[PATCH next v3 2/2] rockchip: puma: pass platform parameter to TF-A

[Quentin Schulz]

From: Quentin Schulz <quentin.schulz at theobroma-systems.com>

Puma supports upstream TF-A and is configured to output serial on UART0
instead of the default UART2. Since U-Boot is properly configured to
output on UART0, let's pass the DT to TF-A so there is no need for a
custom TF-A to make the latter output to UART0 too.

Cc: Quentin Schulz <foss+uboot at 0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
---
 configs/puma-rk3399_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index 697f5eccef5..b632fa3dcf3 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -39,7 +39,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
 CONFIG_TPL=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y

-- 
2.41.0