[PATCH 4/6] mtd: nand: zynq_nand: Change datatype of status and ecc_status to int

[Ashok Reddy Soma]

From: Algapally Santosh Sagar <santoshsagar.algapally at amd.com>

status and ecc_status are of unsigned type where they are compared for
negative value. This is pointed by below sparse warning. Change datatype
to int to fix this.
warning: comparison of unsigned expression in '< 0' is always false
[-Wtype-limits]

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally at amd.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at amd.com>
---

 drivers/mtd/nand/raw/zynq_nand.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/zynq_nand.c b/drivers/mtd/nand/raw/zynq_nand.c
index 9e3ee7412d..545fdd7b69 100644
--- a/drivers/mtd/nand/raw/zynq_nand.c
+++ b/drivers/mtd/nand/raw/zynq_nand.c
@@ -285,7 +285,7 @@ static int zynq_nand_init_nand_flash(struct mtd_info *mtd, int option)
 {
 	struct nand_chip *nand_chip = mtd_to_nand(mtd);
 	struct nand_drv *smc = nand_get_controller_data(nand_chip);
-	u32 status;
+	int status;
 
 	/* disable interrupts */
 	writel(ZYNQ_NAND_CLR_CONFIG, &smc->reg->cfr);
@@ -332,7 +332,7 @@ static int zynq_nand_calculate_hwecc(struct mtd_info *mtd, const u8 *data,
 	struct nand_drv *smc = nand_get_controller_data(nand_chip);
 	u32 ecc_value = 0;
 	u8 ecc_reg, ecc_byte;
-	u32 ecc_status;
+	int ecc_status;
 
 	/* Wait till the ECC operation is complete */
 	ecc_status = zynq_nand_waitfor_ecc_completion(mtd);
-- 
2.17.1