[PATCH V4 3/9] board: ti: am62x: evm: Update function calls for splash screen

[Nikhil M Jain]

Use spl_dcache_enable, in place of setup_dram, arch_reserve_mmu to set
up pagetable, initialise DRAM and enable Dcache, in place of having
separate calls for each.

Check for CONFIG_SPL_VIDEO in place of CONFIG_SPL_VIDEO_TIDSS to prevent
any build failure in case video config is not defined and video related
functions are called.

Check for CONFIG_SPL_SPLASH_SCREEN and CONFIG_SPL_BMP before calling
splash_display to avoid compilation failure.

Signed-off-by: Nikhil M Jain <n-jain1 at ti.com>
---
V4:
- Update commit message as per comments.

V3:
- No change.

V2:
- Use CONFIG_SPL_VIDEO in place of CONFIG_SPL_VIDEO_TIDSS to reserve
  video and  call splash at SPL.
- Check SPL_SPLASH_SCREEN and SPL_BMP before calling splash display.

 arch/arm/mach-k3/am625_init.c |  1 +
 board/ti/am62x/evm.c          | 41 +++++++++++++----------------------
 2 files changed, 16 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-k3/am625_init.c b/arch/arm/mach-k3/am625_init.c
index 787fe92295..0e5d44269e 100644
--- a/arch/arm/mach-k3/am625_init.c
+++ b/arch/arm/mach-k3/am625_init.c
@@ -214,6 +214,7 @@ void board_init_f(ulong dummy)
 	if (ret)
 		panic("DRAM init failed: %d\n", ret);
 #endif
+	spl_enable_dcache();
 }
 
 u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
diff --git a/board/ti/am62x/evm.c b/board/ti/am62x/evm.c
index 34830f445f..d3c1786cd9 100644
--- a/board/ti/am62x/evm.c
+++ b/board/ti/am62x/evm.c
@@ -59,42 +59,31 @@ int dram_init_banksize(void)
 }
 
 #if defined(CONFIG_SPL_BUILD)
-#ifdef CONFIG_SPL_VIDEO_TIDSS
-static int setup_dram(void)
-{
-	dram_init();
-	dram_init_banksize();
-	gd->ram_base = CFG_SYS_SDRAM_BASE;
-	gd->ram_top = gd->ram_base + gd->ram_size;
-	gd->relocaddr = gd->ram_top;
-	return 0;
-}
-
 static int video_setup(void)
 {
-	ulong addr;
-	int ret;
-	addr = gd->relocaddr;
+	if (CONFIG_IS_ENABLED(VIDEO)) {
+		ulong addr;
+		int ret;
+
+		addr = gd->relocaddr;
+		ret = video_reserve(&addr);
+		if (ret)
+			return ret;
+		debug("Reserving %luk for video at: %08lx\n",
+		      ((unsigned long)gd->relocaddr - addr) >> 10, addr);
+		gd->relocaddr = addr;
+	}
 
-	ret = video_reserve(&addr);
-	if (ret)
-		return ret;
-	debug("Reserving %luk for video at: %08lx\n",
-	      ((unsigned long)gd->relocaddr - addr) >> 10, addr);
-	gd->relocaddr = addr;
 	return 0;
 }
 
-#endif
 void spl_board_init(void)
 {
-#if defined(CONFIG_SPL_VIDEO_TIDSS)
-	setup_dram();
-	arch_reserve_mmu();
 	video_setup();
 	enable_caches();
-	splash_display();
-#endif
+	if (IS_ENABLED(CONFIG_SPL_SPLASH_SCREEN) && IS_ENABLED(CONFIG_SPL_BMP))
+		splash_display();
+
 }
 
 #if defined(CONFIG_K3_AM64_DDRSS)
-- 
2.34.1