[PATCH v2 8/8] configs: am62x_evm_*: Enable USB and DFU support

Thu Jun 8 23:41:13 CEST 2023

Hi Sjoerd

Thanks for this series.

On Thu, 2023-04-06 at 20:55 +0200, Sjoerd Simons wrote:
> Enable USB host as well as USB gadget and DFU support for a53; For the
> r5 due to the smaller available size create a new config just for
> DFU support
> 
> Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>

With the nitpick about CONFIG_USB_XHCI_DWC3 (needs to be removed) below.

Tested-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

I tested both USB device aka gadget (with DFU and UMS) as well as USB host on both the TI AM625 EVM aka SK as
well as the Toradex Verdin AM62 [1] (plus USB integration analogous to EVM/SK to be posted later).

[1] https://lore.kernel.org/all/20230607120639.82087-1-marcel@ziswiler.com/

> ---
> 
> Changes in v2:
> - Create a seperate defconfig for R5
> 
>  configs/am62x_evm_a53_defconfig       |  35 +++++++-
>  configs/am62x_evm_r5_usbdfu_defconfig | 116 ++++++++++++++++++++++++++
>  2 files changed, 148 insertions(+), 3 deletions(-)
>  create mode 100644 configs/am62x_evm_r5_usbdfu_defconfig
> 
> diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig
> index cc9c8eab3e3..7dbf2f54050 100644
> --- a/configs/am62x_evm_a53_defconfig
> +++ b/configs/am62x_evm_a53_defconfig
> @@ -1,5 +1,6 @@
>  CONFIG_ARM=y
>  CONFIG_ARCH_K3=y
> +CONFIG_SYS_MALLOC_LEN=0x2000000
>  CONFIG_SYS_MALLOC_F_LEN=0x8000
>  CONFIG_SPL_LIBCOMMON_SUPPORT=y
>  CONFIG_SPL_LIBGENERIC_SUPPORT=y
> @@ -9,9 +10,11 @@ CONFIG_K3_ATF_LOAD_ADDR=0x9e780000
>  CONFIG_TARGET_AM625_A53_EVM=y
>  CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>  CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
> +CONFIG_SF_DEFAULT_SPEED=25000000
>  CONFIG_SPL_DM_SPI=y
>  CONFIG_DEFAULT_DEVICE_TREE="k3-am625-sk"
>  CONFIG_SPL_TEXT_BASE=0x80080000
> +CONFIG_OF_LIBFDT_OVERLAY=y
>  CONFIG_DM_RESET=y
>  CONFIG_SPL_MMC=y
>  CONFIG_SPL_SERIAL=y
> @@ -33,17 +36,23 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>  CONFIG_SPL_STACK_R=y
>  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
>  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
> +CONFIG_SPL_ENV_SUPPORT=y
>  CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
>  CONFIG_SPL_DM_MAILBOX=y
>  CONFIG_SPL_DM_SPI_FLASH=y
>  CONFIG_SPL_POWER_DOMAIN=y
> +CONFIG_SPL_RAM_SUPPORT=y
> +CONFIG_SPL_RAM_DEVICE=y
>  # CONFIG_SPL_SPI_FLASH_TINY is not set
>  CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
>  CONFIG_SPL_SPI_LOAD=y
>  CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
> +CONFIG_SPL_USB_GADGET=y
> +CONFIG_SPL_DFU=y
>  CONFIG_SPL_YMODEM_SUPPORT=y
> -CONFIG_SYS_BOOTM_LEN=0x800000
> +CONFIG_CMD_DFU=y
>  CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
>  CONFIG_OF_CONTROL=y
>  CONFIG_SPL_OF_CONTROL=y
>  CONFIG_MULTI_DTB_FIT=y
> @@ -54,10 +63,17 @@ CONFIG_SPL_DM=y
>  CONFIG_SPL_DM_SEQ_ALIAS=y
>  CONFIG_REGMAP=y
>  CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
>  CONFIG_SPL_OF_TRANSLATE=y
>  CONFIG_CLK=y
>  CONFIG_SPL_CLK=y
>  CONFIG_CLK_TI_SCI=y
> +CONFIG_DFU_MMC=y
> +CONFIG_DFU_RAM=y
> +CONFIG_DFU_SF=y
> +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
> +CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
>  CONFIG_DMA_CHANNELS=y
>  CONFIG_TI_K3_NAVSS_UDMA=y
>  CONFIG_TI_SCI_PROTOCOL=y
> @@ -68,7 +84,6 @@ CONFIG_MMC_SDHCI_ADMA=y
>  CONFIG_SPL_MMC_SDHCI_ADMA=y
>  CONFIG_MMC_SDHCI_AM654=y
>  CONFIG_DM_SPI_FLASH=y
> -CONFIG_SF_DEFAULT_SPEED=25000000
>  CONFIG_SPI_FLASH_SFDP_SUPPORT=y
>  CONFIG_SPI_FLASH_SOFT_RESET=y
>  CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
> @@ -96,5 +111,19 @@ CONFIG_CADENCE_QSPI=y
>  CONFIG_SYSRESET=y
>  CONFIG_SPL_SYSRESET=y
>  CONFIG_SYSRESET_TI_SCI=y
> +CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> +CONFIG_SPL_DM_USB_GADGET=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y

I believe the above got superseded by CONFIG_USB_DWC3_AM62 further below, not?

At least in my testing it always crashed as follows unless I removed CONFIG_USB_XHCI_DWC3:

=> usb start
starting USB...
Bus usb at 31000000: generic_phy_get_bulk : no phys property
Register 1000840 NbrPorts 1
Starting the controller
USB XHCI 1.10
Bus usb at 31100000: generic_phy_get_bulk : no phys property
Register 1000840 NbrPorts 1
Starting the controller
USB XHCI 1.10
Bus usb at 31100000: generic_phy_get_bulk : no phys property
Register 1000840 NbrPorts 1
Starting the controller
USB XHCI 1.10
scanning bus usb at 31000000 for devices... 1 USB Device(s) found
scanning bus usb at 31100000 for devices... XHCI timeout on event type 33... cannot recover.
BUG at drivers/usb/host/xhci-ring.c:496/xhci_wait_for_event()!
BUG!
resetting ...
System reset not supported on this platform
### ERROR ### Please RESET the board ###

> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GENERIC=y
> +CONFIG_SPL_USB_DWC3_GENERIC=y
> +CONFIG_SPL_USB_DWC3_AM62=y
> +CONFIG_USB_DWC3_AM62=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
> +CONFIG_USB_GADGET_DOWNLOAD=y
>  CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
> -CONFIG_OF_LIBFDT_OVERLAY=y
> diff --git a/configs/am62x_evm_r5_usbdfu_defconfig b/configs/am62x_evm_r5_usbdfu_defconfig
> new file mode 100644
> index 00000000000..00a0821b6df
> --- /dev/null
> +++ b/configs/am62x_evm_r5_usbdfu_defconfig
> @@ -0,0 +1,116 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_K3=y
> +CONFIG_SYS_MALLOC_LEN=0x08000000
> +CONFIG_SYS_MALLOC_F_LEN=0x9000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_NR_DRAM_BANKS=2
> +CONFIG_SOC_K3_AM625=y
> +CONFIG_TARGET_AM625_R5_EVM=y
> +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x43c3a7f0
> +CONFIG_ENV_SIZE=0x20000
> +CONFIG_DM_GPIO=y
> +CONFIG_DEFAULT_DEVICE_TREE="k3-am625-r5-sk"
> +CONFIG_SPL_TEXT_BASE=0x43c00000
> +CONFIG_DM_RESET=y
> +CONFIG_SPL_SERIAL=y
> +CONFIG_SPL_DRIVERS_MISC=y
> +CONFIG_SPL_STACK_R_ADDR=0x82000000
> +CONFIG_SPL_SYS_MALLOC_F_LEN=0x7000
> +CONFIG_SPL_SIZE_LIMIT=0x3A7F0
> +CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x3500
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
> +CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
> +CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
> +CONFIG_SPL_MAX_SIZE=0x3B000
> +CONFIG_SPL_PAD_TO=0x0
> +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> +CONFIG_SPL_BSS_START_ADDR=0x43c3b000
> +CONFIG_SPL_BSS_MAX_SIZE=0x3000
> +CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
> +CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_SEPARATE_BSS=y
> +CONFIG_SYS_SPL_MALLOC=y
> +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
> +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000
> +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000
> +CONFIG_SPL_EARLY_BSS=y
> +CONFIG_SPL_ENV_SUPPORT=y
> +CONFIG_SPL_DM_MAILBOX=y
> +CONFIG_SPL_DM_RESET=y
> +CONFIG_SPL_POWER_DOMAIN=y
> +CONFIG_SPL_RAM_SUPPORT=y
> +CONFIG_SPL_RAM_DEVICE=y
> +CONFIG_SPL_REMOTEPROC=y
> +CONFIG_SPL_USB_GADGET=y
> +CONFIG_SPL_DFU=y
> +CONFIG_SPL_YMODEM_SUPPORT=y
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_ASKENV=y
> +CONFIG_CMD_DFU=y
> +CONFIG_CMD_REMOTEPROC=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_SPL_MULTI_DTB_FIT=y
> +CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SPL_DM=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_SPL_OF_TRANSLATE=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_SPL_CLK_CCF=y
> +CONFIG_SPL_CLK_K3_PLL=y
> +CONFIG_SPL_CLK_K3=y
> +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
> +CONFIG_TI_SCI_PROTOCOL=y
> +CONFIG_DA8XX_GPIO=y
> +CONFIG_DM_MAILBOX=y
> +CONFIG_K3_SEC_PROXY=y
> +CONFIG_MISC=y
> +CONFIG_ESM_K3=y
> +CONFIG_PINCTRL=y
> +# CONFIG_PINCTRL_GENERIC is not set
> +CONFIG_SPL_PINCTRL=y
> +# CONFIG_SPL_PINCTRL_GENERIC is not set
> +CONFIG_PINCTRL_SINGLE=y
> +CONFIG_POWER_DOMAIN=y
> +CONFIG_TI_POWER_DOMAIN=y
> +CONFIG_K3_SYSTEM_CONTROLLER=y
> +CONFIG_REMOTEPROC_TI_K3_ARM64=y
> +CONFIG_RESET_TI_SCI=y
> +CONFIG_SPECIFY_CONSOLE_INDEX=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_SOC_DEVICE=y
> +CONFIG_SOC_DEVICE_TI_K3=y
> +CONFIG_SOC_TI=y
> +CONFIG_TIMER=y
> +CONFIG_SPL_TIMER=y
> +CONFIG_OMAP_TIMER=y
> +CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> +CONFIG_SPL_DM_USB_GADGET=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y

The same applies here.

> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GENERIC=y
> +CONFIG_SPL_USB_DWC3_GENERIC=y
> +CONFIG_SPL_USB_DWC3_AM62=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
> +CONFIG_USB_GADGET_DOWNLOAD=y
> +CONFIG_LIB_RATIONAL=y
> +CONFIG_SPL_LIB_RATIONAL=y

Cheers

Marcel