[PATCH v1 3/4] net: rtl8169: Add one more device ID

[Minda Chen]

Add the NIC device ID and adjust the PCI bar regions.

Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
---
 drivers/net/rtl8169.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 34e4cff1e9..963702777c 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -353,10 +353,11 @@ static const unsigned int rtl8169_rx_config =
     (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
 
 static struct pci_device_id supported[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8125) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8161) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8125) },
 	{}
 };
 
@@ -1051,8 +1052,9 @@ static int rtl8169_eth_probe(struct udevice *dev)
 	int ret;
 
 	switch (pplat->device) {
-	case 0x8168:
 	case 0x8125:
+	case 0x8161:
+	case 0x8168:
 		region = 2;
 		break;
 	default:
-- 
2.17.1