[PATCH] arm: mvebu: Clean up Thecus N2350 board DTS
Tony Dinh
mibodhi at gmail.com
Tue Jun 6 23:45:39 CEST 2023
- Update the Thecus N2350 DTS to conform with latest device-tree binding
and styles.
- Correct typo in mdio node.
Signed-off-by: Tony Dinh <mibodhi at gmail.com>
---
arch/arm/dts/armada-385-thecus-n2350.dts | 210 +++++++++++------------
1 file changed, 98 insertions(+), 112 deletions(-)
diff --git a/arch/arm/dts/armada-385-thecus-n2350.dts b/arch/arm/dts/armada-385-thecus-n2350.dts
index fc29c4d25a..2ad5158c0c 100644
--- a/arch/arm/dts/armada-385-thecus-n2350.dts
+++ b/arch/arm/dts/armada-385-thecus-n2350.dts
@@ -23,7 +23,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0x00000000 0x40000000>; /* 1GB */
};
@@ -37,43 +37,43 @@
};
- usb3_0_phy: usb3_0_phy {
+ usb3_0_phy: usb-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&usb3_0_power>;
+ #phy-cells = <0>;
};
- usb3_1_phy: usb3_1_phy {
+ usb3_1_phy: usb-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&usb3_1_power>;
+ #phy-cells = <0>;
};
- gpio-keys {
+ keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_power_button &pmx_copy_button &pmx_reset_button>;
pinctrl-names = "default";
- button at 1 {
+ button-1 {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
};
- button at 2 {
+ button-2 {
label = "Copy Button";
linux,code = <KEY_COPY>;
gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
};
- button at 3 {
+ button-3 {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
};
};
- gpio-leds {
+ leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_sata1_white_led
&pmx_sata1_red_led
@@ -88,142 +88,132 @@
pinctrl-names = "default";
- white_sata1 {
+ led-1 {
label = "n2350:white:sata1";
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ide-disk1";
};
- red_sata1 {
+ led-2 {
label = "n2350:red:sata1";
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
- white-sata2 {
+ led-3 {
label = "n2350:white:sata2";
gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
};
- red-sata2 {
+ led-4 {
label = "n2350:red:sata2";
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
};
- white-sys {
+ led-5 {
label = "n2350:white:sys";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- red-sys {
+ led-6 {
label = "n2350:red:sys";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
- blue-pwr {
+ led-7 {
label = "n2350:blue:pwr";
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
- red-pwr {
+ led-8 {
label = "n2350:red:pwr";
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
};
- white-usb {
+ led-9 {
label = "n2350:white:usb";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
- red-usb {
+ led-10 {
label = "n2350:red:usb";
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_0_power: regulator at 1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB3_0_Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
- };
-
- usb3_1_power: regulator at 2 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB3_1_Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
- };
+ usb3_0_power: v5-vbus0 {
+ compatible = "regulator-fixed";
+ regulator-name = "USB3_0_Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
- reg_sata0: regulator at 3 {
- compatible = "regulator-fixed";
- regulator-name = "pwr_en_sata0";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- };
+ usb3_1_power: v5-vbus1 {
+ compatible = "regulator-fixed";
+ regulator-name = "USB3_1_Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ };
- reg_5v_sata0: v5-sata0 {
- compatible = "regulator-fixed";
- regulator-name = "v5.0-sata0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <®_sata0>;
- };
+ reg_sata0: pwr-sata0 {
+ compatible = "regulator-fixed";
+ regulator-name = "pwr_en_sata0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
- reg_12v_sata0: v12-sata0 {
- compatible = "regulator-fixed";
- regulator-name = "v12.0-sata0";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- vin-supply = <®_sata0>;
- };
+ reg_5v_sata0: v5-sata0 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-sata0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_sata0>;
+ };
- reg_sata1: regulator at 4 {
- regulator-name = "pwr_en_sata1";
- compatible = "regulator-fixed";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- };
+ reg_12v_sata0: v12-sata0 {
+ compatible = "regulator-fixed";
+ regulator-name = "v12.0-sata0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <®_sata0>;
+ };
- reg_5v_sata1: v5-sata1 {
- compatible = "regulator-fixed";
- regulator-name = "v5.0-sata1";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <®_sata1>;
- };
+ reg_sata1: pwr-sata0 {
+ regulator-name = "pwr_en_sata1";
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
- reg_12v_sata1: v12-sata1 {
- compatible = "regulator-fixed";
- regulator-name = "v12.0-sata1";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- vin-supply = <®_sata1>;
- };
+ reg_5v_sata1: v5-sata1 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-sata1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_sata1>;
+ };
+ reg_12v_sata1: v12-sata1 {
+ compatible = "regulator-fixed";
+ regulator-name = "v12.0-sata1";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <®_sata1>;
};
gpio-poweroff {
@@ -267,7 +257,7 @@
};
&mdio {
- phy0: ethernet-phy at 0 {
+ phy0: ethernet-phy at 1 {
reg = <1>;
};
};
@@ -301,18 +291,14 @@
&pciec {
status = "okay";
- /*
- * The two PCIe units are accessible through
- * standard PCIe slots on the board.
- */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie at 2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
};
&pinctrl {
@@ -408,10 +394,10 @@
status = "okay";
/* spi: 4M Flash Macronix MX25L3205D */
- spi-flash at 0 {
+ flash at 0 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "macronix,mx25l3205d", "jedec,spi-nor";
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <108000000>;
--
2.39.2
More information about the U-Boot
mailing list