[PATCH 3/5] rockchip: rk3399-pinephone-pro: Fix SPL max size and SPI flash payload offset

[Jonas Karlman]

TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x40000, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB

Use 0xE0000 (896 KB) as the payload offset in SPI flash, this allows
for a payload of 3168 KB before env offset start to overlap.

Also add CONFIG_ROCKCHIP_SPI_IMAGE=y to build a bootable SPI flash
image, u-boot-rockchip-spi.bin.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
 arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi | 4 ----
 configs/pinephone-pro-rk3399_defconfig        | 4 +++-
 2 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
index 347243fe4793..cabf0a9dae89 100644
--- a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
@@ -10,10 +10,6 @@
 	chosen {
 		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
 	};
-
-	config {
-		u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
-	};
 };
 
 &rng {
diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig
index e4a8beeb1abb..b09211f4eb6e 100644
--- a/configs/pinephone-pro-rk3399_defconfig
+++ b/configs/pinephone-pro-rk3399_defconfig
@@ -12,6 +12,7 @@ CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinephone-pro"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_PINEPHONE_PRO_RK3399=y
 CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
@@ -25,7 +26,7 @@ CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinephone-pro.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
-CONFIG_SPL_MAX_SIZE=0x2e000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x400000
@@ -35,6 +36,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0xE0000
 CONFIG_TPL=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
-- 
2.41.0