[PATCH 4/5] sunxi: H616: add DRAM type selection

[Andre Przywara]

From: iuncuim <iuncuim at gmail.com>

Allwinner H616 SoC supports several types of DRAM memory. To further
integrate other types of memory, we need to add this delimitation.
---
 arch/arm/mach-sunxi/Kconfig               | 10 +++++++++-
 arch/arm/mach-sunxi/dram_timings/Makefile |  3 +--
 configs/orangepi_zero2_defconfig          |  1 +
 configs/x96_mate_defconfig                |  1 +
 4 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 6dcbb096f74..197d77ea658 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -442,7 +442,7 @@ config ARM_BOOT_HOOK_RMR
 	This allows both the SPL and the U-Boot proper to be entered in
 	either mode and switch to AArch64 if needed.
 
-if SUNXI_DRAM_DW || DRAM_SUN50I_H6
+if SUNXI_DRAM_DW || DRAM_SUN50I_H6 || DRAM_SUN50I_H616
 config SUNXI_DRAM_DDR3
 	bool
 
@@ -487,6 +487,14 @@ config SUNXI_DRAM_H6_DDR3_1333
 	This option is the DDR3 timing used by the boot0 on H6 TV boxes
 	which use a DDR3-1333 timing.
 
+config SUNXI_DRAM_H616_DDR3_1333
+	bool "DDR3-1333 boot0 timings on the H616 DRAM controller"
+	select SUNXI_DRAM_DDR3
+	depends on DRAM_SUN50I_H616
+	---help---
+	This option is the DDR3 timing used by the boot0 on H616 TV boxes
+	which use a DDR3-1333 timing.
+
 config SUNXI_DRAM_DDR2_V3S
 	bool "DDR2 found in V3s chip"
 	select SUNXI_DRAM_DDR2
diff --git a/arch/arm/mach-sunxi/dram_timings/Makefile b/arch/arm/mach-sunxi/dram_timings/Makefile
index 39a8756c297..4d78c04c9ae 100644
--- a/arch/arm/mach-sunxi/dram_timings/Makefile
+++ b/arch/arm/mach-sunxi/dram_timings/Makefile
@@ -3,5 +3,4 @@ obj-$(CONFIG_SUNXI_DRAM_LPDDR3_STOCK)	+= lpddr3_stock.o
 obj-$(CONFIG_SUNXI_DRAM_DDR2_V3S)	+= ddr2_v3s.o
 obj-$(CONFIG_SUNXI_DRAM_H6_LPDDR3)	+= h6_lpddr3.o
 obj-$(CONFIG_SUNXI_DRAM_H6_DDR3_1333)	+= h6_ddr3_1333.o
-# currently only DDR3 is supported on H616
-obj-$(CONFIG_MACH_SUN50I_H616)		+= h616_ddr3_1333.o
+obj-$(CONFIG_SUNXI_DRAM_H616_DDR3_1333)	+= h616_ddr3_1333.o
diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig
index 6cb942f511a..e38cc20ac72 100644
--- a/configs/orangepi_zero2_defconfig
+++ b/configs/orangepi_zero2_defconfig
@@ -7,6 +7,7 @@ CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
 CONFIG_DRAM_SUN50I_H616_CA_DRI=0x0e0e
 CONFIG_DRAM_SUN50I_H616_TPR10=0xf83438
 CONFIG_MACH_SUN50I_H616=y
+CONFIG_SUNXI_DRAM_H616_DDR3_1333=y
 CONFIG_R_I2C_ENABLE=y
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
diff --git a/configs/x96_mate_defconfig b/configs/x96_mate_defconfig
index 122c1a99e32..c86cf43771c 100644
--- a/configs/x96_mate_defconfig
+++ b/configs/x96_mate_defconfig
@@ -10,6 +10,7 @@ CONFIG_DRAM_SUN50I_H616_TPR10=0x2f0007
 CONFIG_DRAM_SUN50I_H616_TPR11=0xffffdddd
 CONFIG_DRAM_SUN50I_H616_TPR12=0xfedf7557
 CONFIG_MACH_SUN50I_H616=y
+CONFIG_SUNXI_DRAM_H616_DDR3_1333=y
 CONFIG_R_I2C_ENABLE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_I2C=y
-- 
2.35.8