[PATCH 2/2] ARM: tegra: Enable poweroff command on Jetson TX2

[Thierry Reding]

From: Thierry Reding <treding at nvidia.com>

This command is useful to power off the system from within U-Boot.

Signed-off-by: Thierry Reding <treding at nvidia.com>
---
 configs/p2771-0000-000_defconfig | 1 +
 configs/p2771-0000-500_defconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/configs/p2771-0000-000_defconfig b/configs/p2771-0000-000_defconfig
index 682be7d602c9..b769a62efe52 100644
--- a/configs/p2771-0000-000_defconfig
+++ b/configs/p2771-0000-000_defconfig
@@ -23,6 +23,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_SPI=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_BOOTP_PREFER_SERVERIP=y
diff --git a/configs/p2771-0000-500_defconfig b/configs/p2771-0000-500_defconfig
index c5925b18c9f2..421b6b815b0f 100644
--- a/configs/p2771-0000-500_defconfig
+++ b/configs/p2771-0000-500_defconfig
@@ -23,6 +23,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_SPI=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_BOOTP_PREFER_SERVERIP=y
-- 
2.39.1