[PATCH 4/7] tools: mkeficapsule: Add support for parsing capsule params from config file
Sughosh Ganu
sughosh.ganu at linaro.org
Mon Jun 19 09:27:12 CEST 2023
hi Malte,
On Fri, 16 Jun 2023 at 18:42, Schmidt, Malte
<malte.schmidt-oss at weidmueller.com> wrote:
>
> Hi sughosh,
>
> Am 16.06.2023 um 08:35 schrieb Sughosh Ganu:
>
> On Fri, 16 Jun 2023 at 10:48, Takahiro Akashi
> <takahiro.akashi at linaro.org> wrote:
>
> On Fri, Jun 16, 2023 at 10:37:01AM +0530, Sughosh Ganu wrote:
>
> hi Takahiro,
>
> On Fri, 16 Jun 2023 at 10:16, Takahiro Akashi
> <takahiro.akashi at linaro.org> wrote:
>
> Hi Sughosh,
>
> On Fri, Jun 16, 2023 at 09:56:33AM +0530, Sughosh Ganu wrote:
>
> On Thu, 15 Jun 2023 at 11:19, Takahiro Akashi
> <takahiro.akashi at linaro.org> wrote:
>
> On Thu, Jun 15, 2023 at 10:09:06AM +0530, Sughosh Ganu wrote:
>
> On Wed, 14 Jun 2023 at 11:23, Takahiro Akashi
> <takahiro.akashi at linaro.org> wrote:
>
> On Wed, Jun 14, 2023 at 10:56:23AM +0530, Sughosh Ganu wrote:
>
> hi Takahiro,
>
> On Wed, 14 Jun 2023 at 09:09, Takahiro Akashi
> <takahiro.akashi at linaro.org> wrote:
>
> Hi Sughosh,
>
> I think this is a good extension to mkeficapsule, but
>
> On Tue, Jun 13, 2023 at 04:08:03PM +0530, Sughosh Ganu wrote:
>
> Add support for specifying the parameters needed for capsule
> generation through a config file, instead of passing them through
> command-line. Parameters for more than a single capsule file can be
> specified, resulting in generation of multiple capsules through a
> single invocation of the command.
>
> This path is to be used for generating capsules through a make target,
> with the parameters being parsed from the config file.
>
> Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
> ---
> tools/Kconfig | 9 +
> tools/Makefile | 1 +
> tools/eficapsule.h | 110 ++++++++++++
> tools/mkeficapsule.c | 106 +++++++-----
> tools/mkeficapsule_parse.c | 345 +++++++++++++++++++++++++++++++++++++
> 5 files changed, 531 insertions(+), 40 deletions(-)
> create mode 100644 tools/mkeficapsule_parse.c
>
<snip>
> diff --git a/tools/mkeficapsule_parse.c b/tools/mkeficapsule_parse.c
> new file mode 100644
> index 0000000000..ef4f3f6705
> --- /dev/null
> +++ b/tools/mkeficapsule_parse.c
> @@ -0,0 +1,345 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2023 Linaro Limited
> + */
> +
> +/*
> + * The code in this file adds parsing ability to the mkeficapsule
> + * tool. This allows specifying parameters needed to build the capsule
> + * through the config file instead of specifying them on the command-line.
> + * Parameters can be specified for more than one payload, generating the
> + * corresponding capsule files.
> + *
> + * The parameters are specified in a "key:value" pair. All the parameters
> + * that are currently supported by the mkeficapsule tool can be specified
> + * in the config file.
> + *
> + * The example below shows four payloads. The first payload is an example
> + * of generating a signed capsule. The second payload is an example of
> + * generating an unsigned capsule. The third payload is an accept empty
> + * capsule, while the fourth payload is the revert empty capsule, used
> + * for the multi-bank firmware update feature.
> + *
> + * This functionality can be easily extended to generate a single capsule
> + * comprising multiple payloads.
> +
> + {
> + image-guid: 02f4d760-cfd5-43bd-8e2d-a42acb33c660
> + hardware-instance: 0
> + monotonic-count: 1
> + payload: u-boot.bin
> + image-index: 1
> + private-key: /path/to/priv/key
> + pub-key-cert: /path/to/pub/key
> + capsule: u-boot.capsule
> + }
> + {
> + image-guid: 4ce292da-1dd8-428d-a1c2-77743ef8b96e
> + hardware-instance: 0
> + payload: u-boot.itb
> + image-index: 2
> + oemflags: 0x8000
> + capsule: fit.capsule
> + }
> + {
> + capsule-type: accept
> + image-guid: 4ce292da-1dd8-428d-a1c2-77743ef8b96e
> + capsule: accept.capsule
> + }
> + {
> + capsule-type: revert
> + capsule: revert.capsule
> + }
> +*/
> +
>
> If i understand it correctly the EDK2 GenerateCapsule tool allows for multiple
> payloads inside one capsule by specifying a list of payloads in the JSON-file.
> I think something similar should be done here to support multiple payloads
> inside one capsule. What about something like this:
>
> {
>
> content: [{
> image-guid: 02f4d760-cfd5-43bd-8e2d-a42acb33c660
> hardware-instance: 0
> monotonic-count: 1
> payload: u-boot.bin
> image-index: 1
> },{
>
> image-guid: 02f4d760-cfd5-43bd-8e2d-a42acb33c660
> hardware-instance: 1
> monotonic-count: 1
> payload: boot.bin
> image-index: 2
> }],
>
> private-key: /path/to/priv/key
> pub-key-cert: /path/to/pub/key
> capsule: u-boot.capsule
>
> }
>
> ?
I am aware of these additional brackets and the "Payloads" keyword
that is used in the EDK2 json file. Adding this should not be a big
effort. However, the reason I did not add this is that I did not see
any value in adding this. I believe the EDK2 json file also is used
for providing information about additional files, like optional driver
images. But we don't support that with the u-boot tool. So will we be
adding any value by putting these additional brackets.
The other question is, in case of a single capsule file consisting of
multiple payloads, how do we pass the name of the output capsule file.
I see two options, one is having a field like "capsule" outside of all
the payloads. The other is passing this through the command line. In
any case, changes for extending this for supporting a single capsule
should be sent along with your change of adding support for a single
capsule file. I can work on adding this, but it would be good to get
this in as part of your patches.
-sughosh
>
> Best Regards
> Malte
>
> +#include <ctype.h>
> +#include <limits.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +
> +#include <uuid/uuid.h>
> +
> +#include "eficapsule.h"
> +
> +#define PARAMS_START "{"
> +#define PARAMS_END "}"
> +
> +#define PSTART 2
> +#define PEND 3
> +
> +#define MALLOC_FAIL_STR "Unable to allocate memory\n"
> +
> +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
> +
> +const char *capsule_params[] = {
> + "image-guid", "image-index", "private-key",
> + "pub-key-cert", "payload", "capsule",
> + "hardware-instance", "monotonic-count",
> + "capsule-type", "oemflags" };
> +
> +static unsigned char params_start;
> +static unsigned char params_end;
> +
> +static void print_and_exit(const char *str)
> +{
> + fprintf(stderr, "%s", str);
> + exit(EXIT_FAILURE);
> +}
> +
> +static int param_delim_checks(char *line, unsigned char *token)
> +{
> + if (!strcmp(line, PARAMS_START)) {
> + if (params_start || !params_end) {
> + fprintf(stderr, "Earlier params processing still in progress. ");
> + fprintf(stderr, "Can't start processing a new params.\n");
> + exit(EXIT_FAILURE);
> + } else {
> + params_start = 1;
> + params_end = 0;
> + *token = PSTART;
> + return 1;
> + }
> + } else if (!strcmp(line, PARAMS_END)) {
> + if (!params_start) {
> + fprintf(stderr, "Cannot put end braces without start braces. ");
> + fprintf(stderr, "Please check the documentation for reference config file syntax\n");
> + exit(EXIT_FAILURE);
> + } else {
> + params_start = 0;
> + params_end = 1;
> + *token = PEND;
> + return 1;
> + }
> + } else if (!params_start) {
> + fprintf(stderr, "Params should be passed within braces. ");
> + fprintf(stderr, "Please check the documentation for reference config file syntax\n");
> + exit(EXIT_FAILURE);
> + }
> +
> + return 0;
> +}
> +
> +static void add_guid(efi_guid_t **guid_param, char *guid)
> +{
> + unsigned char uuid_buf[16];
> +
> + *guid_param = malloc(sizeof(efi_guid_t));
> + if (!*guid_param)
> + print_and_exit(MALLOC_FAIL_STR);
> +
> + if (uuid_parse(guid, uuid_buf))
> + print_and_exit("Wrong guid format\n");
> +
> + convert_uuid_to_guid(uuid_buf);
> + memcpy(*guid_param, uuid_buf, sizeof(efi_guid_t));
> +}
> +
> +static void add_string(char **dst, char *val)
> +{
> + *dst = strdup(val);
> + if (!*dst)
> + print_and_exit(MALLOC_FAIL_STR);
> +}
> +
> +static void match_and_populate_param(char *key, char *val,
> + struct efi_capsule_params *param)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(capsule_params); i++) {
> + if (!strcmp(key, capsule_params[i])) {
> + switch (i) {
> + case 0:
> + add_guid(¶m->image_guid, val);
> + return;
> + case 1:
> + param->image_index = strtoul(val, NULL, 0);
> + if (param->image_index == ULONG_MAX)
> + print_and_exit("Enter a valid value of index bewtween 1-255");
> + return;
> + case 2:
> + add_string(¶m->privkey_file, val);
> + return;
> + case 3:
> + add_string(¶m->cert_file, val);
> + return;
> + case 4:
> + add_string(¶m->input_file, val);
> + return;
> + case 5:
> + add_string(¶m->capsule_file, val);
> + return;
> + case 6:
> + param->hardware_instance = strtoul(val, NULL, 0);
> + if (param->hardware_instance == ULONG_MAX)
> + print_and_exit("Enter a valid hardware instance value");
> + return;
> + case 7:
> + param->monotonic_count = strtoull(val, NULL, 0);
> + if (param->monotonic_count == ULLONG_MAX)
> + print_and_exit("Enter a valid monotonic count value");
> + return;
> + case 8:
> + if (!strcmp(val, "normal"))
> + param->capsule = CAPSULE_NORMAL_BLOB;
> + else if (!strcmp(val, "accept"))
> + param->capsule = CAPSULE_ACCEPT;
> + else if (!strcmp(val, "revert"))
> + param->capsule = CAPSULE_REVERT;
> + else
> + print_and_exit("Invalid type of capsule");
> +
> + return;
> + case 9:
> + param->oemflags = strtoul(val, NULL, 0);
> + if (param->oemflags > 0xffff)
> + print_and_exit("OemFlags must be between 0x0 and 0xffff\n");
> + return;
> + }
> + }
> + }
> +
> + fprintf(stderr, "Undefined param %s specified. ", key);
> + fprintf(stderr, "Please check the documentation for reference config file syntax\n");
> + exit(EXIT_FAILURE);
> +}
> +
> +static int get_capsule_params(char *line, struct efi_capsule_params *params)
> +{
> + char *key = NULL;
> + char *val = NULL;
> + unsigned char token;
> +
> + if (param_delim_checks(line, &token))
> + return token;
> +
> + key = strtok(line, ":");
> + if (key)
> + val = strtok(NULL, "\0");
> + else
> + print_and_exit("Expect the params in a key:value pair\n");
> +
> + match_and_populate_param(key, val, params);
> +
> + return 0;
> +}
> +
> +static char *skip_whitespace(char *line)
> +{
> + char *ptr, *newline;
> +
> + ptr = malloc(strlen(line) + 1);
> + if (!ptr)
> + print_and_exit(MALLOC_FAIL_STR);
> +
> + for (newline = ptr; *line; line++)
> + if (!isblank(*line))
> + *ptr++ = *line;
> + *ptr = '\0';
> + return newline;
> +}
> +
> +static int parse_capsule_payload_params(FILE *fp, struct efi_capsule_params *params)
> +{
> + char *line = NULL;
> + char *newline;
> + size_t n = 0;
> + ssize_t len;
> +
> + while ((len = getline(&line, &n, fp)) != -1) {
> + if (len == 1 && line[len - 1] == '\n')
> + continue;
> +
> + line[len - 1] = '\0';
> +
> + newline = skip_whitespace(line);
> +
> + if (newline[0] == '#')
> + continue;
> +
> + if (get_capsule_params(newline, params) == PEND)
> + return 0;
> + }
> +
> + if (errno == EINVAL || errno == ENOMEM) {
> + fprintf(stderr, "getline() returned an error %s reading the line\n",
> + strerror(errno));
> + exit(EXIT_FAILURE);
> + } else if (params_start == 1 || params_end == 0) {
> + fprintf(stderr, "Params should be passed within braces. ");
> + fprintf(stderr, "Please check the documentation for reference config file syntax\n");
> + exit(EXIT_FAILURE);
> + } else {
> + return -1;
> + }
> +}
> +
> +static void params_dependency_check(struct efi_capsule_params *params)
> +{
> + /* check necessary parameters */
> + if ((params->capsule == CAPSULE_NORMAL_BLOB &&
> + ((!params->input_file || !params->capsule_file ||
> + !params->image_guid) ||
> + ((params->privkey_file && !params->cert_file) ||
> + (!params->privkey_file && params->cert_file)))) ||
> + (params->capsule != CAPSULE_NORMAL_BLOB &&
> + (!params->capsule_file ||
> + (params->capsule == CAPSULE_ACCEPT && !params->image_guid) ||
> + (params->capsule == CAPSULE_REVERT && params->image_guid)))) {
> + print_usage();
> + exit(EXIT_FAILURE);
> + }
> +}
> +
> +static void generate_capsule(struct efi_capsule_params *params)
> +{
> + if (params->capsule != CAPSULE_NORMAL_BLOB) {
> + if (create_empty_capsule(params->capsule_file,
> + params->image_guid,
> + params->capsule ==
> + CAPSULE_ACCEPT) < 0)
> + print_and_exit("Creating empty capsule failed\n");
> + } else if (create_fwbin(params->capsule_file, params->input_file,
> + params->image_guid, params->image_index,
> + params->hardware_instance,
> + params->monotonic_count,
> + params->privkey_file,
> + params->cert_file,
> + (uint16_t)params->oemflags) < 0) {
> + print_and_exit("Creating firmware capsule failed\n");
> + }
> +}
> +
> +/**
> + * capsule_with_cfg_file() - Generate capsule from config file
> + * @cfg_file: Path to the config file
> + *
> + * Parse the capsule parameters from the config file and use the
> + * parameters for generating one or more capsules.
> + *
> + * Return: None
> + *
> + */
> +void capsule_with_cfg_file(const char *cfg_file)
> +{
> + FILE *fp;
> + struct efi_capsule_params params = { 0 };
> +
> + fp = fopen(cfg_file, "r");
> + if (!fp) {
> + fprintf(stderr, "Unable to open the capsule config file %s\n",
> + cfg_file);
> + exit(EXIT_FAILURE);
> + }
> +
> + params_start = 0;
> + params_end = 1;
> +
> + while (parse_capsule_payload_params(fp, ¶ms) != -1) {
> + params_dependency_check(¶ms);
> + generate_capsule(¶ms);
> +
> + memset(¶ms, 0, sizeof(struct efi_capsule_params));
> + }
> +}
> --
> 2.34.1
>
>
More information about the U-Boot
mailing list