[PATCH v4 10/11] configs: starfive: Enable ethernet configuration for StarFive VisionFive2

[Jan Kiszka]

On 25.05.23 11:36, Yanhong Wang wrote:
> Enable DWC_ETH_QOS and PHY_MOTORCOMM configuration to support ethernet
> function for StarFive VisionFive 2 board,including versions 1.2A and
> 1.3B.
> 
> Signed-off-by: Yanhong Wang <yanhong.wang at starfivetech.com>
> ---
>  configs/starfive_visionfive2_defconfig | 13 +++++++++++--
>  1 file changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig
> index ffbc4b9476..c57708199d 100644
> --- a/configs/starfive_visionfive2_defconfig
> +++ b/configs/starfive_visionfive2_defconfig
> @@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>  CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000000
>  CONFIG_SF_DEFAULT_SPEED=100000000
>  CONFIG_SPL_DM_SPI=y
> -CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2-v1.3b"
> +CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2"
>  CONFIG_SPL_TEXT_BASE=0x8000000
>  CONFIG_SYS_PROMPT="StarFive #"
>  CONFIG_OF_LIBFDT_OVERLAY=y
> @@ -31,7 +31,7 @@ CONFIG_USE_BOOTARGS=y
>  CONFIG_BOOTARGS="console=ttyS0,115200 debug rootwait earlycon=sbi"
>  CONFIG_USE_PREBOOT=y
>  CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};"
> -CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2-v1.3b.dtb"
> +CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2.dtb"

These two hunks belong into patch 7.

Jan

>  CONFIG_DISPLAY_CPUINFO=y
>  CONFIG_DISPLAY_BOARDINFO=y
>  CONFIG_SPL_MAX_SIZE=0x40000
> @@ -54,6 +54,8 @@ CONFIG_SYS_BOOTM_LEN=0x4000000
>  CONFIG_CMD_MEMINFO=y
>  CONFIG_CMD_TFTPPUT=y
>  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SYSCON=y
>  CONFIG_SPL_CLK_COMPOSITE_CCF=y
>  CONFIG_CLK_COMPOSITE_CCF=y
>  CONFIG_SPL_CLK_JH7110=y
> @@ -66,6 +68,13 @@ CONFIG_SPI_FLASH_EON=y
>  CONFIG_SPI_FLASH_GIGADEVICE=y
>  CONFIG_SPI_FLASH_ISSI=y
>  CONFIG_SPI_FLASH_MACRONIX=y
> +CONFIG_PHY_MOTORCOMM=y
> +CONFIG_DM_MDIO=y
> +CONFIG_DM_ETH_PHY=y
> +CONFIG_DWC_ETH_QOS=y
> +CONFIG_DWC_ETH_QOS_STARFIVE=y
> +CONFIG_RGMII=y
> +CONFIG_RMII=y
>  CONFIG_PINCTRL=y
>  CONFIG_PINCONF=y
>  CONFIG_SPL_PINCTRL=y

-- 
Siemens AG, Technology
Competence Center Embedded Linux