[PATCH] arm64: versal-net: spi: Update boot sequence dynamically
Michal Simek
michal.simek at amd.com
Fri Jun 23 14:55:05 CEST 2023
On 6/14/23 11:30, Ashok Reddy Soma wrote:
> Currently xspi0 is used for all spi boot modes, it means it will use "sf
> probe 0 0 0" for all spi's irrespective of which node it is wired.
>
> Get boot sequence from dev_seq() and update boot command for xspi
> dynamically.
>
> As a result bootcmd for spi is updated as below when two instances of spi
> are present in DT node.
> bootcmd_xspi0=devnum_xspi=0; run xspi_boot
> bootcmd_xspi1=devnum_xspi=1; run xspi_boot
>
> xspi_boot=sf probe $devnum_xspi:0 0 0 && sf read $scriptaddr
> $script_offset_f $script_size_f && echo XSPI: Trying to boot script at
> ${scriptaddr} && source ${scriptaddr}; echo XSPI: SCRIPT FAILED:
> continuing...;
>
> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at amd.com>
> ---
>
> board/xilinx/versal-net/board.c | 24 +++++++++++++++++++++---
> include/configs/xilinx_versal_net.h | 19 ++++++++++++-------
> 2 files changed, 33 insertions(+), 10 deletions(-)
>
> diff --git a/board/xilinx/versal-net/board.c b/board/xilinx/versal-net/board.c
> index 6595d6f3e8..00b01d9641 100644
> --- a/board/xilinx/versal-net/board.c
> +++ b/board/xilinx/versal-net/board.c
> @@ -214,15 +214,33 @@ int board_late_init(void)
> break;
> case QSPI_MODE_24BIT:
> puts("QSPI_MODE_24\n");
> - mode = "xspi0";
> + if (uclass_get_device_by_name(UCLASS_SPI,
> + "spi at f1030000", &dev)) {
> + puts("Boot from QSPI but without QSPI enabled!\n");
> + return -1;
> + }
> + mode = "xspi";
> + bootseq = dev_seq(dev);
> break;
> case QSPI_MODE_32BIT:
> puts("QSPI_MODE_32\n");
> - mode = "xspi0";
> + if (uclass_get_device_by_name(UCLASS_SPI,
> + "spi at f1030000", &dev)) {
> + puts("Boot from QSPI but without QSPI enabled!\n");
> + return -1;
> + }
> + mode = "xspi";
> + bootseq = dev_seq(dev);
> break;
> case OSPI_MODE:
> puts("OSPI_MODE\n");
> - mode = "xspi0";
> + if (uclass_get_device_by_name(UCLASS_SPI,
> + "spi at f1010000", &dev)) {
> + puts("Boot from OSPI but without OSPI enabled!\n");
> + return -1;
> + }
> + mode = "xspi";
> + bootseq = dev_seq(dev);
> break;
> case EMMC_MODE:
> puts("EMMC_MODE\n");
> diff --git a/include/configs/xilinx_versal_net.h b/include/configs/xilinx_versal_net.h
> index 424ead038e..613cce46f9 100644
> --- a/include/configs/xilinx_versal_net.h
> +++ b/include/configs/xilinx_versal_net.h
> @@ -76,20 +76,24 @@
> # define BOOT_TARGET_DEVICES_DHCP(func)
> #endif
>
> -#if defined(CONFIG_ZYNQMP_GQSPI) || defined(CONFIG_CADENCE_OSPI_VERSAL_NET)
> -# define BOOT_TARGET_DEVICES_XSPI(func) func(XSPI, xspi, 0)
> +#if defined(CONFIG_ZYNQMP_GQSPI) || defined(CONFIG_CADENCE_OSPI_VERSAL)
> +# define BOOT_TARGET_DEVICES_XSPI(func) func(XSPI, xspi, 0) func(XSPI, xspi, 1)
> +# define BOOTENV_DEV_SHARED_XSPI \
> + "xspi_boot=sf probe $devnum_xspi:0 0 0 && " \
> + "sf read $scriptaddr $script_offset_f $script_size_f && " \
> + "echo XSPI: Trying to boot script at ${scriptaddr} && " \
> + "source ${scriptaddr}; echo XSPI: SCRIPT FAILED: continuing...;\0"
> #else
> # define BOOT_TARGET_DEVICES_XSPI(func)
> +# define BOOTENV_DEV_SHARED_XSPI
> #endif
>
> #define BOOTENV_DEV_XSPI(devtypeu, devtypel, instance) \
> - "bootcmd_xspi0=sf probe 0 0 0 && " \
> - "sf read $scriptaddr $script_offset_f $script_size_f && " \
> - "echo XSPI: Trying to boot script at ${scriptaddr} && " \
> - "source ${scriptaddr}; echo XSPI: SCRIPT FAILED: continuing...;\0"
> + "bootcmd_" #devtypel #instance "=" \
> + "devnum_xspi=" #instance "; run " #devtypel "_boot\0" \
>
> #define BOOTENV_DEV_NAME_XSPI(devtypeu, devtypel, instance) \
> - "xspi0 "
> + ""
>
> #define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na)
>
> @@ -127,6 +131,7 @@
> #define CFG_EXTRA_ENV_SETTINGS \
> ENV_MEM_LAYOUT_SETTINGS \
> BOOTENV \
> + BOOTENV_DEV_SHARED_XSPI \
> DFU_ALT_INFO
> #endif
>
Applied.
M
More information about the U-Boot
mailing list