[PATCH 0/5] rockchip: Fix SPI flash SPL and payload overlap

[Jonas Karlman]

This series fixes a build issue introduced in commit 5713135ecc75
("rockchip: rockpro64: Build u-boot-rockchip-spi.bin"), reported by
Peter Robinson.

Closer inspection into how SPI flash is used revealed that current
payload offset, 0x60000, is not enough to accommodate a worst-case
scenario and may overlap SPL if written to SPI flash.

This series fixes this by adjusting payload offset to 0xE0000, adjusting
SPL max size to 0x40000, enables build of u-boot-rockchip-spi.bin for
affected boards and update the SPI flashing documentation.

Series depend on [1] for a clean apply.

[1] https://patchwork.ozlabs.org/patch/1800173/

Jonas Karlman (5):
  rockchip: rk3399-rockpro64: Fix SPL max size and SPI flash payload
    offset
  rockchip: rk3399-pinebook-pro: Fix SPL max size and SPI flash payload
    offset
  rockchip: rk3399-pinephone-pro: Fix SPL max size and SPI flash payload
    offset
  rockchip: rk3399-roc-pc: Fix SPL max size and SPI flash payload offset
  doc: rockchip: Update SPI flashing instruction

 arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi  |  4 ---
 arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi |  4 ---
 arch/arm/dts/rk3399-roc-pc-u-boot.dtsi        |  4 ---
 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi     |  4 ---
 configs/pinebook-pro-rk3399_defconfig         |  4 ++-
 configs/pinephone-pro-rk3399_defconfig        |  4 ++-
 configs/roc-pc-mezzanine-rk3399_defconfig     |  4 ++-
 configs/roc-pc-rk3399_defconfig               |  4 ++-
 configs/rockpro64-rk3399_defconfig            |  5 ++--
 doc/board/rockchip/rockchip.rst               | 26 ++++---------------
 10 files changed, 19 insertions(+), 44 deletions(-)

-- 
2.41.0