[PATCH] arm: mvebu: Clean up Thecus N2350 board DTS
Pali Rohár
pali at kernel.org
Mon Jun 12 20:49:51 CEST 2023
On Tuesday 06 June 2023 14:45:39 Tony Dinh wrote:
> - Update the Thecus N2350 DTS to conform with latest device-tree binding
> and styles.
> - Correct typo in mdio node.
>
> Signed-off-by: Tony Dinh <mibodhi at gmail.com>
Reviewed-by: Pali Rohár <pali at kernel.org>
> ---
>
> arch/arm/dts/armada-385-thecus-n2350.dts | 210 +++++++++++------------
> 1 file changed, 98 insertions(+), 112 deletions(-)
>
> diff --git a/arch/arm/dts/armada-385-thecus-n2350.dts b/arch/arm/dts/armada-385-thecus-n2350.dts
> index fc29c4d25a..2ad5158c0c 100644
> --- a/arch/arm/dts/armada-385-thecus-n2350.dts
> +++ b/arch/arm/dts/armada-385-thecus-n2350.dts
> @@ -23,7 +23,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory at 0 {
> device_type = "memory";
> reg = <0x00000000 0x40000000>; /* 1GB */
> };
> @@ -37,43 +37,43 @@
>
> };
>
> - usb3_0_phy: usb3_0_phy {
> + usb3_0_phy: usb-phy {
> compatible = "usb-nop-xceiv";
> vcc-supply = <&usb3_0_power>;
> + #phy-cells = <0>;
> };
>
> - usb3_1_phy: usb3_1_phy {
> + usb3_1_phy: usb-phy {
> compatible = "usb-nop-xceiv";
> vcc-supply = <&usb3_1_power>;
> + #phy-cells = <0>;
> };
>
> - gpio-keys {
> + keys {
> compatible = "gpio-keys";
> - #address-cells = <1>;
> - #size-cells = <0>;
> pinctrl-0 = <&pmx_power_button &pmx_copy_button &pmx_reset_button>;
> pinctrl-names = "default";
>
> - button at 1 {
> + button-1 {
> label = "Power Button";
> linux,code = <KEY_POWER>;
> gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
> };
>
> - button at 2 {
> + button-2 {
> label = "Copy Button";
> linux,code = <KEY_COPY>;
> gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
> };
>
> - button at 3 {
> + button-3 {
> label = "Reset Button";
> linux,code = <KEY_RESTART>;
> gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
> };
> };
>
> - gpio-leds {
> + leds {
> compatible = "gpio-leds";
> pinctrl-0 = <&pmx_sata1_white_led
> &pmx_sata1_red_led
> @@ -88,142 +88,132 @@
>
> pinctrl-names = "default";
>
> - white_sata1 {
> + led-1 {
> label = "n2350:white:sata1";
> gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "ide-disk1";
> };
>
> - red_sata1 {
> + led-2 {
> label = "n2350:red:sata1";
> gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
> };
>
> - white-sata2 {
> + led-3 {
> label = "n2350:white:sata2";
> gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
> };
>
> - red-sata2 {
> + led-4 {
> label = "n2350:red:sata2";
> gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
> };
>
> - white-sys {
> + led-5 {
> label = "n2350:white:sys";
> gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "default-on";
> };
>
> - red-sys {
> + led-6 {
> label = "n2350:red:sys";
> gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
> };
>
> - blue-pwr {
> + led-7 {
> label = "n2350:blue:pwr";
> gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
> };
>
> - red-pwr {
> + led-8 {
> label = "n2350:red:pwr";
> gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
> };
>
> - white-usb {
> + led-9 {
> label = "n2350:white:usb";
> gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
> };
>
> - red-usb {
> + led-10 {
> label = "n2350:red:usb";
> gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
> };
> };
>
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - usb3_0_power: regulator at 1 {
> - compatible = "regulator-fixed";
> - reg = <1>;
> - regulator-name = "USB3_0_Power";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - enable-active-high;
> - regulator-always-on;
> - regulator-boot-on;
> - gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
> - };
> -
> - usb3_1_power: regulator at 2 {
> - compatible = "regulator-fixed";
> - reg = <1>;
> - regulator-name = "USB3_1_Power";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - enable-active-high;
> - regulator-always-on;
> - regulator-boot-on;
> - gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
> - };
> + usb3_0_power: v5-vbus0 {
> + compatible = "regulator-fixed";
> + regulator-name = "USB3_0_Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + regulator-always-on;
> + regulator-boot-on;
> + gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
> + };
>
> - reg_sata0: regulator at 3 {
> - compatible = "regulator-fixed";
> - regulator-name = "pwr_en_sata0";
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - enable-active-high;
> - regulator-always-on;
> - regulator-boot-on;
> - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
> - };
> + usb3_1_power: v5-vbus1 {
> + compatible = "regulator-fixed";
> + regulator-name = "USB3_1_Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + regulator-always-on;
> + regulator-boot-on;
> + gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
> + };
>
> - reg_5v_sata0: v5-sata0 {
> - compatible = "regulator-fixed";
> - regulator-name = "v5.0-sata0";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <®_sata0>;
> - };
> + reg_sata0: pwr-sata0 {
> + compatible = "regulator-fixed";
> + regulator-name = "pwr_en_sata0";
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + enable-active-high;
> + regulator-always-on;
> + regulator-boot-on;
> + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
> + };
>
> - reg_12v_sata0: v12-sata0 {
> - compatible = "regulator-fixed";
> - regulator-name = "v12.0-sata0";
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - vin-supply = <®_sata0>;
> - };
> + reg_5v_sata0: v5-sata0 {
> + compatible = "regulator-fixed";
> + regulator-name = "v5.0-sata0";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <®_sata0>;
> + };
>
> - reg_sata1: regulator at 4 {
> - regulator-name = "pwr_en_sata1";
> - compatible = "regulator-fixed";
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - enable-active-high;
> - regulator-always-on;
> - regulator-boot-on;
> - gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> - };
> + reg_12v_sata0: v12-sata0 {
> + compatible = "regulator-fixed";
> + regulator-name = "v12.0-sata0";
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + vin-supply = <®_sata0>;
> + };
>
> - reg_5v_sata1: v5-sata1 {
> - compatible = "regulator-fixed";
> - regulator-name = "v5.0-sata1";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <®_sata1>;
> - };
> + reg_sata1: pwr-sata0 {
> + regulator-name = "pwr_en_sata1";
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + enable-active-high;
> + regulator-always-on;
> + regulator-boot-on;
> + gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> + };
>
> - reg_12v_sata1: v12-sata1 {
> - compatible = "regulator-fixed";
> - regulator-name = "v12.0-sata1";
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - vin-supply = <®_sata1>;
> - };
> + reg_5v_sata1: v5-sata1 {
> + compatible = "regulator-fixed";
> + regulator-name = "v5.0-sata1";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <®_sata1>;
> + };
>
> + reg_12v_sata1: v12-sata1 {
> + compatible = "regulator-fixed";
> + regulator-name = "v12.0-sata1";
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + vin-supply = <®_sata1>;
> };
>
> gpio-poweroff {
> @@ -267,7 +257,7 @@
> };
>
> &mdio {
> - phy0: ethernet-phy at 0 {
> + phy0: ethernet-phy at 1 {
> reg = <1>;
> };
> };
> @@ -301,18 +291,14 @@
>
> &pciec {
> status = "okay";
> - /*
> - * The two PCIe units are accessible through
> - * standard PCIe slots on the board.
> - */
> - pcie at 1,0 {
> - /* Port 0, Lane 0 */
> - status = "okay";
> - };
> - pcie at 2,0 {
> - /* Port 1, Lane 0 */
> - status = "okay";
> - };
> +};
> +
> +&pcie1 {
> + status = "okay";
> +};
> +
> +&pcie2 {
> + status = "okay";
> };
>
> &pinctrl {
> @@ -408,10 +394,10 @@
> status = "okay";
>
> /* spi: 4M Flash Macronix MX25L3205D */
> - spi-flash at 0 {
> + flash at 0 {
> #address-cells = <1>;
> #size-cells = <0>;
> - compatible = "macronix,mx25l3205d", "jedec,spi-nor";
> + compatible = "jedec,spi-nor";
> reg = <0>;
>
> spi-max-frequency = <108000000>;
> --
> 2.39.2
>
More information about the U-Boot
mailing list