[PATCH u-boot 0/3] Revert broken Bootmenu commits

Tom Rini trini at konsulko.com
Sun Jun 25 16:52:13 CEST 2023


On Sun, Jun 25, 2023 at 09:50:39AM +0200, Pali Rohár wrote:
> On Saturday 24 June 2023 12:58:07 Tom Rini wrote:
> > On Sat, Jun 24, 2023 at 10:50:41AM +0200, Pali Rohár wrote:
> > > On Tuesday 20 June 2023 11:20:35 Simon Glass wrote:
> > > > Hi Tom, Pali,
> > > > 
> > > > On Wed, 14 Jun 2023 at 20:51, Tom Rini <trini at konsulko.com> wrote:
> > > > >
> > > > > On Sun, Jun 11, 2023 at 02:53:21PM +0200, Pali Rohár wrote:
> > > > >
> > > > > > These 3 commits broke support for U-Boot Bootmenu on Nokia N900.
> > > > > > Issues were reported more than month ago, but nobody reacted to them.
> > > > > > So revert these broken commits for now, to fix U-Boot Bootmenu support.
> > > > > >
> > > > > > With these revered commits, U-Boot Bootmenu from master branch is
> > > > > > working fine again on Nokia N900.
> > > > > >
> > > > > > Pali Rohár (3):
> > > > > >   Revert "video: Enable VIDEO_ANSI by default only with EFI"
> > > > > >   Revert "menu: Factor out menu-keypress decoding"
> > > > > >   Revert "menu: Make use of CLI character processing"
> > > > > >
> > > > > >  cmd/bootmenu.c        |   9 ++--
> > > > > >  cmd/eficonfig.c       |  12 ++---
> > > > > >  common/cli_getch.c    |  12 ++---
> > > > > >  common/menu.c         | 122 ++++++++++++++++++++++++++----------------
> > > > > >  drivers/video/Kconfig |   7 +--
> > > > > >  include/cli.h         |   4 +-
> > > > > >  include/menu.h        |  17 +-----
> > > > > >  7 files changed, 91 insertions(+), 92 deletions(-)
> > > > >
> > > > > Following up over here, while
> > > > > https://patchwork.ozlabs.org/project/uboot/patch/20230612201434.861700-1-sjg@chromium.org/
> > > > > addresses some of the issues, but not all (as it clearly isn't working
> > > > > in all of the cases Pali has explained), looking in to the VIDEO_ANSI
> > > > > part of this too, all three of these reverts are related seemingly to
> > > > > something escape-character related.  I'm not taking any of the revert
> > > > > commits in just yet, but will by the next -rc if we don't have something
> > > > > that fixes all of the issues.
> > > > 
> > > > I did send a series [1] with a fix for the nokia_rx51 keyboard driver,
> > > > including the previous ansi-code patch. Given that:
> > > > 
> > > > - this problem doesn't seem to manifest on other boards
> > > > - it does not cause any CI test to fail
> > > > - there seem to be bugs in the nokia_rx51 implementation which are a
> > > > possible/likely cause
> > > > - the nokia_rx51 CI uses a 10-year-old out-of-tree QEMU
> > > > - the problem goes away if debugging is added, suggesting it is
> > > > related to timing
> > > > 
> > > > ...I don't think a revert is appropriate.
> > > 
> > > Unfortunately it does not fix this issue :-( New patch series from [1]
> > > applied on top of the master branch has still issue with DOWN key on
> > > emulated UART terminal.
> > > 
> > > > Pali, can you please take a look and see if you can debug what is
> > > > actually going on? Here is my guess:
> > > > 
> > > > 1. When an arrow key is pressed, cli_ch_process() handles it by being
> > > > passed the codes in sequence: \e [ B
> > > > 2. Calling cli_ch_process() with ichar = 0 causes it to think the
> > > > sequence is finished: \e [ \0 B   (this doesn't work since the \0 ends
> > > > the sequence)
> > > > 3. nokia_rx51 keyboard driver is returning '\0' even when key codes
> > > > are pending, causing cli_ch_process() to be told that the sequence is
> > > > done
> > > 
> > > I can look at it later, but I'm loosing motivation to do whole debugging
> > > for another issue again, because for the last year my fixes and other
> > > patches were stalled and u-boot devs show me that they are not
> > > interested even in commenting them. I do not want to work again on
> > > something which would be ignored.
> > 
> > Well, unless your changes here break something else, I don't think a fix
> > for your problem will be ignored.
> 
> This is something which I read here more times in the past... and
> reality was different.
> 
> Should I remind you that there are waiting eMMC fixes for mvebu and
> again discussion about them stalled? Or rather should I say that it is
> again ignored?

No, you should just say they're still waiting for review.  Since they're
waiting for review. The MMC custodian has been asked to review them, and
hasn't yet. And they don't appear to be super critical changes, and they
conflict with other series, so yes, they'll get picked up when the
custodian has time to review everything.

> I have already spend time on this and have done everything needed to
> make bootmenu working again. I have also prepared patches which are
> fixing this problem and which were also tested.

Note that "I reverted the commit" is not a fix.

> And if you want something more from me then you show me why this time it
> would be different, and again empty promises.

What I'd like is for you to not assume worst-faith. If you can fix the
problem quickly at this point it'll get reviewed (assuming Simon has
time, next week is EOSS) and merged if it's a safe enough looking fix.
Otherwise it'll get in v2023.10.

> > > Hence, now I did only smaller - but still important - task: Locate exact
> > > commits which broke particular feature and prepare reverts on top of the
> > > master branch which _really_ fix the broken functionality - and make
> > > code working again.
> > 
> > Unfortunately you're also the only person able to replicate the problem,
> > and Simon has tried (and posted fixes to your platform for other issues,
> > and debugging patches to hopefully making finding the problem easier).
> 
> Have somebody else even tried to reproduce this issue on any other HW
> board or any other qemu board?

The summary of Simon's thread where he tried to fix this problem is that
only your platform still has a problem here.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20230625/67b43fea/attachment.sig>


More information about the U-Boot mailing list