[PATCH v2 3/7] sunxi: Kconfig: rework PHY_USB_SUN4I selection

[Andre Przywara]

On Sun, 18 Jun 2023 21:15:16 -0600
Sam Edwards <cfsworks at gmail.com> wrote:

Hi Sam,

> On 6/11/23 17:32, Andre Przywara wrote:
> > At the moment we use "select" in each Allwinner SoC's Kconfig section to
> > include the USB PHY driver in the build. This means it cannot be disabled
> > via Kconfig, although USB is not really a strictly required core
> > functionality, and a particular board might not even include USB ports.
> > 
> > Rework the Kconfig part by removing the "select" lines for each SoC's
> > section, and instead letting it default to "y" in the PHY driver section
> > itself. We use "depends on !" to exclude the few SoCs we don't support
> > (yet). The Allwinner V3s does not enable USB (PHY) support at the moment,
> > even though it should work: let the PHY default to "n" to keep the
> > current behaviour.
> > 
> > Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> > Reviewed-by: Jernej Skrabec <jernej.skrabec at gmail.com>
> > ---
> >   arch/arm/mach-sunxi/Kconfig   | 11 -----------
> >   drivers/phy/allwinner/Kconfig |  6 +++++-
> >   2 files changed, 5 insertions(+), 12 deletions(-)
> > 
> > diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> > index 6dcbb096f74..e0b1bde35a9 100644
> > --- a/arch/arm/mach-sunxi/Kconfig
> > +++ b/arch/arm/mach-sunxi/Kconfig
> > @@ -207,7 +207,6 @@ endif
> >   
> >   config MACH_SUNXI_H3_H5
> >   	bool
> > -	select PHY_SUN4I_USB
> >   	select SUNXI_DE2
> >   	select SUNXI_DRAM_DW
> >   	select SUNXI_DRAM_DW_32BIT
> > @@ -236,7 +235,6 @@ config MACH_SUNIV
> >   config MACH_SUN4I
> >   	bool "sun4i (Allwinner A10)"
> >   	select CPU_V7A
> > -	select PHY_SUN4I_USB
> >   	select DRAM_SUN4I
> >   	select SUNXI_GEN_SUN4I
> >   	select SUPPORT_SPL
> > @@ -247,7 +245,6 @@ config MACH_SUN5I
> >   	bool "sun5i (Allwinner A13)"
> >   	select CPU_V7A
> >   	select DRAM_SUN4I
> > -	select PHY_SUN4I_USB
> >   	select SUNXI_GEN_SUN4I
> >   	select SUPPORT_SPL
> >   	imply SPL_SYS_I2C_LEGACY
> > @@ -261,7 +258,6 @@ config MACH_SUN6I
> >   	select ARCH_SUPPORT_PSCI
> >   	select SPL_ARMV7_SET_CORTEX_SMPEN
> >   	select DRAM_SUN6I
> > -	select PHY_SUN4I_USB
> >   	select SPL_I2C
> >   	select SUN6I_PRCM
> >   	select SUNXI_GEN_SUN6I
> > @@ -277,7 +273,6 @@ config MACH_SUN7I
> >   	select ARCH_SUPPORT_PSCI
> >   	select SPL_ARMV7_SET_CORTEX_SMPEN
> >   	select DRAM_SUN4I
> > -	select PHY_SUN4I_USB
> >   	select SUNXI_GEN_SUN4I
> >   	select SUPPORT_SPL
> >   	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
> > @@ -291,7 +286,6 @@ config MACH_SUN8I_A23
> >   	select CPU_V7_HAS_VIRT
> >   	select ARCH_SUPPORT_PSCI
> >   	select DRAM_SUN8I_A23
> > -	select PHY_SUN4I_USB
> >   	select SPL_I2C
> >   	select SUNXI_GEN_SUN6I
> >   	select SUPPORT_SPL
> > @@ -305,7 +299,6 @@ config MACH_SUN8I_A33
> >   	select CPU_V7_HAS_VIRT
> >   	select ARCH_SUPPORT_PSCI
> >   	select DRAM_SUN8I_A33
> > -	select PHY_SUN4I_USB
> >   	select SPL_I2C
> >   	select SUNXI_GEN_SUN6I
> >   	select SUPPORT_SPL
> > @@ -316,7 +309,6 @@ config MACH_SUN8I_A83T
> >   	bool "sun8i (Allwinner A83T)"
> >   	select CPU_V7A
> >   	select DRAM_SUN8I_A83T
> > -	select PHY_SUN4I_USB
> >   	select SPL_I2C
> >   	select SUNXI_GEN_SUN6I
> >   	select MMC_SUNXI_HAS_NEW_MODE
> > @@ -344,7 +336,6 @@ config MACH_SUN8I_R40
> >   	select SUPPORT_SPL
> >   	select SUNXI_DRAM_DW
> >   	select SUNXI_DRAM_DW_32BIT
> > -	select PHY_SUN4I_USB
> >   	imply SPL_SYS_I2C_LEGACY
> >   
> >   config MACH_SUN8I_V3S
> > @@ -372,7 +363,6 @@ config MACH_SUN9I
> >   config MACH_SUN50I
> >   	bool "sun50i (Allwinner A64)"
> >   	select ARM64
> > -	select PHY_SUN4I_USB
> >   	select SUN6I_PRCM
> >   	select SUNXI_DE2
> >   	select SUNXI_GEN_SUN6I
> > @@ -395,7 +385,6 @@ config MACH_SUN50I_H5
> >   config MACH_SUN50I_H6
> >   	bool "sun50i (Allwinner H6)"
> >   	select ARM64
> > -	select PHY_SUN4I_USB
> >   	select DRAM_SUN50I_H6
> >   	select SUN50I_GEN_H6
> >   
> > diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
> > index f8f1e99c4f5..565b4617b01 100644
> > --- a/drivers/phy/allwinner/Kconfig
> > +++ b/drivers/phy/allwinner/Kconfig
> > @@ -4,6 +4,10 @@
> >   config PHY_SUN4I_USB
> >   	bool "Allwinner Sun4I USB PHY driver"
> >   	depends on ARCH_SUNXI
> > +	depends on !MACH_SUN9I
> > +	depends on !MACH_SUN50I_H616
> > +	default n if MACH_SUN8I_V3S
> > +	default y
> >   	select DM_REGULATOR
> >   	select PHY
> >   	help
> > @@ -11,7 +15,7 @@ config PHY_SUN4I_USB
> >   	  sunxi SoCs.
> >   
> >   	  This driver controls the entire USB PHY block, both the USB OTG
> > -	  parts, as well as the 2 regular USB 2 host PHYs.
> > +	  parts, as well as the regular USB HCI host PHYs.
> >   
> >   config INITIAL_USB_SCAN_DELAY
> >   	int "Delay initial USB scan by x ms to allow builtin devices to init"  
> 
> This does result in PHY_USB_SUN4I being enabled by default, so I guess:
> Tested-by: Sam Edwards <CFSworks at gmail.com>

Thanks for that!

> However, it's now possible to (attempt to) build the mUSB driver with 
> PHY_USB_SUN4I switched off, resulting in link errors. Should the proper 
> "depends on" be added under USB_MUSB_SUNXI?

Ah, indeed, good point. We call some Allwinner PHY functions directly
from the MUSB driver. This should probably replaced by some DM
abstraction, though this looks more complicated.

In any case we rely on the PHY, so I will just need to figure out if this
is a "select" or "depends on" case.

Cheers,
Andre