	trdc_mbc_set_access(0, 0, 2, 5, false);
+	trdc_mbc_set_access(0, 0, 2, 6, false);
+	trdc_mbc_set_access(0, 0, 2, 7, false);
+
+	writel(0x800000a0, 0x28031840);
+
 	return 0;
 }
 
@@ -654,15 +686,10 @@ int arch_cpu_init(void)
 		if (!ret)
 			rdc_en = !!(val & 0x4000);
 
-		if (get_boot_mode() == SINGLE_BOOT) {
-			if (rdc_en)
-				release_rdc(RDC_TRDC);
-
-			trdc_set_access();
+		if (get_boot_mode() == SINGLE_BOOT)
 			lpav_configure(false);
-		} else {
+		else
 			lpav_configure(true);
-		}
 
 		/* Release xrdc, then allow A35 to write SRAM2 */
 		if (rdc_en)
-- 
2.7.4