[PATCH v5 03/11] riscv: dts: jh7110: Add ethernet device tree nodes
Yanhong Wang
yanhong.wang at starfivetech.com
Thu Jun 15 11:36:44 CEST 2023
Add ethernet device tree node to support StarFive ethernet driver for
the JH7110 RISC-V SoC.
Signed-off-by: Yanhong Wang <yanhong.wang at starfivetech.com>
---
.../dts/jh7110-starfive-visionfive-2.dtsi | 34 +++++++++
arch/riscv/dts/jh7110.dtsi | 69 +++++++++++++++++++
2 files changed, 103 insertions(+)
diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
index c6b6dfa940..3c1148ae2d 100644
--- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
@@ -17,6 +17,8 @@
i2c2 = &i2c2;
i2c5 = &i2c5;
i2c6 = &i2c6;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
};
chosen {
@@ -317,3 +319,35 @@
assigned-clock-parents = <&osc>;
assigned-clock-rates = <0>;
};
+
+&gmac0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+ };
+};
+
+&gmac1 {
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy1: ethernet-phy at 1 {
+ reg = <0>;
+ };
+ };
+};
diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi
index bd60879615..58e332e9d7 100644
--- a/arch/riscv/dts/jh7110.dtsi
+++ b/arch/riscv/dts/jh7110.dtsi
@@ -235,6 +235,13 @@
#clock-cells = <0>;
};
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,lpi_en;
+ snps,wr_osr_lmt = <4>;
+ snps,rd_osr_lmt = <4>;
+ snps,blen = <256 128 64 32 0 0 0>;
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&plic>;
@@ -539,6 +546,68 @@
status = "disabled";
};
+ gmac0: ethernet at 16030000 {
+ compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20";
+ reg = <0x0 0x16030000 0x0 0x10000>;
+ clocks = <&aoncrg JH7110_AONCLK_GMAC0_AXI>,
+ <&aoncrg JH7110_AONCLK_GMAC0_AHB>,
+ <&syscrg JH7110_SYSCLK_GMAC0_PTP>,
+ <&aoncrg JH7110_AONCLK_GMAC0_TX_INV>,
+ <&syscrg JH7110_SYSCLK_GMAC0_GTXC>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref",
+ "tx", "gtx";
+ resets = <&aoncrg JH7110_AONRST_GMAC0_AXI>,
+ <&aoncrg JH7110_AONRST_GMAC0_AHB>;
+ reset-names = "stmmaceth", "ahb";
+ interrupts = <7>, <6>, <5>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ snps,multicast-filter-bins = <64>;
+ snps,perfect-filter-entries = <8>;
+ rx-fifo-depth = <2048>;
+ tx-fifo-depth = <2048>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,tso;
+ snps,en-tx-lpi-clockgating;
+ snps,txpbl = <16>;
+ snps,rxpbl = <16>;
+ starfive,syscon = <&aon_syscon 0xc 0x12>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet at 16040000 {
+ compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20";
+ reg = <0x0 0x16040000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_GMAC1_AXI>,
+ <&syscrg JH7110_SYSCLK_GMAC1_AHB>,
+ <&syscrg JH7110_SYSCLK_GMAC1_PTP>,
+ <&syscrg JH7110_SYSCLK_GMAC1_TX_INV>,
+ <&syscrg JH7110_SYSCLK_GMAC1_GTXC>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref",
+ "tx", "gtx";
+ resets = <&syscrg JH7110_SYSRST_GMAC1_AXI>,
+ <&syscrg JH7110_SYSRST_GMAC1_AHB>;
+ reset-names = "stmmaceth", "ahb";
+ interrupts = <78>, <77>, <76>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ snps,multicast-filter-bins = <64>;
+ snps,perfect-filter-entries = <8>;
+ rx-fifo-depth = <2048>;
+ tx-fifo-depth = <2048>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,tso;
+ snps,en-tx-lpi-clockgating;
+ snps,txpbl = <16>;
+ snps,rxpbl = <16>;
+ starfive,syscon = <&sys_syscon 0x90 0x2>;
+ status = "disabled";
+ };
+
aoncrg: clock-controller at 17000000 {
compatible = "starfive,jh7110-aoncrg";
reg = <0x0 0x17000000 0x0 0x10000>;
--
2.17.1
More information about the U-Boot
mailing list